Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T Features y y y y y y y y y y P-LCC-4 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free The product itself will remain within RoHS compliant version. Descriptions y The 67-23 series is available for orange, green, blue and yellow or other color due to the different raw material. y Base on the package design, the device result in wide view angle. Applications y y y y Ideal for coupling into light guides. Substitution of traditional light Optical indicator General applications. Device Selection Guide Chip Emitted Color Resin Color White Water Clear Material InGaN Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T Package Dimensions CL CL 2 1 4 1 0.7±0.1 2.2±0.1 2.8±0.2 3 2 3 4 3.5±0.2 2.8±0.2 0.15±0.05 0.8±0.1 1.9±0.2 2.4±0.1 0.5±0.1 3.2±0.2 2.7±0.2 For reflow soldering(propose) 1.6 1.8 0.7 1.8 2.2 0.8±0.1 Note：Tolerance of Dimension：±0.1mm. Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge (HBM) ESD 1000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity*1 IV 3600 ----- 7200 mcd IF=20mA*2 Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Forward Voltage*2 VF 2.7 ---- 3.5 V IF=20mA Reverse Current*2 IR ----- ----- 50 μA VR=5V *1 When three LED dies are operated simultaneously. *2 For each die. Notes： 1. Tolerance of Luminous Intensity：±11% 2. Tolerance of Forward Voltage：±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T Bin Range of Luminous Intensity Bin Min Max Y2 3600 4500 Z0 4500 7200 Unit Condition mcd IF=20mA Note：Tolerance of Luminous Intensity：±11% Bin Range of Chromaticity Coordinates Group Bin Code A0 E B3 B5 CIE_x CIE_y 0.280 0.248 0.264 0.267 0.283 0.305 0.296 Bin Code CIE_x CIE_y 0.311 0.294 0.307 0.315 0.330 0.339 0.276 0.330 0.318 0.287 0.295 0.307 0.315 0.283 0.305 0.304 0.33 0.304 0.330 0.33 0.36 0.307 0.315 0.33 0.339 0.296 0.276 0.287 0.295 0.307 0.315 0.311 0.294 B6 B4 Condition IF=20mA Note: Tolerance of Chromaticity Coordinates：±0.01 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T The C.I.E. 1931 Chromaticity Diagram 0.36 0.35 0.34 B4 0.33 0.32 y B6 B3 0.31 0.30 B5 0.29 0.28 A0 0.27 0.26 0.25 0.24 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 x Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T Typical Electro-Optical Characteristics Curves Spectrum Distribution Forward Current vs. Forward Voltage Ta=25°C Forward Current 75 50 25 0 400 500 600 700 40 30 20 10 0 2.4 800 Wavelength λ (nm) Forward Current Ambient Temperature Relative luminous intensity (%) Relative luminous intensity (%) 1000 100 10 1 -60 -40 -20 0 20 40 60 80 100 3.8 4.2 2.6 3.0 3.4 Forward Voltage (VF)-volts Relative Luminous Intensity vs Relative Luminous Intensity vs. 1000 Ta=25°C f=1KHz Duty=1/10 100 10 1 0 10 1 2 10 10 Forward Current IF(mA) Ambient Temperature Ta (°C) Radiation Diagram Forward Current Derating Curve 0° 50 Forward Current I (mA) F Ta=25°C 50 I F (mA) Relative luminous intensity (%) 100 Ta=25°C 20° 30° 10° 40 30 40° 1.0 20 10 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 80 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Note: For each die. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T Label Explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions 2.2 0.5 178.0 1.0 60.0 1.0 9.0 1.0 12.0 1.0 13.0 0.5 Note：Tolerances unless dimension ±0.1mm. Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note：Tolerances unless dimension ±0.1mm. Unit = mm Moisture Resistant Packing Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 10 sec. 6 Min. 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260 °C Max 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang Technical Data Sheet Top View LEDs 67-23/T2C-EY2Z0/2T 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 11 Device No. :DSE-0000578 Prepared date: 14 -Sep-2007 Prepared by: Ya-Hui Fang