Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Installation terminals General ordering data Order No. Part designation Version EAN Qty. Product notes Note, technical data Product description Note, accessories 0471880000 NT 10/35 10X3 BL Neutral conductor modular terminal, 10 mm², Busbar connection, PA 66, blue, TS 35 4008190083045 50 pc(s). Tightening torque via disconnector is 0.5 ... 0.8 Nm. Fix 10 mm² stranded connection with 2 Nm tightening torque. These NT modular terminals are prescribed for insulation measurements without detaching the conductors according to VDE standards for places of public assembly. Refer to the "Accessories" section for PEN bridges and additional clamping-yoke versions. Use of twin wire-end ferrules on request. Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version blue on side Yes No TS 35 PA 66 No 2 right - 50 °C, + 100 °C SAK Series Screwed Snap-on V2 Neutral conductor disconnect terminal CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 300 V 50 A AWG 14 AWG 8 Conductors for clamping (additional connection) Stranded, max. Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 10 mm² 0.5 mm² 10 mm² Conductors for clamping (rated connection) Clamping range, min. 0.5 mm² -1- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Installation terminals Conductors for clamping (rated connection) Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. 16 mm² Busbar connection screwed on side 2 12 mm M4 1.0 x 5.5 mm 1.2...1.6 Nm B6 0.5 mm² 16 mm² 0.5 mm² 10 mm² 0.5 mm² 10 mm² 0.5 mm² 10 mm² 0.5 mm² 10 mm² AWG 14 AWG 8 Dimensions Width Height of lowest version Length 10 mm 44 mm 45 mm N-conductor disconnect terminal For N-busbar 3 x 10 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 10 mm² 400 V 6 kV 57 A IEC 60947-7-1 57 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 300 V 50 A AWG 14 AWG 8 -2- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Installation terminals Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC001257 EC001257 27-14-11-20 27-14-11-38 27-14-11-38 Similar products Order No. 0499280000 Part designation NT 16/35 10X3 BL 0471780000 NT 2.5/35 10X3 BL 0501470000 NT 6/35 10X3 KRG/BL Version Neutral conductor modular terminal, 16 mm², Busbar connection, PA 66, blue, TS 35 Neutral conductor modular terminal, 2.5 mm², Screw connection, PA 66, blue, TS 35 Neutral conductor modular terminal, 6 mm², Screw connection, PA 66, blue, TS 35 -3-