Illuminated Switches Short Body Pushbuttons Square t Bushing Mounting YB Series Single & Double Pole (9.4) .370 (1.2) x (2.0)Typ .047 x .079 M15.8 P1 (3.7) .146 (0.5) Typ .020 NC NO 6 L -+ 2 (2.8) Typ .110 (10.9) .429 (15.0) Sq .591 (18.0) Sq .709 YB15SKW01-12-CB 1 (9.7) .382 5 4 COM (7.3) .288 (6.0) .236 (11.1) .437 (24.3) .957 (8.3) .327 NO 3 Single pole models do not have terminals 4, 5, & 6. Round t Panel Seal Single & Double Pole (9.4) .370 (0.5) .020 (3.7) .146 (1.2) x (2.0)Typ .047 x .079 (0.5) Typ .020 M15.8 P1 NC NO 6 L -+ 1 (2.8) Typ .110 (0.5) .020 (3.0) .118 (15.0) Dia .591 (18.0) Dia .709 YB26WCKW01-12-EB Rectangular t Snap-in Mounting (10.9) .429 (5.3) (24.3) .209 .957 Latchdown Position NO 3 2 (9.7) .382 5 4 COM (6.0) .236 (11.1) .437 (7.3) .288 Single pole models do not have terminals 4, 5, & 6. (3.7) .146 (1.2) x (2.0)Typ .047 x .079 (0.5) Typ .020 NC NO 3 (2.8) Typ .110 (7.3) .288 (21.0) .827 (8.3) .327 (24.0) .945 (24.3) .957 YB15NKW01-5C-JC 6 L -+ 2 1 NO (15.0) .591 (18.0) .709 5 (9.7) .382 4 COM (6.0) .236 (11.1) .437 Illuminated Switches Single & Double Pole Single pole models do not have terminals 4, 5, & 6. How to order: 1 2 3 4 5 6 9 8 7 YB 1 POLES: SPDT DPDT 2 CIRCUITS: ON-(ON) 5 ON-ON (Alternate 6 Action with Latchdown) 3 PANEL SEAL: Blank Without Panel Seal W With Panel Seal (Bushing Mount only) 4 SHAPES: Bushing Mounting Square S Round C Rectangular R Snap-in Mounting Square K Round M Rectangular N 5 HOUSING: Black only K 6 CONTACTS & RATINGS: Silver W Rated 3A @ 125V AC Gold G Rated 0.4VA @ 28V AC/DC 7 TERMINALS: Solder Lug/.110“(2.8mm) 01 Quick Connect Straight PC 03 1 2 [email protected] 8 LAMPS: Type1: Incandescent Lamp 5-volt 05 12 12-volt Type2: LED for Spot Illuminated Cap 2-volt (No Resistor) 5-volt 12-volt 24-volt Red 1C02 1C05 1C12 1C24 Amber 1D02 1D05 1D12 1D24 Green 1F02 1F05 1F12 1F24 Red/Green 1CF02 1CF05 1CF12 1CF24 Type 3: Bright LED No Resistor 5-volt 12-volt 24-volt Red 5C 5C05 5C12 5C24 Amber 5D 5D05 5D12 5D24 Green 5F 5F05 5F12 5F24 Type 4: Super Bright LED White 6B 6F Green Blue 6G Type 5: Bicolor LED for Full Face Illuminated Red/Green 2-volt (No Resistor) 5-volt 2CF02 2CF05 9 CAPS TYPES & COLORS: Solid Cap: Lens/Insert Colors (for type 1 lamp) BB White/White CB Red/White EB Yellow/White FB Green/White Blue/White GB Spot Illuminated Cap: Lens/Insert Colors (for type 2 lamp) Clear/Black JA Clear/White JB Clear/Red JC JE Clear/Yellow JF Clear/Green LED Cap: Lens/Insert Colors (for type 3 lamp) Clear/White JB Clear/Red JC Clear/Amber JD JF Clear/Green LED Cap: Lens/Insert Colors (for type 4 lamp) Clear/White JB LED Cap: Lens/Insert Colors (for type 5 lamp) Clear/White JB 12-volt 24-volt 2CF12 2CF24 www.greatecs.com 1 Illuminated Switches Short Body Pushbuttons YB Series General Specifications Electrical Capacity (Resistive Load) Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. 50 milliohms maximum for silver; 100 milliohms maximum for gold 200 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 1,000,000 operations minimum for momentary circuit 200,000 operations minimum for maintained circuit 100,000 operations minimum Single pole: 1.47N for nonsealed; 1.67N for sealed Double pole: 2.75N for nonsealed; 2.94N for sealed Nonshorting (break-before-make) Pretravel .059” (1.5mm); Overtravel .059” (1.5mm); Total Travel .118” (3.0mm) Materials & Finishes Housing/Bezel: Snap-in Frame: Base: Movable Contactor: Movable Contacts: Stationary Contacts: Switch Terminals: Lamp Terminals: Glass fiber reinforced polyamide (UL94V-0) Stainless steel Diallyl phthalate resin (UL94V-0) Phosphor bronze with silver or gold plating Silver alloy with silver plating or brass with gold plating Silver alloy or copper with gold plating Phosphor bronze with tin plating Phosphor bronze with tin plating Illuminated Switches Power Level (silver): Logic Level (gold): Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Sealing: –25°C through +50°C (–13°F through +122°F) Note: When used with a polyvinyl chloride splash cover, the lowest limit is 0°C (32°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s 2 ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) IP65 of IEC60529 standard for panel seal models Installation Mounting Torque: Soldering Time & Temperature: 0.785Nm (6.95 lb t in) maximum Manual Soldering: See Profile A in Supplement section. Standards & Certifications Flammability Standards: UL & C-UL Recognized: CSA Certified: [email protected] UL94V-0 housing & base All models recognized at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum; UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch. UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch. All solder models certified at 3A @125V or 250V AC or 0.4VA @ 28V AC/DC maximum; CSA File Nos. 023535-0-000; add “/C” to end of part number to order CSA mark on switch. www.greatecs.com 2 Illuminated Switches Short Body Pushbuttons YB Series CUTAWAY POLE & CIRCUIT Plunger Position ( ) = Momentary Connected Terminals Normal Down Normal Down 1-2 Pole Model SP YB15 *YB16 ON ON (ON) ON 1-3 YB25 *YB26 ON ON (ON) ON 1-3 4-6 DP Throw & Switch/Lamp Schematics Notes: Switch is marked with NC, NO, COM, L+, L–. Lamp circuit is isolated and requires external power source. 1 (COM) SPDT 3 1 (COM) 1-2 4-5 (-) L L (+) (-) L 4 DPDT 3 L (+) 2 2 6 5 * When in latchdown position for the alternate circuit, cap position is .020” (0.5mm) above the built-in bezel. PANEL SEAL W Without Panel Seal Bushing Mounting Snap-in Mounting With Panel Seal Bushing Mounting only Illuminated Switches No Code Supplied with mounting nut and o-ring AT089. Supplied with mounting nut. SHAPES & MOUNTING TYPES Bushing Mounting S Square C Snap-in Mounting R Round K Rectangular Square M N Round Rectangular Bezel-barrier is an integral part of the switch body. TERMINALS 01 03 Solder Lug/ .110” (2.8mm) Quick Connect Epoxy Seal (7.3) .288 (2.0) (2.8) .079 .110 (1.2) .047 Thk = (0.5) .020 Straight PC Epoxy Seal (0.6) R .024 (2.8) .110 (1.2) .047 Thk = (0.5) .020 [email protected] (3.7) Typ .146 3 (4.4) .173 6 2 Single Pole 1 (3.0) .118 (5.55) CL .219 5 (4.85) Typ .191 (1.6) Dia Typ .063 Double Pole (3.7) Typ .146 3 2 4 1 (3.0) Typ .118 CL (4.85) Typ .191 (1.6) Dia Typ .063 (5.55) Typ .219 www.greatecs.com 3 Illuminated Switches Short Body Pushbuttons YB Series INCANDESCENT LAMP & SOLID CAP Electrical specifications are determined at a basic temperature of 25°C. Lamp circuit is independent of switch operation. For dimension drawing of lamp see the Accessories & Hardware section. AT611 12 Voltage V 5V AC 12V AC Current I 115mA 60mA .150 .150 MSCP Endurance T-1 Bi-pin 05 Hours 7,000 average Ambient Temperature Range –25°C ~ +50°C Solid Cap for Incandescent Lamp Lens/Insert Colors Available: White/ White CB Red/ White EB FB GB Translucent Colored Lens (12.2) .480 (4.0) .157 AT3001 Square (12.2) .480 (4.0) .157 (12.2) .480 Green/ White Translucent White Insert (21.0) .827 (15.0) .591 (15.0) Sq .591 Yellow/ White AT3002 Round (4.0) .157 Translucent White Seal/Filter AT3003 Rectangular Blue/ White Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Filter) Incandescent Lamp AT611 BICOLOR LED & LED CAPS The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Bicolor AT621 2CF Red/Green T-1 1 ⁄ 2 Bi-pin AT621 Bicolor LED 2-volt 6-element w/o Resistor (+) Bicolor LED is translucent white in OFF state. Lens/Insert Colors Available: JB Clear/White [email protected] 12 24 Unit 60 60 20 12 mA mA IFM Continuous Forward Current IF 45 45 15 10 Forward Voltage VF 2.1 5 12 24 V Current Reduction Rate Above 25°C ΔI F 0.80 –––– –––– –––– mA/°C Ambient Temperature Range (-) AT621 Bicolor LED 5-volt 6-element with Resistor –25 ~ +50 (-) (+) LED Caps (12.2) .480 (4.0) .157 05 Forward Peak Current AT3004 Square (15.0) Sq .591 02 (15.0) .591 AT621 Bicolor LED 12 & 24-volt 6-element with Resistor Illuminated Switches BB (15.0) Dia .591 °C (+) (-) As shown for Red; Reverse polarity for Green AT3006 Rectangular Transparent Clear Lens (21.0) .827 AT3005 Round (15.0) Dia .591 (12.2) .480 (4.0) .157 Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Diffuser) (12.2) .480 (4.0) .157 Transparent White Insert Translucent White Seal/Diffuser Bicolor LED AT621 www.greatecs.com 4 Illuminated Switches Short Body Pushbuttons YB Series SPOT ILLUMINATED CAP WITH BUILT-IN LED This spot-illuminated cap is factory assembled. (15.0) Sq .591 (2.0) .079 (12.2) .480 (4.0) .157 (5.0) .197 (5.0) .197 (8.8) .346 (+) (-) AT3010 Square (-) AT3011 Round Colors Available: Red (8.8) .346 (+) (+) 1D (12.2) .480 (4.0) .157 (5.0) .197 (8.8) .346 (-) 1C (2.0) .079 (12.2) .480 (4.0) .157 Amber 1F Green 1CF Red/Green AT3012 Rectangular 02 05 12 24 w/o Resistor w/Resistor w/Resistor w/Resistor Unit Forward Peak Current IFM 20 15 15 12 mA Continuous Forward Current IF 15 12.5 12.5 10 mA Forward Voltage VF 2.1 5 12 24 V Reverse Peak Voltage (not applicable to bicolor) V RM 5 5 5 5 V Current Reduction Rate Above 25°C ΔI F 0.27 –––– –––– –––– mA/°C Ambient Temperature Range –25 ~ +50 Without Resistor 2-volt (+) (-) Single Color °C With Resistor 5, 12, 24-volt (+) (-) (+) Bicolor (-) Single Color (+) Illuminated Switches (2.0) .079 (21.0) .827 (15.0) .591 (15.0) Dia .591 (-) Bicolor The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires external power source. Single color LEDs are colored in OFF state. Bicolor LED is translucent white in OFF state. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Lens/Insert Colors Available: JA Clear Lens Clear/Black Colored Insert JB Clear/White JC Clear/Red JE Clear/Yellow JF Clear/Green Seal Example part number when cap is ordered separate from switch: AT3010F02JA for a Square Spot Illuminated Cap with Green 2-volt LED without resistor Clear Lens and Black Insert Built-in LED (integral part of the cap) Materials: Polycarbonate (Lens & Insert) and Thermoplastic Elastomer (Seal) [email protected] www.greatecs.com 5 Illuminated Switches Short Body Pushbuttons YB Series BRIGHT LED & LED CAP The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Electrical Specifications for Bright LED without Resistor Bright AT628 Colors Available: 5C Red 5D Amber 5F No Code Green LED Colors (+) (-) No Resistor Unit Red Amber Green Forward Peak Current IFM 40 40 40 mA Continuous Forward Current IF 26 26 26 mA Forward Voltage VF 1.9 2.0 2.2 V Reverse Peak Voltage V RM 4 4 4 V Current Reduction Rate Above 25°C ΔI F T-1 Bi-pin Ambient Temperature Range 0.50 mA/°C –25 ~ +50 °C Bright AT634 5C Red 5D Amber 5F Green 12 24 Unit Forward Peak Current IFM — — — mA Continuous Forward Current IF 25 20 10 mA Forward Voltage VF 5 12 24 V Reverse Peak Voltage V RM 4 8 16 V Current Reduction Rate Above 25°C ΔI F –––– –––– –––– mA/°C T-1 1 ⁄ 4 Bi-pin Ambient Temperature Range AT634 5-volt, 2-element with Resistor 05 (+) (-) AT634 12-volt, 4-element with Resistor –25 ~ +50 (+) (-) Illuminated Switches Electrical Specifications for Bright LED with Resistor Colors Available: °C AT634 (+) 24-volt, 4-element with Resistor (-) Cap for Bright LED Lens/Insert Colors Available: JB AT3006 Rectangular (15.0) Sq .591 (21.0) .827 (15.0) .591 Clear/White JC Clear/Red JD Clear/Amber JF AT3004 Square (12.2) .480 (4.0) .157 (12.2) .480 (4.0) .157 AT3005 Round Transparent Clear Lens (15.0) Dia .591 Translucent Colored Insert Translucent White Seal/Diffuser Clear/Green (12.2) .480 (4.0) .157 Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Diffuser) [email protected] Bright LEDs AT628 AT634 www.greatecs.com 6 Illuminated Switches Short Body Pushbuttons YB Series SUPER BRIGHT LED & LED CAPS The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Electrical Specifications for Super Bright LED Super Bright AT625G Blue AT631B White AT632F Green T-1 Bi-pin Attention Electrostatic Sensitive Devices (+) (-) Colors: 6B 6F 6G White Green Blue Unit Forward Peak Current IFM 30 30 30 mA Continuous Forward Current IF 20 20 20 mA Forward Voltage VF 3.6 3.5 3.6 V Reverse Peak Voltage V RM 5 5 5 V Current Reduction Rate Above 25°C ΔI F Ambient Temperature Range 0.50 mA/°C –25 ~ +50 °C AT3014 Square AT3015 Round (15.0) Sq .591 (12.2) .480 (4.0) .157 Illuminated Switches Cap for Super Bright LED AT3016 Rectangular (15.0) .591 (15.0) Dia .591 (12.2) .480 (4.0) .157 (21.0) .827 (12.2) .480 (4.0) .157 Transparent Clear Lens Lens/Insert Colors Available: JB Translucent White Insert Clear/White Translucent White Seal/Diffuser Materials: Polycarbonate (Lens & Insert) Thermoplastic Elastomer (Seal/Diffuser) [email protected] Super Bright LEDs AT625 AT631 AT632 www.greatecs.com 7 Illuminated Switches Short Body Pushbuttons YB Series OPTIONAL ACCESSORIES Dust Covers and Protective Guards reduce depth of switch behind panel by .047” (1.2mm). Panel Thickness Range with Dust Cover or Protective Guards: Bushing Mounting .020” ~ .150” (0.5mm ~ 3.8mm) Snap-in Mounting .020” ~ .091” (0.5mm ~ 2.3mm) Panel Seal .020” ~ .118” (0.5mm ~ 3.0mm) Dust/Splash Cover Dust Cover AT4115 Dust Cover for Snap-in or Bushing Mount (16.2) .638 Splash Cover AT4115 (5.9) .232 AT4115 AT089 AT541 (5.2) .205 (29.2) 1.150 (23.2) .913 AT4115 (16.0) Dia .630 Snap-in Mount Panel Seal Materials: Lid: Polyvinyl Chloride Note: AT089 o-ring supplied Base: Polyamide with panel seal model. O-ring: Nitrile butadiene rubber (20.0) Dia .787 (0.5) .020 Protective Guard Assembled Cap Height AT4072 Protective Guard Opens 90° Closes manually AT541 (1.2) .047 (12.0) .472 Illuminated Switches AT4115 Splash Cover and AT541 O-ring for Bushing Mount (22.9) .902 Materials: Lid: Polycarbonate Base: Glass Fiber Reinforced Polycarbonate (1.2) .047 (23.9) .941 (6.6) .260 (11.2) .441 (16.0) Dia .630 Spring Loaded Protective Guard AT4175 Spring Loaded Protective Guard Opens 180° Closes automatically Assembled Bezel Height (12.5) .492 (23.4) .921 (16.0) Dia .630 (45.0) Min* 1.772 AT4175 (1.2) .047 (23.9) .941 (11.4) .449 (16.0) Dia .630 180 (12.5) .492 (23.4) .921 (23.9) .941 (24.0) Min .945 Materials : Lid: Polycarbonate Base: Glass Fiber Reinforced Polyamide Coil Spring: Stainless Steel * Minimum dimension allows opening of cover to 180 [email protected] www.greatecs.com 8 Illuminated Switches Short Body Pushbuttons YB Series ASSEMBLY INSTRUCTIONS Cap Assembly LED Polarity & Orientation in Lamp Socket Attention Spot Electrostatic Sensitive Devices Plunger Pinhole Grip Slot Projections Switch Body Positive Lamp Socket Negative Lamp Socket Part Number Flat Flat (-) (+) Flat (+) (+) (-) (-) (+) (-) Top View of Switch Spot Illuminated Cap with Built-in LED LED AT628 AT634 LEDs AT625G AT631B AT632F LED AT621 The following installation tools are available: AT106 Socket Wrench for bushing mounting (Overtightening the mounting nut AT092 may damage the switch housing.); AT109 Cap Extractor; AT111 Lamping Tool. Further details and dimensions are shown in the Accessories and Hardware section. Illuminated Switches LEGENDS General information and basic specifications are presented here for customers who want to do their own legends. Recommended Methods: Laser Etch on clear lens, Screen Print or Pad Print on lens. Epoxy based ink is recommended. Shaded Areas Are Printable Areas for Lens ON (13.48) (15.0) .531 .591 (13.48) Sq .531 Lens (0.76) Typ .030 (13.48) Dia .531 (15.0) Dia .591 (15.0) Sq .591 (0.76) Typ .030 (0.76) Typ .030 (19.48) .767 (21.0) .827 (0.76) Typ .030 Shaded Areas Are Printable Areas for Film Insert ON Film Insert Filter (9.88) (11.4 .389 .449 (10.68) (12.2) .420 .480 Seal Cap Base (10.68) Sq .420 (12.2) Sq .480 (0.76) Typ .030 (0.76) Typ .030 (10.68) .420 (0.76) Typ .030 (0.76) Typ .030 (16.68) .657 (18.2) .717 (12.2) .480 (0.76) Typ .030 Film Material and Thickness: Recommended Print Method: Clear Polyester, 4 mil max. Screen Print; Epoxy based ink is recommended. Additional Methods Additional methods for legends are engraving the lens and laser printing on film inserts. Maximum depth for engraving is .012” (0.3 mm) on the cap lens. Enamel paint is recommended to fill the engraved area. [email protected] www.greatecs.com 9