C&K 7000 Series
Miniature Toggle Switches
Features/Benefits
Models Available
Multi-pole and multi-position
Wide variety of actuator and
termination options
Epoxy sealed terminals prevent
contamination during soldering
A
Toggle
Typical Applications
Telecommunications
Instrumentation
Medical equipment
Build-A-Switch
Our easy Build-A-Switch concept allows you to mix and match options to create the switch you need. Below is a complete
listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box.
Switches with standard options are shown on pages A-4 and A-5. Available options are shown and described on pages A-6
thru A-18. For additional options not shown in catalog, consult our Customer Service Center.
Typical Example:
Switch Function
7101 *5+*"5*
7103 *5##5*
7201 *5+*"5*
7203 *5##5*
7211 *5*5*
7301 *5+*"5*
7401 *5+*"5*
7105 -+9%%9-+
7107 ,9%%9-+
7108 ,9-,$9-+
7109 -,$9,9-+
7205 -+9%%9-+
7207 ,9%%9-+
7208 ,9-,$9-+
7209 -,$9,9-+
7213 ,9,9-+
7215 -+9,9-+
7303 ,9%%9,
7305 -+9%%9-+
7307 ,9%%9-+
7308 ,9-,$9-+
7309 -,$9,9-+
7403 ,9%%9,
7405 -+9%%9-+
7407 ,9%%9-+
7408 ,9-,$9-+
7409 -,$9,9-+
7411 ,9,9,
7413 ,9,9-+
7415 -+9,9-+
Note: UL/CSA models
available, see page A-6.
ITT Industries
7
1 0
1
S
Y
Z
Q
E
Bushing
Contact Material
Actuator
D %&$% '"424
B +(!
M %&$%
H %&$% #(/
Q &(1"- Seal
E ,+34
P3 (//"! */&5-+//&+*
Y %&$% '"424
K -*#
I .-67 .-22$#
%&$%
NONE - !31'(,&
M (*4$0
S %&$%
"'-("$ 0$/3(0$#
G -*# -4$0 1(*4$0 ! 1$
T %&$% 0.%&*$ CW .* 1'.0--%
L -*# -4$0 1(*4$0
K2 -")(,& *$4$0 '(&'
D8 '(&' %* 2
Actuator Color/Finish
K9 -")(,& *$4$0 '(&'
D9 '(&' )$75 7
NONE &*&.%
K12 -")(,& *$4$0 '(&'
H3 '(&' )$75 7
0 /0/+- #&*&.%
K19 -")(,& *$4$0 '(&'
H4 ++ '(&' )$75 7
2&/% ( ' 0.%&*$
L '(&'
Y1 '(&' )$75 7
1 '(2$
Bushing Finish
L1 '(&'
Y3 ++ '(&' )$75 7
2 * ")
NONE & '"( +* (( 0.%&*$.
L1P ,2(90-2 2(-, '(&'
Y4 '(&' %* 2
3 $#
"3 ",/ ./&* %-+)"
L2 '(&'
Y9 '(&' )$75 7
7 *3$
2 * ")
L2P ,2(90-2 2(-, '(&'
Terminations
S 2(, "'0-+$
L3 * 12(" '(&'
A
&$%/ *$(" /%-05%+("
L3P * 12(" ,2(90-2 2(-,
AV2 "-/ -&$%/ *$(" /%-05%+(" KXX Actuator Color/Finish
NONE /0-( (0)&*0)
'(&'
C
%-05%+("
0 /0-( (0)&*0)
L40 $4$0 ' ,#*$ 5(2'-32 " .
V3 %&$% 5- '"/
2&/% ( ' 0.%&*$
L41 $4$0 ' ,#*$ 5(2' " .
Z
+(!"- (0$
2
* ") ,-#(8$# *3+(,3+
L42 $4$0 ' ,#*$ 5(2' " .
