Part Number: www.SunLED.com ZMG55W-3 3.2x1.6mm SMD CHIP LED LAMP Features z3.2mmx1.6mm zLOW zWIDE POWER CONSUMPTION. VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS SMT LED,1.8mm THICKNESS. SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MG (GaP) Unit 2.2 V mA Forward Voltage (Max.) (IF=20mA) VF 2.5 V 140 mA Reverse Current (Max.) (VR=5V) IR 10 uA PT 62.5 mW λP 565 nm TA -40 ~ +85 Wavelength Of Peak Emission (Typ.) (IF=20mA) Tstg -40 ~ +85 Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF 5 V Forward Current IF 25 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation Operating Temperature ZMG55W-3 Unit VF VR Part Number MG (GaP) Forward Voltage (Typ.) (IF=20mA) Reverse Voltage Storage Temperature Operating Characteristics (TA=25°C) Emitting Color Green Published Date : FEB 23, 2008 Emitting Material GaP °C Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA1233 min. typ. 10 49 V6 Wavelength nm λP Viewing Angle 2 θ 1/2 565 40° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZMG55W-3 3.2x1.6mm SMD CHIP LED LAMP MG Published Date : FEB 23, 2008 Drawing No : SDSA1233 V6 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZMG55W-3 3.2x1.6mm SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 23, 2008 Drawing No : SDSA1233 V6 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com 3.2x1.6mm SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 23, 2008 ZMG55W-3 Drawing No : SDSA1233 ZMG55W-3 V6 Checked : B.L.LIU P.4/4