Series 75 Metal-Core Conduit 712-387 Straight, 45° & 90° Environmental User-Installable Fitting for Series 75 Flexible Metal-Core Conduit 712 S 387 M 16 12 - 6 A Product Series TO BE USED WITH ADAPTERS AND TRANSITIONS SHOWN ON PAGES G-1 THROUGH G-8 Conduit Type Angular Function H = 45° J = 90° S = Straight Length in 1/2 inch (12.7) increments (Example: 6 = 3.0 inches (76.2)) Minimum Length: Dash No. (Table II) 08 to 24 = 1.50 (50.8) Dash No. (Table II) 32 to 96 = 2.00 (63.5) Basic No. Dash No. (Table II) Material/Finish (Table III) Thread Dash No. (Table I) LENGTH O-RING E CONE LENGTH A THREAD (Table I) CONDUIT F TYP I.D. B C TYP TYP STRAIGHT G J 45° H 90° K 45° © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-14 DASH NO. 08 12 16 20 24 32 40 48 56 64 80 96 TABLE I A THREAD B CLASS 2B MAX 1/2 - 20 UNF .640 (16.3) 5/8 - 24 UNEF .760 (19.3) 3/4 - 20 UNEF .890 (22.6) 7/8 - 20 UNEF 1.024 (26.0) 1 - 20 UNEF 1.152 (29.3) 1 5/16 - 18 UNEF 1.488 (37.8) 1 1/2 - 18 UNEF 1.676 (42.6) 1 3/4 - 18 UNS 1.960 (49.8) 2 - 18 UNS 2.210 (56.1) 2 1/4 - 16 UN 2.460 (62.5) 2 3/4 - 16 UN 2.930 (74.4) 3 1/4 - 16 UN 3.450 (87.6) DASH NO. 08 12 16 20 24 32 40 48 56 64 80 96 CONDUIT I.D. .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) E .75 (19.1) .75 (19.1) .75 (19.1) .75 (19.1) .75 (19.1) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) C DIA .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) TABLE II F MAX G (NOTE 2) MAX 1.16 (29.5) .624 (15.8) 1.34 (34.0) .654 (16.6) 1.46 (37.1) .688 (17.5) 1.65 (41.9) .705 (17.9) 1.84 (46.7) .732 (18.6) 2.02 (51.3) .773 (19.6) 2.34 (59.4) .823 (20.9) 2.72 (69.0) 1.041 (26.4) 2.96 (75.2) 1.062 (27.0) 3.22 (81.8) 1.092 (27.7) 3.86 (98.0) 1.190 (30.2) 4.38 (111.3) 1.250 (31.8) Series 75 Metal-Core Conduit 712-387 Straight, 45° & 90° Environmental User-Installable Fitting for Series 75 Flexible Metal-Core Conduit NOTES: 1. Metric dimensions (mm), are in parentheses. 2. F dimension is based on type A construction. Add .125 (3.2) to listed dimensions for each additional shield types B through D. H MAX 1.700 (43.2) 1.730 (43.9) 1.750 (44.5) 1.780 (45.2) 1.800 (45.7) 2.020 (51.3) 2.090 (53.1) 2.360 (59.9) 2.410 (61.2) 2.450 (62.2) 2.550 (64.8) 2.610 (66.3) J MAX .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.080 (27.4) 1.200 (30.5) 1.480 (37.6) 1.550 (39.4) 1.610 (40.9) 1.860 (47.2) 1.990 (50.5) K MAX 1.810 (46.0) 1.870 (47.5) 1.930 (49.0) 2.000 (50.8) 2.060 (52.3) 2.390 (60.7) 2.540 (64.5) 2.870 (72.9) 2.960 (75.2) 3.070 (78.0) 3.320 (84.3) 3.450 (87.6) TABLE III SYMBOL MATERIAL FINISH Aluminum Alloy, 6061-T6 per QQ-A-225/8 Brass, ASTM B16 per QQ-B-626 Cadmium, Olive Drab, per QQ-P-416, over Electroless Nickel per ASTMB733-90, and MIL-C-26074, 500 Hour Salt Spray C Corrosion Resistant Steel per QQ-S-763, 300 Series Passivate per QQ-P-35 M Aluminum Alloy, 6061-T6 per QQ-A-225/8 Electroless Nickel per ASTMB733-90 and MIL-C-26074 NC Aluminum Alloy, 6061-T6 per QQ-A-225/8 Zinc Cobalt, Olive Drab Carbon Steel, B1113, per QQ-S-637 Cadmium, Olive Drab per QQ-P-416, over Electroless Nickel per ASTM B733-90 and MIL-C-26074, 500 Hour Salt Spray A B S © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-15