A2 (&'2 ,&*$ 2'039'-*$
3 $# ,-#(8$# *3+(,3+
LP ,2(90-2 2(-, '(&'
A3 (&'2 ,&*$ 2'039'-*$
7 *3$ ,-#(8$# *3+(,3+
MP ,2(90-2 2(-, '(&'
A4 (&'2 ,&*$ 2'039'-*$
P1 * 22$# ,2(90-2 2(-,
'(&'
P4 * 22$# ,2(90-2 2(-,
'(&'
SP ,2(90-2 2(-, '(&'
T1 '(&' !31'(,&
T1P ,2(90-2 2(-, '(&'
!31'(,&
T2P * 22$# ,2(90-2 2(-,
'(&' !31'(,&
TP ,2(90-2 2(-, '(&'
!31'(,&
A7
AV3
AW
AW1
AW3
AW4
R
R2
V2
V4
V6
V7
V8
V9
(&'2 ,&*$ 2'039'-*$
$02 0(&'2 ,&*$ 2'039'-*$
(&'2 ,&*$ $62$,#$# 2'039'-*$
(&'2 ,&*$ $62$,#$# 2'039'-*$
(&'2 ,&*$ $62$,#$# 2'039'-*$
(&'2 ,&*$ $62$,#$# 2'039'-*$
(&'2 ,&*$ 5(2' (&'2 ,&*$ 5(2' '(&' 9!0 ")$2
'(&' 9!0 ")$2
'(&' 9!0 ")$2
'(&' 9!0 ")$2
'(&' 9!0 ")$2
'(&' 9!0 ")$2
V21
V31
V41
V61
V71
V81
V91
W
W1
W3
W4
W5
Z3
'(&' 1, .9(, 9!0 ")$2
'(&' 1, .9(, 9!0 ")$2
'(&' 1, .9(, 9!0 ")$2
'(&' 1, .9(, 9!0 ")$2
'(&' 1, .9(, 9!0 ")$2
'(&' 1, .9(, 9!0 ")$2
'(&' 1, .9(, 9!0 ")$2
*-,& 5(0$ 50 .
*-,& 5(0$ 50 .
*-,& 5(0$ 50 .
*-,& 5(0$ 50 .
*-,& 5(0$ 50 .
3(") "-,,$"2
Cannon
A-3
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
Toggle
A
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page A-18 for additional ratings.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
CONTACT RESISTANCE: Below 10 milliohms typ. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 ohms min.
DIELECTRIC STRENGTH: 1000 V RMS min. @ sea level.
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate over
nickel plate. Q contact material: Coin silver, silver plated. See page
A-18 for additional contact materials.
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page A-18 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
OPERATING TEMPERATURE: –30C to 85C.
SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E
method 9 (1 hour steam aging).
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
SWITCHES WITH STANDARD OPTIONS
1/4-40 UNS-2A
PART NUMBER
KEYWAY
Terminal Nos.
For Reference Only
7101SYZQE
7101SYZBE
7101SYZGE
7101SYZQE
7103SYZQE
7105SYZQE
7107SYZQE
7108SYZQE
POS. 2
POS. 3
ON
ÑÑÑ
ÑÑÑ
NONE
ON
ON
NONE
ON
ON
NONE
ON
ON
OFF
ON
MOM.
OFF
MOM.
ON
OFF
MOM.
ON
NONE
MOM.
POS. 1
NO.
POLES
SPDT
MOM. = Momentary
SPDT
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page A-9.
For PC mounting information, see page A-10.
POS. 2
POS. 3
ON
ÑÑÑ
ÑÑÑ
NONE
ON
ON
OFF
ON
MOM.
OFF
MOM.
ON
OFF
MOM.
ON
NONE
MOM.
ON
ON
ON
POS. 1
1/4-40 UNS-2A
PART NUMBER
NO.
POLES
KEYWAY
7201SYZQE
7203SYZQE
7205SYZQE
7207SYZQE
7208SYZQE
7211SYZQE
7201SYZQE
Terminal Nos.
