ZARLINK ZL60212TBD

ZL60212
880 nm High-Performance Single-chip
DUPLEX
Data Sheet
May 2004
Ordering Information
ZL60212TBD TO-46 Package with lens
ZL60212TDD ST Housing
ZL60212TGD SMA Housing
-55°C to +125°C
Description
This single-chip device operates as both an Emitter
and Detector, and transmits data over a single fiber in
half-duplex mode; therefore, reducing both fiber and
component costs when compared with traditional
approaches.
Features
•
•
•
•
•
Ø4.7
Ø1.5
Half Duplex over single fiber
Single chip solution
High speed
Industrial temperature range
Typical Rated Fiber couple power of 120 µW
0.6
3.7
Applications
•
•
•
•
Industrial control systems
Long reach RS232
Security systems
Single fiber Datacom
14
0.4
CASE
ANODE
CATHODE
2.5
5.4
Bottom View
All dimensions in mm.
The diode chip is isolated from the case.
TO-46 Package with Lens
1
Zarlink Semiconductor Inc.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc.
Copyright 2003-2004, Zarlink Semiconductor Inc. All Rights Reserved.
ZL60212
Data Sheet
Optical and Electrical Characteristics - Case Temperature 25°C
Parameter
Symbol
Min
Typ
Pfiber
80
120
Fiber-coupled Power
(Figures 1, 2, and 3)
(Table 1)
Emitting
Mode
Receiving
Mode
Note 1:
Note 2:
Rise and Fall Time
(10-90%)
trtf
7
Bandwidth
(3 dB)
fc
50
Peak Wavelength
λp
Spectral Width (FWHM)
∆λ
50
Forward Voltage
(Figure 5)
VF
1.9
Responsivity
(Figures 6, 7, and 8)
(Table 2)
R
Rise and Fall Time
(10-90%)
trtf
7
Bandwidth
fc
Capacitance
Dark Current
860
880
0.10
Max
10
890
Unit
µW
IF = 60 mA
(See notes 1 and
2)
ns
IF = 60 mA
(no bias)
Graded
Index
MHz
IF = 60 mA
NA = 0.275
nm
IF = 60 mA
nm
IF = 60mA
V
IF = 60mA
A/W
VR = 1 V
λ = 880 nm
2.1
0.15
10
Test Condition
Fiber
62.5/125 µm
Fiber
62.5/125 µm
ns
VR = 1 V
RL = 50 Ω
(no bias)
Graded
Index
50
MHz
VR = 1 V
RL = 50 Ω
NA = 0.275
C
30
pF
VR = 1 V, f 1 MHz
Id
10
nA
VR = 1 V
50
Measured at the exit of 100 meters of fiber.
Rated Fiber coupled power apply only on the TO-46 package, for housing options fiber coupled power is typically 10% less.
Absolute Maximum Ratings
Parameter
Symbol
Limit
Storage Temperature
Tstg
-55 to +125°C
Operating Temperature (derating: Figure 4)
Top
-55 to +125°C
Electrical Power Dissipation (derating: Figure 4)
Ptot
160 mW
IF
80 mA
IFRM
130 mA
Reverse Voltage
VR
2.0 V
Soldering Temperature (2 mm from the case for 10 sec.)
Tsld
260°C
Continuous Forward Current (f<10 kHz)
Peak Forward Current (duty Cycle<50%, f>1 MHz
2
Zarlink Semiconductor Inc.
ZL60212
Data Sheet
Thermal characteristics
Parameter
Symbol
Min.
Typ.
Max.
Unit
Thermal Resistance - Infinite Heat Sing
Rthjc
200
°C/W
Thermal Resistance - No Heat Sink
Rthja
500
°C/W
Temperature Coefficient - Optical Power
dP/dTj
-0.4
%/°C
Temperature Coefficient - Wavelength
dl/dTj
0.3
nm/°C
Temperature Coefficient - Responsivity
dR/dTj
0.2
%/°C
Temperature Coefficient - Dark Current
dLd/dTj
2.5
%/°C
Typical Fiber-Coupled Power
Core Diameter/Cladding Diameter
Numerical Aperture
50/125 µm
0.20
62.5/125 µm
0.275
55 µW
120 µW
Table 1 - Typical Fiber-Coupled Power
Typical Responsivity
Core Diameter/Cladding Diameter
Numerical Aperture
50/125 µm
0.20
62.5/125 µm
0.275
0.15 A/W
0.15 A/W
Table 2 - Typical Responsivity
3
Zarlink Semiconductor Inc.
ZL60212
Relative Fiber-Coupled Power
%
80
60
40
φ
20
r = opt.
c = 62.5 µm
See Note 1.
0
0.5
1.0
1.5
2.0
60
Note 1
40
r
20
z
0
20
40
80
100 µm
Figure 2 - r - Radial Displacement of Fiber
mW
300
Max. Electrical Power Dissipation
mA
100
50% Duty Cycle
80
60
40
DC
20
Heat Sinked
0
40
80
120
160
200
Infinite
Heat Sink
100
No Heat Sink
0
220%
0
50
100
Operating Temperature
Forward Current
Figure 3 - Forward Current
A/W
Responsivity
0.2
100
0
150oC
Figure 4 - Operating Temperature
mA
200
Forward Current
60
r - Radial Displacement of Fiber
Figure 1 - z - Axial Displacement of Fiber
Relative Fiber-coupled Power
z = opt.
= 62.5 µm
See Note 1.
c
80
0
2.5 3.0 mm
z - Axial Displacement of Fiber
0
100
φ
Relative Fiber-Coupled Power
%
100
Data Sheet
0.1
0
1
2
0
3V
20
40
60
80
100 0C
Emitter and Detector Temperature
Forward Voltage
Figure 5 - Forward Voltage
Figure 6 - Emitter and Detector Temperature
4
Zarlink Semiconductor Inc.
Data Sheet
AW
AW
0.2
0.2
Responsivity
Responsivity
ZL60212
0.1
0
-50
-30
0
10
30
0.1
0
50 0C
870
Emitter Minus Detector Temperature
880
890nm
Emitter Wavelength
Figure 8 - Emitter Wavelength
Figure 7 - Emitter Minus Detector Temperature
5
Zarlink Semiconductor Inc.
BOTTOM VIEW ( 10 : 1 )
SIDE VIEW
13,46`0,76
3,8
2,54
0,6
0,03 (3x)
n0,45 +
-
0,05 (3x)
n1,17 +
-
0,04
n4,7
0
R2,7
45°
R0,2 max (4x)
0,3 max glass overmould (2x)
R0,4 max
2`
0,
3
3,
6
1,
0
Lens n1.5`0.05
NOTES:1. All dimensions in mm.
2. General tol. ISO-2768-mK.
3. Coating: Case: Ni 1,5-2,5 µm.
Header: Ni 2-3 µm / Au min 1,32 µm.
Package code
© Zarlink Semiconductor 2002. All rights reserved.
ISSUE
1
ACN
JS004 076R1 A
DATE
22-MAR-03
APPRD. TD/BE
Previous package codes
TB
Drawing type
Package drawing, TO-46 with lens
Title
JS004076
For more information about all Zarlink products
visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively “Zarlink”) is believed to be reliable.
However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such
information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or
use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual
property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in
certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink.
This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part
of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other
information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the
capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute
any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and
suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does
not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in
significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink’s conditions of sale which are available on request.
Purchase of Zarlink’s I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system
conforms to the I2C Standard Specification as defined by Philips.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc.
Copyright Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE