74AHC1G07; 74AHCT1G07 Buffer with open-drain output Rev. 06 — 7 June 2007 Product data sheet 1. General description 74AHC1G07 and 74AHCT1G07 are high-speed Si-gate CMOS devices. They provide a non-inverting buffer. The output of these devices is open-drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. For digital operation this device must have a pull-up resistor to establish a logic HIGH-level. The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V. The AHCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V. 2. Features n n n n High noise immunity Low power dissipation SOT353-1 and SOT753 package options ESD protection: u HBM JESD22-A114E: exceeds 2000 V u MM JESD22-A115-A: exceeds 200 V u CDM JESD22-C101C: exceeds 1000 V n Specified from −40 °C to +125 °C 3. Ordering information Table 1. Ordering information Type number 74AHC1G07GW Package Temperature range Name Description Version −40 °C to +125 °C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1 −40 °C to +125 °C SC-74A plastic surface-mounted package; 5 leads SOT753 74AHCT1G07GW 74AHC1G07GV 74AHCT1G07GV 74AHC1G07; 74AHCT1G07 NXP Semiconductors Buffer with open-drain output 4. Marking Table 2. Marking codes Type number Marking 74AHC1G07GW AS 74AHC1G07GV A07 74AHCT1G07GW CS 74AHCT1G07GV C07 5. Functional diagram Y A 2 Y 4 2 A 4 mna589 Fig 1. Logic symbol Y A GND mna590 Fig 2. IEC logic symbol mna591 Fig 3. Logic diagram 6. Pinning information 6.1 Pinning 74AHC1G07 74AHCT1G07 n.c. 1 A 2 GND 3 5 VCC 4 Y 001aaf094 Fig 4. Pin configuration 6.2 Pin description Table 3. Pin description Symbol Pin Description n.c. 1 not connected A 2 data input GND 3 ground (0 V) Y 4 data output VCC 5 supply voltage 74AHC_AHCT1G07_6 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 06 — 7 June 2007 2 of 11 74AHC1G07; 74AHCT1G07 NXP Semiconductors Buffer with open-drain output 7. Functional description Table 4. Function table H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state Input Output A Y L L H Z 8. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VCC supply voltage VI input voltage IIK input clamping current VI < −0.5 V IOK output clamping current VO < −0.5 V IO output current VO > −0.5 V output voltage VO Conditions [1] Min Max Unit −0.5 +7.0 V −0.5 +7.0 V −20 - mA - ±20 mA - ±25 mA active mode [1] −0.5 +7.0 V high-impedance mode [1] −0.5 +7.0 V ICC supply current - 75 mA IGND ground current −75 - mA Tstg storage temperature −65 +150 °C Ptot total power dissipation - 250 mW Tamb = −40 °C to +125 °C [2] [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For both TSSOP5 and SC-74A packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K. 9. Recommended operating conditions Table 6. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC supply voltage VI input voltage VO output voltage Tamb ambient temperature ∆t/∆V input transition rise and fall rate Conditions 74AHC1G07 Unit Typ Max Min Typ Max 2.0 5.0 5.5 4.5 5.0 5.5 V 0 - 5.5 0 - 5.5 V active mode 0 - VCC 0 - VCC V high-impedance mode 0 - 6.0 0 - 6.0 V −40 +25 +125 −40 +25 +125 °C VCC = 3.3 V ± 0.3 V - - 100 - - - ns/V VCC = 5.0 V ± 0.5 V - - 20 - - 20 ns/V 74AHC_AHCT1G07_6 Product data sheet 74AHCT1G07 Min © NXP B.V. 2007. All rights reserved. Rev. 06 — 7 June 2007 3 of 11 74AHC1G07; 74AHCT1G07 NXP Semiconductors Buffer with open-drain output 10. Static characteristics Table 7. Static characteristics Voltages are referenced to GND (ground = 0 V). Symbol Parameter 25 °C Conditions −40 °C to +85 °C −40 °C to +125 °C Unit Min Typ Max Min Max Min Max VCC = 2.0 V 1.5 - - 1.5 - 1.5 - V VCC = 3.0 V 2.1 - - 2.1 - 2.1 - V VCC = 5.5 V 3.85 - - 3.85 - 3.85 - V For type 74AHC1G07 VIH VIL VOL HIGH-level input voltage LOW-level input voltage VCC = 2.0 V - - 0.5 - 0.5 - 0.5 V VCC = 3.0 V - - 0.9 - 0.9 - 0.9 V VCC = 5.5 V - - 1.65 - 1.65 - 1.65 V LOW-level VI = VIH or VIL output voltage IO = 50 µA; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V IO = 50 µA; VCC = 3.0 V - 0 0.1 - 0.1 - 0.1 V IO = 50 µA; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V IO = 4.0 mA; VCC = 3.0 V - - 0.36 - 0.44 - 0.55 V IO = 8.0 mA; VCC = 4.5 V - - 0.36 - 0.44 - 0.55 V - - 0.1 - 1.0 - 2.0 µA ±10.0 µA II input leakage current VI = 5.5 V or GND; VCC = 0 V to 5.5 V IOZ OFF-state VI = VIH or VIL; VO = VCC or output current GND; VCC = 5.5 V - - ±0.25 ICC supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V - - 1.0 - 10 - 20 µA CI input capacitance - 1.5 10 - 10 - 10 pF ±2.5 For type 74AHCT1G07 VIH HIGH-level input voltage VCC = 4.5 V to 5.5 V 2.0 - - 2.0 - 2.0 - V VIL LOW-level input voltage VCC = 4.5 V to 5.5 V - - 0.8 - 0.8 - 0.8 V VOL LOW-level VI = VIH or VIL; VCC = 4.5 V output voltage IO = 50 µA - 0 0.1 - 0.1 - 0.1 V IO = 8.0 mA - - 0.36 - 0.44 - 0.55 V - - 0.1 - 1.0 - 2.0 µA OFF-state VI = VIH or VIL; VO = VCC or output current GND; VCC = 5.5 V - - ±0.25 ±10.0 µA ICC supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V - - 1.0 - 10 - 20 µA ∆ICC additional per input pin; VI = 3.4 V; supply current other inputs at VCC or GND; IO = 0 A; VCC = 5.5 V - - 1.35 - 1.5 - 1.5 mA CI input capacitance - 1.5 10 - 10 - 10 pF II input leakage current IOZ VI = 5.5 V or GND; VCC = 0 V to 5.5 V 74AHC_AHCT1G07_6 Product data sheet ±2.5 © NXP B.V. 2007. All rights reserved. Rev. 06 — 7 June 2007 4 of 11 74AHC1G07; 74AHCT1G07 NXP Semiconductors Buffer with open-drain output 11. Dynamic characteristics Table 8. Dynamic characteristics GND = 0 V; tr = tf = ≤ 3.0 ns. For test circuit see Figure 6. Symbol Parameter 25 °C Conditions −40 °C to +85 °C −40 °C to +125 °C Unit Min Typ Max Min Max Min Max - 3.5 5.6 1.0 6.3 1.0 7.0 ns - 5.0 8.0 1.0 9.0 1.0 10.0 ns CL = 15 pF - 2.5 3.9 1.0 4.6 1.0 4.9 ns CL = 50 pF - 3.6 5.5 1.0 6.5 1.0 7.0 ns - 5.8 7.9 1.0 8.4 1.0 8.9 ns - 8.3 11.5 1.0 12.0 1.0 12.5 ns - 4.2 5.1 1.0 5.6 1.0 6.1 ns - 6.0 7.5 1.0 8.0 1.0 8.5 ns - 5 - - - - - pF CL = 15 pF - 2.8 4.6 1.0 5.3 1.0 5.6 ns CL = 50 pF - 4.0 6.5 1.0 7.5 1.0 8.0 ns - 3.9 5.6 1.0 6.1 1.0 6.6 ns - 5.5 8.0 1.0 8.5 1.0 9.0 ns - 6.5 - - - - - pF For type 74AHC1G07 tPZL OFF-state to LOW propagation delay A to Y; see Figure 5 VCC = 3.0 V to 3.6 V [1] CL = 15 pF CL = 50 pF VCC = 4.5 V to 5.5 V tPLZ LOW to OFF-state propagation delay [2] A to Y; see Figure 5 VCC = 3.0 V to 3.6 V [1] CL = 15 pF CL = 50 pF VCC = 4.5 V to 5.5 V [2] CL = 15 pF CL = 50 pF CPD power dissipation capacitance per buffer; CL = 50 pF; f = 1 MHz; VI = GND to VCC [3] For type 74AHCT1G07 tPZL tPLZ OFF-state to LOW propagation delay LOW to OFF-state propagation delay A to Y; see Figure 5 VCC = 4.5 V to 5.5 V [2] A to Y; see Figure 5 VCC = 4.5 V to 5.5 V [2] CL = 15 