Part Number: www.SunLED.com ZFMOK10C2 SURFACE MOUNT DISPLAY Features ●0.4INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●I.C. COMPATIBLE. ●MECHANICALLY RUGGED. ●GRAY FACE,WHITE SEGMENT. ●PACKAGE:250PCS/REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. ●RoHS COMPLIANT. MOK Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. MOK (InGaAlP) Unit Forward Voltage (Typ.) (IF=10mA) VF 2.0 V 4.The gap between the reflector and PCB shall not exceed 0.25mm. Forward Voltage (Max.) (IF=10mA) VF 2.5 V Absolute Maximum Ratings (TA=25°C) Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=10mA) λP 610 nm Wavelength of Dominant Emission (Typ.) (IF=10mA) λD 601 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 29 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF 3.Specifications are subject to change without notice. MOK (GaP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 195 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZFMOK10C2 Emitting Color Orange Published Date : FEB 29, 2008 Emitting Material InGaAlP °C Luminous Intensity (IF=10mA) ucd min. typ. 12000 41190 Drawing No : SDSA5358 Wavelength nm λP Description 610 Common Cathode. Rt. Hand Decimal V4 Checked : Shin Chi P.1/4 Part Number: www.SunLED.com ZFMOK10C2 SURFACE MOUNT DISPLAY MOK Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 29, 2008 Drawing No : SDSA5358 V4 Checked : Shin Chi P.2/4 Part Number: www.SunLED.com ZFMOK10C2 SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15) Tape Specification (Units : mm) Published Date : FEB 29, 2008 Drawing No : SDSA5358 V4 Checked : Shin Chi P.3/4 Part Number: www.SunLED.com SURFACE MOUNT DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : FEB 29, 2008 ZFMOK10C2 ZFMOK10C2 Drawing No : SDSA5358 V4 Checked : Shin Chi P.4/4