For Reference Only
DPDT
DPDT
MOM. = Momentary
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page A-9.
For PC mounting information, see page A-10.
1/4-40 UNS-2A
KEYWAY
PART NUMBER
7301SYZQE
7303SYZQE
POS. 2
POS. 3
ON
NONE
ON
OFF
ON
NO.
POLES
3PDT
ON
ÑÑÑ
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page A-9.
For PC mounting information, see page A-10.
7301SYZQE
Terminal Nos.
For Reference Only
3PDT
ITT Industries
POS. 1
Cannon
A-4
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
SWITCHES WITH STANDARD OPTIONS
PART NUMBER
NO.
POLES
7401SYZQE
7403SYZQE
7411SYZQE
4PDT
POS. 2
ON
ON
ON
1/4-40 UNS-2A
A
POS. 3
KEYWAY
NONE
ON
OFF
ON
ON
ON
Toggle
ÑÑ
ÑÑ
POS. 1
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page A-9.
For PC mounting information, see page A-10.
7401SYZQE
Terminal Nos.
For Reference Only
PART NUMBER
NO.
POLES
7201MD9AQE
DPDT
ÑÑÑ
ÑÑÑ
POS. 1
POS. 2
POS. 3
ON
NONE
ON
NOTE: For PC mounting information, see page A-11.
PART NUMBER
NO.
POLES
7301MD9ABE
3PDT
4PDT
Terminals &
Support
SECTION A-A
7201MD9ABE
Horizontal Actuation
Terminal Nos.
For Reference Only
DPDT
ÑÑÑ
ÑÑÑ
POS. 1
POS. 2
POS. 3
ON
NONE
ON
NOTE: For PC mounting information, see page A-11.
Terminals &
Support
SECTION A-A
Terminal Nos.
For Reference Only
POS. 1
PART NUMBER
NO.
POLES
7201MD9AV2BE
2PDT
ON
ÑÑ
POS. 2
POS. 3
NONE
ON
7301MD9ABE
Horizontal Actuation
3PDT
7201MD9AV2BE
NOTE: For PC mounting information, see page A-13.
Vertical Actuation
SECTION A-A
DPDT
Terminal Nos.
For Reference Only
ITT Industries
Cannon
A-5
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
SWITCH FUNCTION
Toggle
A
SWITCH FUNCTION
ÑÑÑ
ÑÑÑ
POS. 1
NO.
POLES
SP
DP
3P
4P
MODEL NO.
UL/CSA**
MODEL
NO.
POS. 2
POS. 3
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
SCHEMATIC
7101 (STD.)
U11
ON
NONE
ON
7103 (STD.)
U13
ON
OFF
ON
7105
U15
MOM.
OFF
MOM.
7107
U17
ON
OFF
MOM.
7108
U18
ON
NONE
MOM.
7109
U19
NONE
ON
MOM.
7201 (STD.)
U21
ON
NONE
ON
7203 (STD.)
U23
ON
OFF
ON
7205
U25
MOM.
OFF
MOM.
7207
U27
ON
OFF
MOM.
7208
U28
ON
NONE
MOM.
7209
U29
NONE
ON
MOM.
7211 (STD.)*
U211*
ON
ON
ON
7213*
U213*
ON
ON
MOM.
7215*
U215*
MOM.
ON
MOM.
7301 (STD.)
U31
ON
NONE
ON
7303
U33
ON
OFF
ON
7305
U35
MOM.
OFF
MOM.
7307
U37
ON
OFF
MOM.
7308
U38
ON
NONE
MOM.
7309
U39
NONE
ON
MOM.
7401 (STD.)
U41
ON
NONE
ON
7403
U43
ON
OFF
ON
7405
U45
MOM.
OFF
MOM.
7407
U47
ON
OFF
MOM.
7408
U48
ON
NONE
MOM.
7409
U49
NONE
ON
MOM.
7411*
U411*
ON
ON
ON
7413*
U413*
ON
ON
MOM.
7415*
U415*
MOM.
ON
MOM.
2-3
2
3
OPEN
2-1
2
1
N/A
2-3
2-1
2-3,5-6
2
3,5 6
OPEN
2-1,5-4
2
1,5 4
N/A
2-3,5-6
2-1,5-4
2-3,5-6
2
3,5 6
2-3,5-4
2
3,5 4
2-1,5-4
2
1,5 4
SPDT
DPDT
2-3,5-6,8-9
2
3,5 6,8 9
OPEN
2-1,5-4,8-7
2
1,5 4,8 7
N/A
2-3,5-6,8-9
2-1,5-4,8-7
2-3,5-6,8-9,11-12
2
3,5 6,8 9,11 12
OPEN
2-1,5-4,8-7,11-10
N/A
2-3,5-6,8-9,11-12
2-1,5-4,8-7,11-10
2-3,5-6,8-9,11-12
2
3,5 6,8 9,11 12
2-3,5-4,8-9,11-10
2
3,5 4,8 9,11 10
2-1,5-4,8-7,11-10
2
1,5 4,8 7,11 10
3PDT
4PDT
MOM. = Momentary
* Wiring for 3-way switch, see page L-29.
ITT Industries
**U11-U415 model nos.
with all options when ordered with G, L, M or Q contact material.
Cannon
A-6
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
ACTUATOR FINISH
ACTUATOR
ACTUATOR
S (STD.) .410 HIGH 1
SP ANTIROTATION, .420 HIGH 2, 3
M (STD.) .200 HIGH 1
MP ANTIROTATION, .200 HIGH 2, 3
*DIM. “A”
*
S actuator standard when ordered with
C, W-W5, Z & Z3 terminations.
.840, .640, .550 HIGH 2, 3
OPTION
CODE
DIM. “A”
L, LP
.840 (21,34)
L1, L1P
.640 (16,26)
L2, L2P
.550 (13,97)
M actuator standard when ordered with
all terminations except C, W-W5, Z & Z3.
NOTE: Caps are available separately, see page L-10.
P1
FLATTED WITH ANTIROTATION, .840 HIGH 2, 3
P3
(STD.) FLATTED WITH ANTIROTATION,
.450 HIGH 2, 3
P4
FLATTED WITH ANTIROTATION, .250 HIGH 2, 3
*
*
*
Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.)
T (STD.) .687 HIGH 1, 2
HIGH,
TP ANTIROTATION,1,.687
2, 3
15/32 BUSHING
T1 .460 HIGH 1, 2
HIGH,
T1P ANTIROTATION,1,.460
2, 3
T2P
FLATTED, ANTIROTATION, .610 HIGH,
15/32 BUSHING 1, 2, 3
15/32 BUSHING
15/32-32 UNS-2A
15/32-32 UNS-2A
15/32-32 UNS-2A
Bushing option code not required unless CW splashproof bushing ordered. TP & T1P
actuators not available with CW splashproof bushing. All TXX actuators not available on
single pole models with A-A7, AW-AW4, R & R2 terminations.
Bushing option code not required. T2P actuator not available
with CW splashproof bushing or single pole models with
A-A7, AW-AW4, R & R2 terminations.
1
L, L1, L2, M, S & TXX actuators not available
with Y1 bushing.
2
LP, L1P, L2P, MP, P1, P3, P4, SP & TXX actuators
not available with D8 & H4 bushing.
3
Antirotation: Provides anti-‘push-in’ feature on
actuator.
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
ITT Industries
OPTION
CODE
ACTUATOR FINISH
NONE
(STD.) BRIGHT CHROME-With Nickel Plated Bushing
2
(STD.) BLACK
0
BRIGHT CHROME-With Black Bushing
S
SATIN CHROME
NOTE: Black hardware is supplied when
either black actuators or bushings are
specified. All hardware is available separately,
see section L.
