Part Number: www.SunLED.com ZURUY57W-1 3.0x2.5mm SURFACE MOUNT LED LAMP Features z 3.0mmx2.5mm SMT LED, 1.4mm THICKNESS. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACK LIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z INNER LENS TYPE z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. z Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Operating Characteristics (TA=25°C) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.0 2.1 V Forward Voltage (Max.) (IF=20mA) VF 2.5 2.5 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 627 590 nm Wavelength of Dominant Emission (Typ.) λD (IF=20mA) 625 588 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 45 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 20 pF 5 5 V Forward Current IF 30 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 160 140 mA Power Dissipation PT 75 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 ZURUY57W-1 Emitting Color Emitting Material Red GaAsP/GaP Yellow GaAsP/GaP Published Date : FEB 25 , 2008 Unit UY (GaAsP/ GaP) VR Part Number UY (GaAsP/ GaP) UR (GaAsP /GaP) Reverse Voltage Storage Temperature UR (GaAsP/ GaP) °C Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA3809 Wavelength nm λP min. typ. 7 19 627 4 14 590 V4 Checked : B.L.LIU Viewing Angle 2 θ 1/2 100° P.1/5 Part Number: www.SunLED.com ZURUY57W-1 3.0x2.5mm SURFACE MOUNT LED LAMP UR Published Date : FEB 25 , 2008 Drawing No : SDSA3809 V4 Checked : B.L.LIU P.2/5 Part Number: www.SunLED.com ZURUY57W-1 3.0x2.5mm SURFACE MOUNT LED LAMP UY Published Date : FEB 25 , 2008 Drawing No : SDSA3809 V4 Checked : B.L.LIU P.3/5 Part Number: www.SunLED.com ZURUY57W-1 3.0x2.5mm SURFACE MOUNT LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25 , 2008 Drawing No : SDSA3809 V4 Checked : B.L.LIU P.4/5 Part Number: www.SunLED.com 3.0x2.5mm SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 25 , 2008 ZURUY57W-1 Drawing No : SDSA3809 ZURUY57W-1 V4 Checked : B.L.LIU P.5/5