Part Number: www.SunLED.com ZFUY20C-A SURFACE MOUNT DISPLAY PRELIMINARY SPEC Features ● 0.8 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● I.C. COMPATIBLE. ● MECHANICALLY RUGGED. ● GRAY FACE,WHITE SEGMENT. ● PACKAGE : 200PCS / REEL. ● MOISTURE SENSITIVITY LEVEL : LEVEL 4. ● RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. The gap between the reflector and PCB shall not exceed 0.25mm. 4.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) V V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=10mA) λP 590 nm Wavelength of Dominant Emission (Typ.) (IF=10mA) λD 588 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 140 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Published Date : FEB 28, 2008 1.95 2.5 Forward Current Yellow VF VF V ZFUY20C-A Forward Voltage (Typ.) (IF=10mA) Forward Voltage (Max.) (IF=10mA) 5 Emitting Color Unit Unit VR Part Number UY (GaAsP/ GaP) UY (GaAsP/ GaP) Reverse Voltage Storage Temperature Operating Characteristics (TA=25°C) Emitting Material GaAsP/GaP °C Luminous Intensity (IF=10mA) ucd min. typ. 1200 4290 Drawing No : SDSA6446 Wavelength nm λP Description 590 Common Cathode. Rt. Hand Decimal V1 Checked : Shin Chi P.1/4 Part Number: www.SunLED.com ZFUY20C-A SURFACE MOUNT DISPLAY UY Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 28, 2008 Drawing No : SDSA6446 V1 Checked : Shin Chi P.2/4 Part Number: www.SunLED.com ZFUY20C-A SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Published Date : FEB 28, 2008 Drawing No : SDSA6446 V1 Checked : Shin Chi P.3/4 Part Number: www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : FEB 28, 2008 ZFUY20C-A SURFACE MOUNT DISPLAY Drawing No : SDSA6446 ZFUY20C-A V1 Checked : Shin Chi P.4/4