Part Number: ZFMYK07A2 SURFACE MOUNT DISPLAY www.SunLED.com Features ● 0.3 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● I.C. COMPATIBLE. ● MECHANICALLY RUGGED. ● GRAY FACE,WHITE SEGMENT. ● PACKAGE : 300PCS / REEL. ● MOISTURE SENSITIVITY LEVEL : LEVEL 4. ● RoHS COMPLIANT. Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. The gap between the reflector and PCB shall not exceed 0.25mm. 4. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MYK (InGaAIP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 175 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZFMYK07A2 Emitting Color Yellow Published Date : MAR 04,2008 Emitting Material InGaAlP °C Luminous Intensity (IF=10mA) ucd min. typ. 8000 35390 Drawing No : SDSA5332 MYK Unit (InGaAlP) Forward Voltage (Typ.) (IF=10mA) VF 1.95 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 590 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 590 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF Wavelength nm λP Description 590 Common Anode. Rt. Hand Decimal V4 Checked : B.L.LIU P.1/4 Part Number: ZFMYK07A2 SURFACE MOUNT DISPLAY www.SunLED.com MYK Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 04,2008 Drawing No : SDSA5332 V4 Checked : B.L.LIU P.2/4 Part Number: ZFMYK07A2 SURFACE MOUNT DISPLAY www.SunLED.com Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Published Date : MAR 04,2008 Drawing No : SDSA5332 V4 Checked : B.L.LIU P.3/4 Part Number: SURFACE MOUNT DISPLAY www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 04,2008 ZFMYK07A2 Drawing No : SDSA5332 ZFMYK07A2 V4 Checked : B.L.LIU P.4/4