Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Features ․P-LCC-4 package ․Optical indicator ․Colorless clear window ․Ideal for backlight and light pipe application ․Inter reflector ․Wide viewing angle ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment ․Available on tape and reel (8mm Tape) ․Pb-free ․The product itself will remain within RoHS compliant version Descriptions ․The 67-22 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax ․Flat backlight for LCD’s, switches and symbols ․Light pipe application ․General use Device Selection Guide Chip Emitted Color Type Material G3 GaP Pale Green G3 GaP Pale Green Resin Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：1 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T CL 3 4 2 1 3 Yellow Green Chip1 2 4 Green Chip2 Red 2.8±0.2 1 0.7±0.1 2.2±0.1 Package Dimensions 3.2±0.2 3.5±0.2 0.15±0.05 0.8±0.1 1.9±0.2 0.5±0.1 2.4±0.1 2.8±0.2 2.7±0.2 For reflow soldering(propose) 1.6 1.8 0.7 1.8 2.2 0.8±0.1 Note: The tolerance unless mentioned is ±0.1mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：2 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V 30 mA 60 mA 100 mW Forward Current G3 IF G3 Peak Forward Current (Duty 1/10 @ 1KHz) Power Dissipation G3 IFP G3 G3 Pd G3 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow soldering：260 ℃ for 10 sec. Hand soldering：350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：3 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Symbol G3 IV G3 2θ1/2 Peak Wavelength λp Dominant Wavelength λd Spectrum Radiation Bandwidth △λ Forward Voltage VF Reverse Current IR G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 Min. Typ. Max. Unit 4.5 10.0 36.0 mcd ----- 120 ----- deg ----- 565 ----- nm 563.5 ----- 571.5 nm ----- 30 ----- nm 1.7 2.0 2.4 V ----- ----- 10 μA Condition IF =10mA VR=5V Notes: 1. Tolerance of Luminous Intensity：±11% 2. Tolerance of Dominant Wavelength：±1nm 3. Tolerance of Forward Voltage：±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：4 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Bin Range of Dominant Wavelength Chip Bin Code Min. Max. C13 563.5 565.5 C14 565.5 567.5 C15 567.5 569.5 C16 569.5 571.5 G3 Unit Condition nm IF=10mA Notes: 1. Tolerance of Dominant Wavelength: ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：5 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Typical Electro-Optical Characteristics Curve Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 50 Forward Current IF (mA) Relative Luminous Intensity (%) 100 75 50 25 0 500 600 650 550 Wavelength λ (nm) 40 30 20 10 0 1.6 700 10 1 -60 -40 -20 0 20 40 60 80 100 2.0 2.2 1000 f=1KHz Duty=1/10 10 1 0 10 2 1 10 10 Forward Current I F (mA) Radiation Diagram Forward Current Derating Curve 0° Forward Current IF (mA) 40 10° 30 3 10 Ta=25°C 20° 30° 40° 1.0 10 2.6 100 Ambient Temperature Ta (°C) 20 2.4 Relative Luminous Intensity vs. Forward Current Ta=25°C Relative Luminous Intensity (%) Relative Luminous Intensity (%) 100 1.8 Forward Voltage V (V) F Relative Luminous Intensity vs. Ambient Temperature 1000 Ta=25°C 0.9 50° 0.8 60° 70° 0.7 80° 90° 0 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：6 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX MSL-4 Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerance unless mentioned is ±0.1mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：7 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs. Per Reel Note: The tolerance unless mentioned is ±0.1mm. Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：8 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃Min. 10sec. 6 Min. 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 10 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH. 1000 Hrs. 22 PCS. 0/1 H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：9 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 72 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260 °C Max 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：10 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Page：11 of 11 Device No.：DSE-0000324 Prepared date：22-Dec-2008 Prepared by：Teresa