Part Number: www.SunLED.com ZFVG14A SURFACE MOUNT DISPLAY Features ● 0.56 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● I.C. COMPATIBLE. ● MECHANICALLY RUGGED. ● GRAY FACE,WHITE SEGMENT. ● PACKAGE : 400PCS / REEL. ● MOISTURE SENSITIVITY LEVEL : LEVEL 4. ● RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Operating Characteristics (TA=25°C) 3.Specifications are subject to change without notice. 4. The gap between the reflector and PCB shall not exceed 0.25mm. Absolute Maximum Ratings (TA=25°C) VG (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZFVG14A Emitting Color Green Published Date : FEB 29, 2007 Emitting Material InGaAlP °C Luminous Intensity (IF=10mA) ucd min. typ. 8000 35490 Drawing No : SDSA5381 VG (InGaAlP) Unit Forward Voltage (Typ.) (IF=10mA) VF 2.0 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=10mA) λP 574 nm Wavelength of Dominant Emission (Typ.) (IF=10mA) λD 570 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Wavelength nm λP Description 574 Common Anode. Rt. Hand Decimal V2 Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZFVG14A SURFACE MOUNT DISPLAY VG Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 29, 2007 Drawing No : SDSA5381 V2 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZFVG14A SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Published Date : FEB 29, 2007 Drawing No : SDSA5381 V2 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com ZFVG14A SURFACE MOUNT DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : FEB 29, 2007 ZFVG14A Drawing No : SDSA5381 V2 Checked : B.L.LIU P.4/4