HMC575LP4 / 575LP4E v00.0506 FREQ. MULTIPLIERS - ACTIVE - SMT 7 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 6 - 9 GHz OUTPUT Typical Applications Features The HMC575LP4 / HMC575LP4E is suitable for: High Output Power: +17 dBm • Wireless Local Loop Low Input Power Drive: -2 to +6 dBm • Point-to-Point & VSAT Radios Fo, 3Fo Isolation: 15 dBc • Test Instrumentation 100 KHz SSB Phase Noise: -140 dBc/Hz • Military & Space Single Supply: +5V@ 90 mA RoHS Compliant 4x4 mm SMT Package Functional Diagram General Description The HMC575LP4 & HMC575LP4E are x2 active broadband frequency multipliers utilizing GaAs PHEMT technology in a leadless RoHS compliant SMT package. When driven by a 3 dBm signal, the multiplier provides +17 dBm typical output power from 6 to 9 GHz. The Fo and 3Fo isolations are 15 dBc with respect to output signal level. This frequency multiplier features DC blocked I/O’s, and is ideal for use in LO multiplier chains for Pt to Pt & VSAT Radios yielding reduced parts count vs. traditional approaches. The low additive SSB Phase Noise of -140 dBc/Hz at 100 kHz offset helps maintain good system noise performance. The HMC575LP4 & HMC575LP4E are compatible with surface mount manufacturing techniques. Electrical Specifi cations, TA = +25° C, Vdd1, Vdd2 = +5V, 3 dBm Drive Level Parameter Min. Frequency Range, Input Frequency Range, Output Output Power 14 Max. Units GHz 6-9 GHz 17 dBm Fo Isolation (with respect to output level) 15 dBc 3Fo Isolation (with respect to output level) 15 dBc Input Return Loss 15 dB Output Return Loss SSB Phase Noise (100 kHz Offset) Supply Current (Idd1 & Idd2) 7 - 94 Typ. 3 - 4.5 12 dB -140 dBc/Hz 90 mA For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC575LP4 / 575LP4E v00.0506 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 6 - 9 GHz OUTPUT Output Power vs. Temperature @ 3 dBm Drive Level Output Power vs. Drive Level 7 25 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 20 20 15 +25C +85C -40C 10 5 15 10 -2dBm 0dBm 2dBm 4dBm 6dBm 5 0 -5 0 5.5 -10 6 6.5 7 7.5 8 8.5 9 6 9.5 6.5 7 OUTPUT FREQUENCY (GHz) 7.5 8 8.5 9 8.5 9 FREQUENCY (GHz) Output Power vs. Supply Voltage @ 3 dBm Drive Level Isolation @ 3 dBm Drive Level 25 25 OUTPUT POWER (dBm) 15 Vdd=4.5V Vdd=5.0V Vdd=5.5V 10 5 15 10 Fo 2Fo 3Fo 5 0 -5 -10 0 -15 6 6.5 7 7.5 8 8.5 9 6 6.5 OUTPUT FREQUENCY (GHz) 7 7.5 8 OUTPUT FREQUENCY (GHz) Output Power vs. Input Power 25 20 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 20 20 FREQ. MULTIPLIERS - ACTIVE - SMT 25 15 10 5 0 6 GHz 7.5GHz 9 GHz -5 -10 -15 -10 -8 -6 -4 -2 0 2 4 6 8 10 INPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 95 HMC575LP4 / 575LP4E v00.0506 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 6 - 9 GHz OUTPUT Output Return Loss vs. Temperature Input Return Loss vs. Temperature 7 - 96 0 0 OUTPUT RETURN LOSS (dB) -2 INPUT RETURN LOSS (dB) FREQ. MULTIPLIERS - ACTIVE - SMT 7 -5 +25C +85C -40C -10 -15 -20 -4 -6 +25C +85C -40C -8 -10 -12 -14 -16 -18 -25 -20 3 3.25 3.5 3.75 4 4.25 4.5 6 6.5 FREQUENCY (GHz) Absolute Maximum Ratings 7 7.5 8 8.5 9 FREQUENCY (GHz) Typical Supply Current vs. Vdd RF Input (Vdd = +5V) +13 dBm Vdd (Vdc) Supply Voltage (Vdd) +6.0 Vdc 4.5 Idd (mA) 89 Channel Temperature 150 °C 5.0 90 Continuous Pdiss (T= 85 °C) (derate 7.9 mW/°C above 85 °C) 512 mW 5.5 91 Thermal Resistance (channel to ground paddle) 127 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC575LP4 / 575LP4E v00.0506 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 6 - 9 GHz OUTPUT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED LAND PATTERN. FREQ. MULTIPLIERS - ACTIVE - SMT 7 Package Information Part Number Package Body Material Lead Finish MSL Rating HMC575LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC575LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H575 XXXX [2] H575 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 97 HMC575LP4 / 575LP4E v00.0506 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 6 - 9 GHz OUTPUT Pin Description FREQ. MULTIPLIERS - ACTIVE - SMT 7 7 - 98 Pin Number Function Description 1, 5 - 14, 18, 19, 21, 23, 24 N/C These pins are internally not connected; however, this product was specified with these pins connected to RF/ DC ground. 2, 4, 15, 17 GND Package bottom must also be connected to RF/DC ground. 3 RFIN Pin is AC coupled and matched to 50 Ohms from 3 - 4.5 GHz. 16 RFOUT Pin is AC coupled and matched to 50 Ohms from 6 - 9 GHz. 20, 22 Vdd2, Vdd1 Supply voltage 5V ± 0.5V. External bypass capacitors of 100 pF and 2.2 μF are required. Interface Schematic Application Circuit Component Value C1, C2 100 pF C3, C4 2.2 μF For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC575LP4 / 575LP4E v00.0506 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 6 - 9 GHz OUTPUT Evaluation PCB FREQ. MULTIPLIERS - ACTIVE - SMT 7 List of Materials for Evaluation PCB 112405 [1] Item Description J1, J2 PCB Mount SRI SMA Connector J3 - J5 DC Pin C1, C2 100 pF Capacitor, 0402 Pkg. C3, C4 2.2 μF Tantalum Capacitor U1 HMC575LP4 / HMC575LP4E x2 Active Multiplier PCB [2] 115270 Eval Board The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 99