ZGL41-100 thru ZGL41-200A Vishay Semiconductors formerly General Semiconductor Surface Mount Glass Passivated Zeners Zener Voltage 100 to 200V Steady State Power 1.0W DO-213AB SOLDERABLE ENDS 0 D2 = D1 + - 0.008 (0.20) 1st BAND Mounting Pad Layout 0.157 (4.00) MAX D1= 0.105 0.095 (2.67) (2.41) D2 0.022 (0.56) 0.018 (0.46) 0.049 (1.25) MIN 0.118 (3.00) MIN 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) Dimensions in inches and (millimeters) 0.256 (6.50) REF 1st band denotes type and positive end (cathode) Features Mechanical Data • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • For surface mount applications • Glass passivated junction • Low Zener impedance • Low regulation factor • High temperature soldering guaranteed: 250°C/10 seconds at terminals Case: JEDEC DO-213AB molded plastic body over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Red band denotes Zener diode and positive end (cathode) Mounting Position: Any Weight: 0.0046 oz., 0.116 g Packaging codes/options: 26/5K per 13" Reel (12mm tape), 60K/box 46/1.5K per 7" Reel (12mm tape), 30K/box Maximum Ratings and Electrical Characteristics (T A = 25°C unless otherwise noted) Operating junction and storage temperature range: TJ, TSTG: -55°C to +150°C Nominal Zener Voltage at IZT Maximum Zener Dynamic Impedance ZZT at ZZK at IZK IZT (Ω) (Ω) (mA) Maximum DC Reverse Maximum Max. Instantaneous Leakage Current Surge Current Forward Voltage at VR (Note 2) at 200mA IR (µA) VR (V) IRM (mAdc) VF (V) Type VZ (V) Test Current IZT (mA) ZGL41-100 100 3.7 250 3100 0.25 1.0 76.0 10.0 1.5 ZGL41-110 110 3.4 300 4000 0.25 1.0 83.6 9.1 1.5 ZGL41-120 120 3.1 380 4500 0.25 1.0 91.2 8.3 1.5 ZGL41-130 130 2.9 450 5000 0.25 1.0 98.8 7.7 1.5 ZGL41-140 140 2.7 525 5500 0.25 1.0 106.4 7.1 1.5 ZGL41-150 150 2.5 600 6000 0.25 1.0 114.0 6.7 1.5 ZGL41-160 160 2.3 700 6500 0.25 1.0 121.6 6.3 1.5 ZGL41-170 170 2.2 800 6750 0.25 1.0 129.2 5.9 1.5 ZGL41-180 180 2.1 900 7000 0.25 1.0 136.9 5.6 1.5 ZGL41-190 190 2.0 1050 7500 0.25 1.0 144.4 5.3 1.5 ZGL41-200 200 1.9 1200 8000 0.25 1.0 152.0 5.0 1.5 (Note 1) Notes: (1) Standard voltage tolerance is ±10%, Suffix A = ±5% (2) Surge current is a non-repetitive, 8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method (3) Maximum steady state power dissipation is 1.0 watt at TT = 75°C Document Number 88409 02-May-02 www.vishay.com 1 ZGL41-100 thru ZGL41-200A Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25°C unless otherwise noted) Fig. 2 -- Typical Zener Impedance 10,000 1.0 60Hz Resistive or Inductive Load ZZ -- Dynamic Zener Impedance (Ω) PM(AV) -- Average Power Dissipation (W) Fig. 1 -- Maximum Continuous Power Dissipation 0.75 0.5 0.25 P.C.B. Mounted on 0.31 x 0.31 x 0.08 (8 x 8 x 2mm) Copper Areas Pads 0 25 50 75 100 125 150 VZ = 200V VZ = 180V 1,000 VZ = 150V VZ = 120V 100 VZ = 100V 10 0.1 175 Terminals Temperature (°C) Fig. 4 -- Typical Reverse Characteristics 10 1 Pulse Width = 300µs 1% Duty Cycle TJ = 25°C 0.1 Instantaneous Reverse Current (µA) Instantaneous Forward Current (A) 10 1 TJ = 100°C 0.1 TJ = 25°C 0.01 0.6 0.8 1 1.2 1.4 1.6 0 Instantaneous Forward Voltage (V) 20 40 60 80 100 Percent of Rated Zener Voltage (%) Fig. 5 -- Steady State Power Derating Curve Fig. 6 -- Typical Zener Voltage 10 220 200 Tested at Rated IZT 180 160 140 120 100 80 100 110 120 130 140 150 160 170 180 190 200 VZ — Zener Voltage (V) www.vishay.com 2 IZT -- Test Zener Current (mA) θVZ -- Temperature Coefficient (mV/°C) 10 IZT -- Zener Test Current (mA) Fig. 3 -- Typical Instantaneous Forward Characteristics 0.01 0.4 1 1 0.1 100 150 200 250 VZ -- Zener Voltage (V) Document Number 88409 02-May-02