ZMD56W Part Number: 3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP www.SunLED.com Features z 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACK LIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MD (InGaAlP) Unit Operating Characteristics (TA=25°C) VF 1.9 V mA Forward Voltage (Max.) (IF=20mA) VF 2.5 V 185 mA Reverse Current (Max.) (VR=5V) IR 10 uA PT 75 mW λP 640 nm TA -40 ~ +85 Wavelength of Peak Emission (Typ.) (IF=20mA) Tstg -40 ~ +85 Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 628 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 27 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 45 pF VR 5 V Forward Current IF 30 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation Operating Temperature °C Part Number ZMD56W Unit Forward Voltage (Typ.) (IF=20mA) Reverse Voltage Storage Temperature MD (InGaAlP) Emitting Color Red Published Date : FEB 25, 2008 Emitting Material InGaAlP Lens-color Water Clear Drawing No : SDSA2573 Luminous Intensity (IF=20mA) mcd min. typ. 110 297 V9 Wavelength nm λP Viewing Angle 2 θ 1/2 640 120° Checked : B.L.LIU P.1/4 Part Number: ZMD56W 3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP www.SunLED.com MD Published Date : FEB 25, 2008 Drawing No : SDSA2573 V9 Checked : B.L.LIU P.2/4 Part Number: ZMD56W 3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25, 2008 Drawing No : SDSA2573 V9 Checked : B.L.LIU P.3/4 Part Number: PACKING & LABEL SPECIFICATIONS Published Date : FEB 25, 2008 ZMD56W 3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP www.SunLED.com Drawing No : SDSA2573 ZMD56W V9 Checked : B.L.LIU P.4/4