ZM2BG60W Part Number: 3.0mmx1.5mm SMD CHIP LED LAMP www.SunLED.com PRELIMINARY SPEC Features z 3.0mmx1.5mm SMT LED,1.4mm THICKNESS. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE z RoHS SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). VF 3.2 V Forward Voltage (Max.) (IF=20mA) VF 3.7 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 525 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 535 nm °C Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 39 nm V Capacitance (Typ.) (VF=0V, f=1MHz) C 65 pF 3.Specifications are subject to change without notice. M2BG (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Power Dissipation PT 111 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Electrostatic Discharge Threshold (HBM) Part Number ZM2BG60W Emitting Color Green Published Date : FEB 23, 2008 1000 Emitting Material InGaN Unit Forward Voltage (Typ.) (IF=20mA) 2. Tolerance is ± 0.20(0.008") unless otherwise noted. Absolute Maximum Ratings (TA=25°C) M2BG (InGaN) mW Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA6271 min. typ. 1200 1790 V1 Wavelength nm λP Viewing Angle 2 θ 1/2 525 70 ° Checked : B.L.LIU P.1/4 Part Number: ZM2BG60W 3.0mmx1.5mm SMD CHIP LED LAMP www.SunLED.com M2BG Published Date : FEB 23, 2008 Drawing No : SDSA6271 V1 Checked : B.L.LIU P.2/4 Part Number: ZM2BG60W 3.0mmx1.5mm SMD CHIP LED LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 23, 2008 Drawing No : SDSA6271 V1 Checked : B.L.LIU P.3/4 Part Number: 3.0mmx1.5mm SMD CHIP LED LAMP www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : FEB 23, 2008 ZM2BG60W Drawing No : SDSA6271 ZM2BG60W V1 Checked : B.L.LIU P.4/4