54AC11034, 74AC11034 HEX NONINVERTERS SCAS034A – FEBRUARY 1988 – REVISED APRIL 1993 • • • • • 54AC11034 . . . J PACKAGE 74AC11034 . . . DW OR N PACKAGE (TOP VIEW) Flow-Through Architecture Optimizes PCB Layout Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS) 1-µm Process 500-mA Typical Latch-Up Immunity at 125°C Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs 1Y 2Y 3Y GND GND GND GND 4Y 5Y 6Y 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 1A 2A 3A NC VCC VCC NC 4A 5A 6A description These devices contain six independent noninverters. They perform the Boolean function Y = A. 3A NC VCC VCC NC 54AC11034 . . . FK PACKAGE (TOP VIEW) The 54AC11034 is characterized for operation over the full military temperature range of – 55°C to 125°C. The 74AC11034 is characterized for operation from – 40°C to 85°C. 2A 1A 1Y 2Y 3Y INPUT A OUTPUT Y H H L L 2A 20 19 17 6 16 7 15 8 14 9 10 11 12 13 4A 5A 6A 6Y 5Y logic diagram (positive logic) 1 1 2 1Y 1A 20 1 19 2 18 3 13 8 12 9 11 10 2Y 18 3 4A 13 8 4Y 5A 12 9 5Y 6A 11 10 6Y 3A 5 NC – No internal connection logic symbol† 1A 3 2 1 20 19 18 GND GND GND GND 4Y FUNCTION TABLE (each inverter) 4 3Y † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the DW, J, and N packages. 2A 3A 4A 5A 6A 1Y 2Y 3Y 4Y 5Y 6Y EPIC is a trademark of Texas Instruments Incorporated. Copyright 1993, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–1 54AC11034, 74AC11034 HEX NONINVERTERS SCAS034A – FEBRUARY 1988 – REVISED APRIL 1993 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC + 0.5 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 100 mA Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. recommended operating conditions 54AC11034 VCC Supply voltage VIH High-level input voltage VCC = 3 V VCC = 4.5 V VCC = 5.5 V VCC = 3 V NOM MAX MIN NOM MAX 3 5 5.5 3 5 5.5 2.1 2.1 3.15 3.15 3.85 3.85 VIL Low-level input voltage VI VO Input voltage 0 Output voltage 0 IOH High-level output current IOL Low-level output current ∆t /∆v Input transition rise or fall rate TA Operating free-air temperature 2–2 74AC11034 MIN VCC = 4.5 V VCC = 5.5 V 0.9 0.9 1.35 1.65 VCC = 3 V VCC = 4.5 V V 1.65 0 0 VCC VCC –4 –4 – 24 – 24 VCC = 5.5 V VCC = 3 V – 24 – 24 12 12 VCC = 4.5 V VCC = 5.5 V 24 24 POST OFFICE BOX 655303 V V 1.35 VCC VCC UNIT 24 V V mA mA 24 0 10 0 10 ns/ V – 55 125 – 40 85 °C • DALLAS, TEXAS 75265 54AC11034, 74AC11034 HEX NONINVERTERS SCAS034A – FEBRUARY 1988 – REVISED APRIL 1993 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC IOH = – 50 µA IOH = – 24 mA A IOH = – 50 mA† IOH = – 75 mA† MIN MAX MIN 2.9 4.5 V 4.4 4.4 4.4 5.5 V 5.4 5.4 5.4 3V 2.58 2.4 2.48 4.5 V 3.94 3.7 3.8 5.5 V 4.94 4.7 4.8 MAX V 3.85 3V 0.1 0.1 0.1 4.5 V 0.1 0.1 0.1 5.5 V 0.1 0.1 0.1 3V 0.36 0.5 0.44 4.5 V 0.36 0.5 0.44 5.5 V 0.36 0.5 0.44 IOL = 50 mA† IOL = 75 mA† 5.5 V VI = VCC or GND VI = VCC or GND, 5.5 V UNIT 3.85 5.5 V IOL = 24 mA 74AC11034 2.9 IOL = 12 mA II ICC 54AC11034 2.9 5.5 V IOL = 50 µA VOL TA = 25°C TYP MAX 3V IOH = – 4 mA VOH MIN V 1.65 5.5 V 1.65 ± 0.1 IO = 0 5.5 V 4 VI = VCC or GND 5V 3.5 † Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms. ±1 ±1 µA 80 40 µA Ci pF switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A Y TA = 25°C MIN TYP MAX 54AC11034 74AC11034 MIN MAX MIN MAX 1.5 5.7 9.1 1.5 10.7 1.5 10.1 1.5 5.5 8.3 1.5 9.9 1.5 9.2 UNIT ns switching characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A Y TA = 25°C MIN TYP MAX 54AC11034 74AC11034 MIN MAX MIN MAX 1.5 4 6.3 1.5 7.4 1.5 6.9 1.5 4 6.2 1.5 7.3 1.5 6.8 UNIT ns operating characteristics, VCC = 5 V, TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance per gate POST OFFICE BOX 655303 CL = 50 pF, • DALLAS, TEXAS 75265 f = 1 MHz TYP UNIT 27 pF 2–3 54AC11034, 74AC11034 HEX NONINVERTERS SCAS034A – FEBRUARY 1988 – REVISED APRIL 1993 PARAMETER MEASUREMENT INFORMATION Input (see Note B) From Output Under Test CL = 50 pF (see Note A) VCC 50% 50% 0V tPLH tPHL 500 Ω 50% VCC Output VOH 50% VCC VOL VOLTAGE WAVEFORMS LOAD CIRCUIT NOTES: A. CL includes probe and jig capacitance. B. Input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr = 3 ns, tf = 3 ns. C. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 2–4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated