Freescale Semiconductor, Inc. A FLASH MCU SOLUTION 68HC908GR16 8-bit Microcontroller TARGET APPLICATIONS Freescale Semiconductor, Inc... • Sensors • Industrial and consumer communications • Home appliances • Security systems The 68HC908GR16 utilizes integrated second generation FLASH and is enhanced with embedded, on-chip functions that eliminate the need for external serial components. The 32 kHz phase-locked loop provides cost savings by replacing the need for expensive, high-speed crystals or noisy oscillators. The on-chip timebase module (TBM) further reduces costs by eliminating the need for external real-time clock and wakeup circuitry. Other features of the 68HC908GR16 are an analog-to-digital converter (ADC), a serial communications interface (SCI), a serial peripheral interface (SPI), low-voltage inhibit (LVI) and a watchdog timer. FEATURES BENEFITS HIGH-PERFORMANCE 68HC08 CPU CORE • 8 MHz bus operation at 5V operation for 125 nsec minimum instruction cycle time • 4 MHz bus operation at 3V for 250 nsec minimum instruction cycle time • Efficient instruction set including multiply and divide • 16 flexible addressing modes including stack relative with 16-bit stack pointer • Fully static low-voltage, low-power design with wait and stop modes • Object code compatible with the 68HC05 • Easy to learn and use architecture • C optimized architecture provides compact code INTEGRATED SECOND GENERATION FLASH MEMORY • In-application re-programmable • Extremely fast programming, encoding 64 bytes in as fast as 2 msec • FLASH programming across the 68HC08’s full operating supply voltage with no extra programming voltage • 10K write/erase cycles minimum over temperature • 100K write/erase cycles typical • Flexible block protection and security • Cost-effective programming changes and field software upgrades via in-application programmability and re-programmability • Reduces production programming costs through ultra-fast programming • Allows re-programmable battery-powered applications • Byte-writable for data as well as program memory • Protects code from unauthorized reading and to guard against unintentional erasing/writing of user-programmable segments of code 10-BIT ANALOG-TO-DIGITAL CONVERTER HC08 CPU • 8 channels • Single conversion in 17 µsec KBI 16K Flash 8-ch 10-bit ADC 1K RAM E SCI PLL SPI COP 2-ch 16-bit 2-ch 16-bit Timer LVI Up to 37 GPIO • Fast, easy conversion from analog inputs like temperature, pressure and fluid levels to digital values for CPU processing CLOCK GENERATION MODULE WITH PLL • Programmable clock frequency in integer multiples of external crystal reference • Crystal reference of 32 kHz to 100 kHz • External clock option with or without PLL • Provides high-performance using low-cost, low-frequency reference crystals • Reduces generated noise while still providing high-performance (up to 32 MHz internal clock) FOUR PROGRAMMABLE 16-BIT TIMER CHANNELS • 125 nsec resolution at 8 MHz bus • Free-running counter or modulo up-counter • Each channel independently programmable for input capture, output compare or unbuffered PWM • Pairing timer channels provides a buffered PWM function TIMEBASE MODULE • 8 user-selectable periodic real-time interrupts • Optionally operate in low-power stop mode For More Information On This Product, Go to: www.freescale.com • Provides auto wakeup from low-power stop mode to maintain real-time clock or check external device status such as sensors Freescale Semiconductor, Inc. FEATURES A FLASH MCU SOLUTION ENHANCED SERIAL COMMUNICATIONS INTERFACE 68HC908GR16 PART NUMBER • UART asynchronous communications system • Flexible baud rate generator • Double buffered transmit and receive • Optional hardware parity checking and generation RESALE* RESALE EASY-TO-ORDER DEVELOPMENT TOOL KITS KITMMEVS08GZ16 KITMMDS08GZ16 DESCRIPTION Cost-effective real-time in-circuit emulator kit High-performance real-time in-circuit emulator kit $1450 Freescale Semiconductor, Inc... M68CBL05C M68TC08GZ16FJ32 M68TC08GZ16FA48 M68TQP032SAI M68TQP048SDI • Enables high-speed asynchronous communication $3950 SERIAL PERIPHERAL INTERFACE INDIVIDUAL DEVELOPMENT TOOL COMPONENTS M68MMDS0508 M68MMPFB0508 M68EML08GZ16 BENEFITS High-performance emulator MMEVS platform board Emulation module daughter board Low-noise flex cable 32-pin QFP target head adapter 48-pin DIP target head adapter 32-pin TQPACK 48-pin TQPACK $2950 $395 $495 • Full-duplex 3-wire synchronous transfers • Maximum master bit rate of 4 MHz for 8 MHz system clock • High-speed synchronous communication between multiple MCUs or between MCU and serial peripherals • Cost-effective serial peripheral expansion to EEPROM, high-precision A/D and D/A converters, real-time clocks, etc. $120 $200 $200 $70 $70 COMPUTER OPERATING PROPERLY WATCHDOG TIMER • Issues reset in the event of runaway code APPLICATION NOTES AND ENGINEERING BULLETINS • EB368/D In-circuit Programming of 68HC908GR8 FLASH Memory • AN1218/D HC05 to HC08 Optimization • AN1831/D Using MC68HC908 On-Chip Programming Routines • AN1837/D Non-Volatile Memory Technology Review • AN2093/D Creating Efficient C Code for the MC68HC08 • AN1752/D Data Structures for 8-Bit MCUs • AN1219/D M68HC08 Integer Math Routines • AN1705/D Noise Reduction Techniques for MCU-Based Systems SELECTABLE TRIP POINT LOW-VOLTAGE INHIBIT • Improves reliability by resetting the MCU when voltage drops below trip point • Two trip points allow optimum operation in both 5V and 3V nominal systems • Integration reduces system cost • AN1259: System Design and Layout Techniques for Noise Reduction in MCU-Based Systems • AN1263: Designing for Electromagnetic Compatibility with Single-Chip Microcontrollers • AN1050: Designing for Electromagnetic Compatibility (EMC) with HCMOS Microcontrollers • AN1705: Noise Reduction Techniques for Microcontroller-Based Systems UP TO 37 BIDIRECTIONAL INPUT/OUTPUT (I/O) LINES • 10 mA sink/source capability on all I/O pins • 15 mA sink capability on two I/O pins • Keyboard scan with selectable interrupts on four I/O pins • Software programmable pullups on thirteen I/O pins And many more— see our Web site at http://www.motorola.com/mcu • High-current I/O allows direct drive of LED and other circuits to eliminate external drivers and reduce system costs • Keyboard scan with programmable pullups eliminates external glue logic when interfacing to simple keypads PACKAGE OPTIONS PART NUMBER PACKAGE MC68HC908GR16CFJ MC68HC908GR16VFJ MC68HC908GR16MFJ MC68HC908GR16CFA MC68HC908GR16VFA MC68HC908GR16MFA 32 QFP 32 QFP 32 QFP 48 QFP 48 QFP 48 QFP SAMPLE PACKS PACKAGE KMC908GR16MFJ KMC908GR16MFA 32 QFP 48 QFP TEMPERATURE RANGE -40 to 85°C -40 to 105°C -40 to 125°C -40 to 85°C -40 to 105°C -40 to 125°C TEMPERATURE RANGE -40 to 125°C -40 to 125°C * All prices are manufacturer’s suggested resale for North America. Motorola and the stylized M Logo are registered in the U.S. Patent and Trademark Office. This product incorporates SuperFlash® technology licensed from SST. All other product or service names are the property of their respective owners. © Motorola, Inc. 2003 68HC908GR16FS/D REV 0 For More Information On This Product, Go to: www.freescale.com