FERROXCUBE 4S3

FERROXCUBE
DATA SHEET
4S3
Material specification
New data
2008 Sep 01
Ferroxcube
Material specification
4S3
4S3 SPECIFICATIONS
Wideband EMI-suppression material specified on
impedance and optimized for frequencies from 30 to
1000 MHz.
SYMBOL
µi
B
Z(1)
ρ
TC
density
CONDITIONS
VALUE
25 °C; ≤10 kHz;
0.25 mT
25 °C; 10 kHz;
3000 A/m
100 °C; 10 kHz;
3000 A/m
25 °C; 30 MHz
25 °C; 50 MHz
25 °C; 200 MHz
25 °C; 500 MHz
DC; 25 °C
UNIT
250 ± 20 %
≈ 360
µ's , µ''s
mT
2
10
≈ 310
≥ 10
≥ 40
≥ 200
≥ 250
≈ 105
≥ 250
≈ 4600
µ''s
Ω
10
Ωm
°C
kg/m3
1
1
500
400
400
300
300
200
200
100
100
Fig.2
2008 Sep 01
T ( o C)
25 oC
100 oC
B
(mT)
µi
300
10
3
Complex permeability as
a function of frequency.
handbook, halfpage
4S3
100
f (MHz)
MFP217
MFP216
500
handbook, halfpage
102
10
Fig.1
1. Measured on a bead ∅5 × ∅2 × 10 mm.
0
4S3
µ's
Note
0
50
MFP215
10 3
handbook, halfpage
0
100
500
Initial permeability as a
function of temperature.
0
100
200
4S3
1000
2000
H (A/m)
Fig.3 Typical B-H loops.
262
Ferroxcube
Material specification
4S3
MFP228
150
4S3
Z
(Ω)
100
50
0
1
10
102
f (MHz)
103
Fig.4 Impedance as a function of frequency,
measured on a bead ∅5 × ∅2 × 10 mm.
2008 Sep 01
263
Ferroxcube
Material specification
4S3
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development
This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications  These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
Prototype
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Design-in
These products are recommended for new designs.
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
2008 Sep 01
264