Preliminary Data Sheet PD-20683 09/04 50WQ10G SCHOTTKY RECTIFIER 5.5 Amp IF(AV) = 5.5Amp VR = 100V Description/ Features Major Ratings and Characteristics The 50WQ10G surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Characteristics Values Units IF(AV) Rectangular 5.5 A VRRM 100 V IFSM @ tp = 5 µs sine 480 A Low forward voltage drop High frequency operation VF @ 5 Apk, TJ = 125°C 0.63 V Guard ring for enhanced ruggedness and long term reliability TJ range - 40 to 150 °C waveform Popular D-PAK outline Small foot print, surface moutable Case Styles 50WQ10G Base Cathode 4, 2 1 3 Anode Anode D-PAK 1 50WQ10G Preliminary Data Sheet PD-20683 09/04 Voltage Ratings Part number VR 50WQ10G Max. DC Reverse Voltage (V) 100 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 50WQ... IF(AV) Max. Average Forward Current Units Conditions 5.5 A 50% duty cycle @ TC = 135°C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 300 3µs Sine or 3µs Rect. pulse Surge Current * See Fig. 7 100 Following any rated load condition and with rated VRRM applied 480 3µs Sine or 3µs Rect. pulse 165 6ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 6.0 mJ IAR Repetitive Avalanche Current 0.5 A 50WQ... Units Max. Forward Voltage Drop 0.77 V @ * See Fig. 1 0.91 V @ 10A 0.63 V @ 0.74 V @ 10A 6ms Sine or 6ms Rect. pulse A One anode pin connected Two anode pins connected TJ = 25 °C, IAS = 0.5 Amps, L = 40 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM (1) Max. Reverse Leakage Current * See Fig. 2 (1) VF(TO) Threshold Voltage Conditions 5A TJ = 25 °C 5A 0.22 mA TJ = 25 °C 4 mA TJ = 125 °C 0.47 V TJ = TJ max. 21.46 mΩ TJ = 125 °C VR = rated VR rt Forward Slope Resistance CT Typical Junction Capacitance 183 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 5.0 nH Measured lead to lead 5mm from package body (1) Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 50WQ... Units TJ Max. Junction Temperature Range (*) -40 to 150 °C Tstg Max. Storage Temperature Range °C RthJC Max. Thermal Resistance -40 to 150 3.0 Conditions °C/W DC operation * See Fig. 4 Junction to Case wt Approximate Weight Case Style D-Pak Device Marking (*) dPtot dTj 2 < 1 Rth( j-a) 0.3 (0.01) g (oz.) Similar to TO-252AA 50WQ10G thermal runaway condition for a diode on its own heatsink 50WQ10G Preliminary Data Sheet PD-20683 09/04 100 Reverse Current - I R (mA) 100 10 TJ= 150°C 125°C 1 100°C 0.1 75°C 0.01 50°C 0.001 25°C 0.0001 0 10 20 30 40 50 60 70 80 90 100 Reverse Voltage - V R (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage TJ = 150°C TJ = 125°C 1000 Junction Capacitanc e - C T (pF) TJ = 25°C 10 1 0 0.5 1 1.5 2 2.5 3 TJ= 25°C 100 10 3.5 0 20 40 60 80 100 Forward Voltage Drop - VFM (V) Reverse Voltage - V R(V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 Thermal Impedance Z thJC (°C/ W) Instantaneous Forward Current - I F (A) 1000 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 0.1 t2 Notes: Single Pulse (Thermal Resistance) 0.01 0.00001 0.0001 0.001 1. Duty factor D = t 1/ t 2 2. Peak TJ = PDM x Z thJC+ TC 0.01 0.1 1 t 1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics 3 50WQ10G Preliminary Data Sheet PD-20683 09/04 5.5 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 5 145 Average Power Loss - (Watts) Allowable Case Temperature - (°C) 150 DC 140 135 Square wave (D = 0.50) 80% Rated V R applied 130 125 0 1 2 4 3.5 3 3 4 5 6 7 2 1.5 1 0 8 Average Forward Current - I F(AV) (A) Non-Repetitive Surge Current - I FSM (A) 0 1 2 anode pins connected 10 10 3 4 5 6 7 8 Fig. 6 - Forward Power Loss Characteristics 1000 100 2 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current 1 anode pin connected 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 DC RMSLimit 2.5 0.5 see note (2) 120 4.5 50WQ10G Preliminary Data Sheet PD-20683 09/04 Outline Table 2.38 (0.09) 6.73 (0.26) 2.19 (0.08) 6.35 (0.25) 1.14 (0.04) MINIMUM RECOMMENDED FOOTPRINT 0.89 (0.03) 5.46 (0.21) 1.27 (0.05) 5.21 (0.20) 0.58 (0.02) 0.88 (0.03) 0.46 (0.02) 5.97 (0.24) 4 6.45 (0.24) 6.22 (0.24) 1.64 (0.02) 5.97 (0.23) 1 2 5.68 (0.22) 6.48 (0.26) 10.42 (0.41) 10.67 (0.42) 9.40 (0.37) 3 0.51 (0.02) MIN. 1.52 (0.06) 2x 2.54 (0.10) 1.15 (0.04) 2x 3x 1.14 (0.04) 0.76 (0.03) 0.89 (0.03) 0.64 (0.02) 2.28 (0.09) 2x 4.57 (0.18) 1 2 3 4 0.58 (0.02) 1.65 (0.06) 0.46 (0.02) 2x 2.28 (0.09) 2x - Anode - Cathode - Anode - Cathode Base Cathode 4, 2 Modified JEDEC outline TO-262AA Dimensions in millimeters and (inches) 1 3 Anode Anode Marking Information THIS IS A 50WQ10G WITH LOT CODE 5K3A ASSEMBLED ON WW 12, 2000 IN ASSEMBLY LINE "A" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE 50WQ10G DATE CODE YEAR 0 = 2000 WEEK 12 LINE A 5 50WQ10G Preliminary Data Sheet PD-20683 09/04 Tape & Reel Information TR 4.1 (0.16) 3.9 (0.15) 1.85 (0.07) DIA. 1.65 (0.06) 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) 1.65 (0.06) 0.35 (0.01) 0.25 (0.01) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 12.1 (0.48) 11.9 (0.47) 4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 13 (0.52) DIA. 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 7.0 (0.28) 6.8 (0.26) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 22.4 (0.88) TO-252AA Tape & Reel 375 (14.17) DIA. MAX. 6 50 (1.97) DIA. When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. 50WQ10G Preliminary Data Sheet PD-20683 09/04 Ordering Information Table Device Code 50 W Q 10 G TRL - 1 2 3 4 5 6 7 1 - Current Rating (5.5A) 2 - Package 3 W = D-PAK 4 - Q = Schottky Q Series 3 - Voltage Rating: Code x 10 = VRRM (10 = 100V) 4 - Schottky Generation 5 - y None = Tube (75 pieces) 6 - y TR = Tape & Reel y TRL = Tape & Reel (Left Oriented) y TRR = Tape & Reel (Right Oriented) 7 - y none = Standard Production y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed for Q1O1. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/04 7