Part Number: XZMDKCBD62WLF-1 1.6x1.25mm BI-COLOR SMD CHIP LED LAMP PRELIMINARY SPEC Features z 1.6mmx1.25mm SMT LED, 0.65mm THICKNESS. z BI-COLOR,LOW z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE z RoHS POWER CONSUMPTION. SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. Absolute Maximum Ratings (TA=25°C) MDK (InGaA lP) CB-D (AlInG aN) Unit Reverse Voltage VR 5 5 V Forward Current IF 30 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 150 mA Power Dissipation PT 75 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number XZMDKCBD62WLF-1 Emitting Color Emitting Material Red InGaAlP Blue AlInGaN Published Date : JAN 03, 2007 °C CB-D (AlInG aN) Unit Forward Voltage (Typ.) (IF=20mA) VF 1.95 3.5 V Forward Voltage (Max.) (IF=20mA) VF 2.5 4.0 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 650 468 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 635 470 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 28 25 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 35 100 pF Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : XDSA6345 MDK (InGaA lP) Wavelength nm λP min. typ. 70 148 650 50 89 468 V4 Checked : B.L.LIU Viewing Angle 2 θ 1/2 120° P.1/4 Part Number: XZMDKCBD62WLF-1 1.6x1.25mm BI-COLOR SMD CHIP LED LAMP MDK Published Date : JAN 03, 2007 Drawing No : XDSA6345 V4 Checked : B.L.LIU P.2/4 Part Number: XZMDKCBD62WLF-1 1.6x1.25mm BI-COLOR SMD CHIP LED LAMP CB-D Published Date : JAN 03, 2007 Drawing No : XDSA6345 V4 Checked : B.L.LIU P.3/4 Part Number: XZMDKCBD62WLF-1 1.6x1.25mm BI-COLOR SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : JAN 03, 2007 Drawing No : XDSA6345 V4 Checked : B.L.LIU P.4/4