XZDG53W-3 Part Number: 1.6X0.8mm SMD CHIP LED LAMP Features z 1.6mmx0.8mm SMT LED, 0.45mm max. thickness. z Low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ± 0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) V Reverse Current (Max.) (VR=5V) IR 50 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 515 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 525 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 45 pF IF 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Power Dissipation PD 102.5 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Published Date : AUG 11, 2010 V 4.1 Forward Current Green 3.3 VF V XZDG53W-3 VF Forward Voltage (Max.) (IF=20mA) 5 Emitting Color Forward Voltage (Typ.) (IF=20mA) Unit VR Part Number Unit DG (InGaN) Reverse Voltage Storage Temperature DG (InGaN) Emitting Material InGaN °C Lens-color Water Clear Drawing No : XDSB5080 Luminous Intensity (IF=20mA) mcd min. typ. 280 447 V1 Wavelength nm λP Viewing Angle 2 θ 1/2 515 120° Checked : B.L.LIU P.1/4 Part Number: XZDG53W-3 1.6X0.8mm SMD CHIP LED LAMP DG Published Date : AUG 11, 2010 Drawing No : XDSB5080 V1 Checked : B.L.LIU P.2/4 Part Number: XZDG53W-3 1.6X0.8mm SMD CHIP LED LAMP Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : AUG 11, 2010 Drawing No : XDSB5080 V1 Checked : B.L.LIU P.3/4 Part Number: XZDG53W-3 1.6X0.8mm SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : AUG 11, 2010 Drawing No : XDSB5080 XZDG53W-3 V1 Checked : B.L.LIU P.4/4