Cannon
A-7
www.ittcannon.com
A
Toggle
*
L, L1, L2 .840, .640, .550 HIGH 1
LP, L1P, L2P ANTIROTATION,
C&K 7000 Series
Miniature Toggle Switches
ACTUATOR FINISH/COLOR
ACTUATOR
ACTUATOR
LOCKING LEVER, .704 HIGH
(threaded)
K12
LOCKING LEVER, .732 HIGH
(threaded)
K9
LOCKING LEVER, .704 HIGH
(unthreaded)
K19
LOCKING LEVER, .732 HIGH
(unthreaded)
Toggle
A
K2
Replaces K, K8
OPTION
CODE
ACTUATOR CAP FINISH
NONE
(STD.) NATURAL ALUMINUM—With Nickel Plated Bushing
0
(STD.) NATURAL ALUMINUM—With Black Bushing
2
BLACK ANODIZED ALUMINUM
3
RED ANODIZED ALUMINUM
7
BLUE ANODIZED ALUMINUM
Replaces K1, K18
Locking Positions
NOTE: To prevent accidental actuation, toggle must be lifted
before being actuated. When released, toggle will lock in place.
Overtightening mounting nut may cause actuator to bind.
–01 Models
2 Position lock
L40
–03 & –11 Models
3 Position lock
–05, –09 & –15 Models
1 Position lock
LEVER HANDLE WITHOUT CAP
–07 & –13 Models
2 Position lock
L41
L42
PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4810
No color choice required.
L3
L3P
Bushing option code not required unless CW splashproof
bushing ordered.
–08 Models
1 Position lock
PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4811
Finish: Matte (L41 & L42 ).
PLASTIC, .840 HIGH
ANTIROTATION, .840 HIGH
Gloss Plastic
*
OPTION
CODE
PLASTIC ACTUATOR
COLORS
NONE
(STD.) No Actuator Color (L40 option)
2
(STD.) BLACK
1
WHITE
3
RED
Chrome Finish
NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability,
order L40 actuator option and lever handles separately, see section L. L4X actuators not available
with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator.
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
ITT Industries
Cannon
A-8
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
BUSHING FINISH
BUSHING
BUSHING
Y
(STD.) .350 HIGH,
THREADED, KEYWAY
Y9
NONE
NO BUSHING
.350 HIGH,
UNTHREADED,
KEYWAY
D
(STD.) .280 HIGH,
THREADED, KEYWAY
H
D8
D9
.280 HIGH, UNTHREADED,
FLAT 3
H3
(STD.) .296 HIGH, FLAT,
THREADED, HIGH TORQUE 1, 2
.315 HIGH, KEYWAY,
THREADED, HIGH
TORQUE 1, 2
A
Toggle
.280 HIGH, UNTHREADED,
KEYWAY
No bushing choice required
with KXX, TXX actuators.
(exception: Specify CW if
splashproof bushing desired).
D8
D, D9
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
D9 bushing standard with all terminations
except C, W-W5, Z or Z3. Add .070 (1,78) to
all actuators lengths with D, D8 & D9 bushings.
Y bushing standard with C,
W-W5, Z or Z3 terminations.
H4
8mm HIGH, KEYWAY, THREADED,
METRIC HIGH TORQUE 1, 2, 3
Y1
.378 HIGH, KEYWAY, THREADED,
HIGH TORQUE 1, 2, 4
Y3
Subtract .020 (0,51) from all actuator
lengths for H3 bushing.
Y4
8.9mm HIGH, KEYWAY,
THREADED, METRIC
1/4-40 UNS-2A
1/4-40 UNS-2A
CW
.378 HIGH, FLAT, THREADED,
HIGH TORQUE 1, 2, 5
THREADED, SPLASHPROOF 1, 2
For T & T1 actuators.
For actuators other than T & T1.
OPTION
CODE
BUSHING FINISH
NONE
(STD.) NICKEL on all bushings
except ‘D8’ satin chrome.
2
1
15/32-32 UNS-2A
Will withstand 12 in.-lbs. of torque with no distortion.
2
1/4-40 UNS-2A
CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models
with A4, R or R2 terminations.
3
IP67 Degree of protection, totally protected against
dust, full-scale voltage protection, temporary immersion.
Internal actuator seal standard. External bushing seal
washer available from: Multi-Flex Seals, Inc.,
Hackensack, NJ. Part number: MFS-60064.
BLACK
D8 & H4 bushings available only with L, L1, L2, L3, M & S actuators.
4
Y1 bushing available only with LP, LXP, MP, PX & SP actuators.
5
Y4 bushing not available with L4X actuators.
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with
threaded bushings. Black hardware is supplied when either black bushings or
actuators are specified. Optional mounting nut and locking ring styles and finishes
available, see section L.
IP67 Degree of protection, totally protected
against dust, full-scale voltage protection,
temporary immersion. Internal actuator seal
and external bushing seal washer standard.
PANEL MOUNTING
1/4 INCH BUSHING
Without locking ring.
ITT Industries
METRIC BUSHING
With standard locking ring. With small locking ring.
Without locking ring.
With locking ring.
15/32 INCH BUSHING
Without locking ring.
With standard locking ring.
Cannon
A-9
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
TERMINATIONS
Z
C
(STD.) SOLDER LUG
(STD.) PC THRU-HOLE
A
Toggle
PC MOUNTING
.030 (0,76) Thk.
SPDT thru 4PDT
Z3
Not available with K, L or M contact materials.
SPDT thru 4PDT
W, W1, W3, W4, W5
QUICK CONNECT
Dim ‘A’
.030 (0,76) Thk.
WIRE WRAP
OPTION
CODE
DIM ‘A’
W
.750 (19,05)
W1
.964 (24,48)
W3
.425 (10,80)
W4
1.062 (26,97)
W5
1.305 (33,15)
.030 (0,76) Thk.
SPDT thru 4PDT
A
Not available with K, L or M contact materials.
Mating quick connector available, order part
number 530100000.
SPDT thru 4PDT
(STD.) RIGHT ANGLE, PC THRU-HOLE
7101MD9ABE
Horizontal Actuation
Actuator Shown
In Pos. 1
SECTION A-A
Terminal Nos.
For Reference Only
SPDT
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
Part No. Shown: 7101MHABE
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
AW, AW1, AW3, AW4
Dim ‘A’
RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
OPTION
CODE
DIM ‘A’
AW
.50 (12,7)
AW1
.72 (18,3)
AW3
.20 (5,1)
AW4
.83 (21,1)
PC MOUNTING
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
ITT Industries
Cannon
A-10
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
TERMINATIONS
A
(STD.) RIGHT ANGLE, PC THRU-HOLE
A
Toggle
Actuator Shown
In Pos. 1
Terminals &
Support
SECTION A-A
7201MD9ABE
Horizontal Actuation
DPDT
A3
AW, AW1, AW4
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
PC MOUNTING
DIM ‘A’
OPTION
CODE
DIM ‘A’
AW
.19 (4,8)
AW1
.40 (10,2)
AW4
.50 (12,7)
.33 (8,4)
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
A
(STD.) RIGHT ANGLE, PC THRU-HOLE
Actuator Shown
In Pos. 1
Terminals &
Support
SECTION A-A
7301MD9ABE
Horizontal Actuation
3PDT
AW4
RIGHT ANGLE, EXTENDED, PC THRU-HOLE
PC MOUNTING
.18
(4,6)
.33 TYP.
