XTL1017 • Seam Weld Surface Mount Package • Good Frequency Stability over Temperature • Excellent Reliability • Complies with Directive 2002/95/EC (RoHS) 30.00000 MHz Crystal Unit 2 > The XTL1017 is a surface mount 3.2 x 2.5 mm crystal unit for use in wireless telecommunications devices, especially where an ultra-miniature package is needed for mobility. SM3225-4 Case Electrical Characteristics Characteristic Sym Notes Minimum FO Nominal Frequency Typical Maximum 30.00000 Mode of Oscillation Units MHz Fundamental Storage Temperature Range -40 +105 °C Operating Temperature Range -40 +105 °C Frequency Stability over Operating Temperature Range ±20 ppm (referred to the value at 25°C) FL Frequency Make Tolerance Equivalent Series Resistance ±15 ppm @ 25 °C ±3 °C ESR 40 Nominal Drive Level CL Load Capacitance Aging Ω 10 uW 20 pF ±1.0 ppm/year @25 °C Insulation Resistance 500 MΩ min @ 100 VDC Stanard Shipping Quantity on 178 mm (7”) Reel 3000 Lid Symbolization (in addition to Lot and/or Date Codes) units Line1: 1017 Line2: YWWS C r y s ta l E q u iv a le n t C ir c u it 2 C E S R 4 O CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. The design, manufacturing process, and specifications of this device are subject to change without notice. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 3 XTL1017 - 2/3/10 4-Terminal Surface-Mount Seam Weld Case 3.2 x 2.5 mm Nominal Footprint 0.7 ±0.1 2.5 ±0.1 3.2 ±0.1 Electrical Connections Pin Connection 1 GND 2 IN/OUT 3 GND 4 IN/OUT 2.1 pin 1 pin 4 0.8 1.5 pin 3 1.5 1.2 1.4 pin 2 0.9 Package Dimensions (mm) Dot Indicates Pin 1 2.1 Footprint (mm) 1017 YWWS 1017 YWWS 1017 YWWS Package Orientation in Carrier Tape www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 3 XTL1017 - 2/3/10 Reel Dimensions Tape Dimensions www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 3 XTL1017 - 2/3/10