(8,4)
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
ITT Industries
Cannon
A-11
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
TERMINATIONS
A2
RIGHT ANGLE, PC THRU-HOLE,
.156 PITCH
PC MOUNTING
Toggle
A
7101MHA2BE
Horizontal Actuation
Terminals & Support
Actuator Shown In Pos. 1
SPDT
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
Part No. Shown: 7101MHA2BE
Not available with TXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
A4
RIGHT ANGLE, PC THRU-HOLE,
.156 PITCH
7101MD9A4BE
Horizontal Actuation
PC MOUNTING
Actuator Shown In Pos. 1
SPDT
NOTE: Termination options A4 & R2 are functionally identical and fit the same PC mounting
pattern. The switches, however, are shifted relative to the mounting holes. Unlike the R2, the
A4 option is available with any contact material and can be UL recognized and CSA certified.
The PC pattern must clear switch support legs.
Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings,
and I seal. Terminal bend radii and lead-in manufacturing option.
AV2
(STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150 PITCH
7101MD9AV2BE
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
SPDT
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150 PITCH
PC MOUNTING
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
ITT Industries
Cannon
A-12
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
TERMINATIONS
AV2
(STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150 PITCH
A
Toggle
7201MD9AV2BE
Vertical Actuation
SECTION A-A
Actuator Shown In Pos. 1
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150 PITCH
DPDT
PC MOUNTING
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
AV2
(STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150 PITCH
Actuator Shown In Pos. 1
SECTION A-A
7301MD9AV2BE
Vertical Actuation
3PDT
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, .150 PITCH
PC MOUNTING
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
ITT Industries
Cannon
A-13
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
TERMINATIONS
AV2
(STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150 PITCH
Toggle
A
7401MD9AV2BE
Vertical Actuation
Actuator Shown In Pos. 1
4PDT
AV3
SECTION A-A
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150 PITCH
PC MOUNTING
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
R
RIGHT ANGLE WITH PCB
PC MOUNTING
Terminals
& Support
7101MD9RBE
Horizontal Actuation
SPDT
Actuator Shown In Pos. 1
Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings.
Contact makes on same side actuator thrown.
R2
RIGHT ANGLE WITH PCB
PC MOUNTING
Terminals
& Support
7101MD9R2BE
Horizontal Actuation
SPDT
Actuator Shown In Pos. 1
Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings.
Contact makes on opposite side actuator thrown.
ITT Industries
Cannon
A-14
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
TERMINATIONS
A7
RIGHT ANGLE, PC THRU-HOLE,
.025 SQUARE, .200 PITCH
A
PC MOUNTING
Toggle
Terminals & Support
7101MD9A7BE
Horizontal Actuation
SECTION A-A
Actuator Shown In Pos. 1
SPDT
Not available with KXX & TXX actuators, H, H3, H4, Y1 & Y4 bushings. I seal option.
Terminal bend radii and lead-in manufacturing option. Available with B contact material only.
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V61, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
7101MD9__BE
Dim ‘A’
SPDT
Snap-In
Actuator Shown In Pos. 1
OPTION
CODE
DIM ‘A’
V2, V21
.555 (14,10)
V6, V61
.460 (11, 68)
V7, V71
.630 (16, 00)
V8, V81
.953 (24, 21)
Not available with I seal option.
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V61, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
7201MD9__BE
DPDT
OPTION
CODE
Snap-In
Actuator Shown In Pos. 1
DIM ‘A’
V2, V21
.555 (14,10)
V6, V61
.460 (11, 68)
V7, V71
.630 (16, 00)
V8, V81
.953 (24, 21)
Not available with I seal option.
ITT Industries
Cannon
A-15
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
TERMINATIONS
PC MOUNTING
Toggle
A
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Dim ‘A’
OPTION
CODE
Snap-In
DIM ‘A’
7301MD9__BE
V2, V21
.555 (14,10)
3PDT
V7, V71
.630 (16, 00)
V8, V81
.953 (24, 21)
Actuator Shown In Pos. 1
Not available with I seal option.
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
Snap-In
OPTION
CODE
7401MD9__BE
4PDT
Actuator Shown In Pos. 1
DIM ‘A’
V2, V21
.555 (14,10)
V7, V71
.630 (16, 00)
V8, V81
.953 (24, 21)
Not available with I seal option.
V3 (STD.) , V4, V9 VERTICAL MOUNT, V-BRACKET
V31, V41, V91 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
Snap-In
OPTION
CODE
DIM ‘A’
7101MD9__BE
V3, V31
SPDT
Actuator Shown In Pos. 1
.460 (11,68)
V4, V41
.630 (16,00)
V9, V91
1.150 (29,21)
Not available with I seal option.
ITT Industries
Cannon
A-16
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
TERMINATIONS
V3 (STD.) , V4, V9 VERTICAL MOUNT, V-BRACKET
V31, V41, V91 VERTICAL MOUNT, V-BRACKET, SNAP-IN
A
Toggle
PC MOUNTING
Dim ‘A’
7201MD9__BE
DPDT
Snap-In
OPTION
CODE
Actuator Shown In Pos. 1
DIM ‘A’
V3, V31
.460 (11,68)
V4, V41
.630 (16,00)
V9, V91
1.150 (29,21)
Not available with I seal option.
V4, V9 VERTICAL MOUNT, V-BRACKET
V41, V91 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
7301MD9__BE
3PDT
Snap-In
OPTION
CODE
Actuator Shown In Pos. 1
DIM ‘A’
V4, V41
.630 (16,00)
V9, V91
1.150 (29,21)
Not available with I seal option.
V4, V9 VERTICAL MOUNT, V-BRACKET
V41, V91 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
7401MD9__BE
4PDT
Snap-In
OPTION
CODE
Actuator Shown In Pos. 1
DIM ‘A’
V4 V41
.630 (16,00)
V9, V91
1.150 (29,21)
Not available with I seal option.
ITT Industries
Cannon
A-17
www.ittcannon.com
C&K 7000 Series
Miniature Toggle Switches
CONTACT MATERIAL
OPTION
CODE
A
CONTACT
MATERIAL
Toggle
B (STD.)
TERMINAL
PLATING
GOLD
GOLD 1
K
RATINGS
1
LOW LEVEL/DRY CIRCUIT
TIN-LEAD 6
SILVER 5
Q (STD.)
45
SILVER 4,5
POWER
5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
TIN-LEAD 6
M
G
0.4 VA MAX. @ 20 V AC OR DC MAX.
GOLD OVER SILVER 2,3
L
GOLD 3
LOW LEVEL/DRY CIRCUIT OR POWER
TIN-LEAD 6
0.4
0
4 VA MAX.
MAX @ 20 V AC OR DC MAX.
MAX OR 5 AMPS @ 120 V AC OR
28 V DC; 2 AMPS @ 250 V AC.
CONTACT MATERIAL/APPLICATION RECOMMENDATIONS–SEE CHART, PAGE L-31.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
B contact material standard with all terminations, except C, Z & Z3.
4
END CONTACTS: Coin silver, silver plated.
B contact material must be ordered with A7, AW6-AW7, R, R2, W6-W7 terminations.
5
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
Q contact material standard with C, Z & Z3 terminations.
6
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
K, L & M contact materials not available with Z & Z3 terminations.
U11-U415 model numbers
M or Q contact material.
with all options when ordered with G, L,
SEAL
E
I
(STD.) EPOXY SEAL
EPOXY POTTED BASE
Dim. ‘A’
Compatible with “bottom-wash” PC board cleaning methods.
ITT Industries
NO.
POLES
DIM ‘A’
SP
.410 (10,41)
DP
.440 (11,18)
3P
.505 (12,83)
4P
.505 (12,83)
Available with C, W-W5, Z & Z3 terminations only.
Cannon
A-18
www.ittcannon.com