pF CL = 50 pF CPD power dissipation capacitance per buffer; CL = 50 pF; f = 1 MHz; VI = GND to VCC [3] [1] Typical values are measured at VCC = 3.3 V. [2] Typical values are measured at VCC = 5.0 V. [3] CPD is used to determine the dynamic power dissipation PD (µW). PD = CPD × VCC2 × fi + ∑ (CL × VCC2 × fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in Volts 74AHC_AHCT1G07_6 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 06 — 7 June 2007 5 of 11 74AHC1G07; 74AHCT1G07 NXP Semiconductors Buffer with open-drain output 12. Waveforms VI VM(1) A input GND t PZL t PLZ VCC Y output VM(2) VOL + 0.3 V VOL mna592 Measurement points are given in Table 9. Fig 5. Input (A) to output (Y) propagation delays Table 9. Measurement point Type Input Output VI VM(1) VM(2) 74AHC1G07 GND to VCC 0.5 × VCC 0.5 × VCC 74AHCT1G07 GND to 3.0 V 1.5 V 0.5 × VCC S1 VCC PULSE GENERATOR VI RL = 1000 Ω VO VCC open GND D.U.T. RT CL mna232 Test data is given in Table 8. Definitions for test circuit: CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to output impedance Zo of the pulse generator. For tPLZ, tPZL, S1 = VCC Fig 6. Load circuitry for switching times 74AHC_AHCT1G07_6 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 06 — 7 June 2007 6 of 11 74AHC1G07; 74AHCT1G07 NXP Semiconductors Buffer with open-drain output 13. Package outline TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm E D SOT353-1 A X c y HE v M A Z 5 4 A2 A (A3) A1 θ 1 Lp 3 L e w M bp detail X e1 0 1.5 3 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(1) e e1 HE L Lp v w y Z(1) θ mm 1.1 0.1 0 1.0 0.8 0.15 0.30 0.15 0.25 0.08 2.25 1.85 1.35 1.15 0.65 1.3 2.25 2.0 0.425 0.46 0.21 0.3 0.1 0.1 0.60 0.15 7° 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT353-1 REFERENCES IEC JEDEC JEITA MO-203 SC-88A EUROPEAN PROJECTION ISSUE DATE 00-09-01 03-02-19 Fig 7. Package outline SOT353-1 (TSSOP5) 74AHC_AHCT1G07_6 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 06 — 7 June 2007 7 of 11 74AHC1G07; 74AHCT1G07 NXP Semiconductors Buffer with open-drain output Plastic surface-mounted package; 5 leads SOT753 D E B y A X HE 5 v M A 4 Q A A1 c 1 2 3 Lp detail X bp e w M B 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp c D E e HE Lp Q v w y mm 1.1 0.9 0.100 0.013 0.40 0.25 0.26 0.10 3.1 2.7 1.7 1.3 0.95 3.0 2.5 0.6 0.2 0.33 0.23 0.2 0.2 0.1 OUTLINE VERSION REFERENCES IEC JEDEC SOT753 JEITA SC-74A EUROPEAN PROJECTION ISSUE DATE 02-04-16 06-03-16 Fig 8. Package outline SOT753 (SC-74A) 74AHC_AHCT1G07_6 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 06 — 7 June 2007 8 of 11 74AHC1G07; 74AHCT1G07 NXP Semiconductors Buffer with open-drain output 14. Abbreviations Table 10. Abbreviations Acronym Description CDM Charged Device Model DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 15. Revision history Table 11. Revision history Document ID Release date Data sheet status Change notice Supersedes 74AHC_AHCT1G07_6 20070607 Product data sheet - 74AHC_AHCT1G07_5 Modifications: • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. • • • Legal texts have been adapted to the new company name where appropriate. Package SOT353 changed to SOT353-1 in Section 3 and Section 13. Quick reference data and Soldering sections removed. 74AHC_AHCT1G07_5 20021002 Product specification - 74AHC_AHCT1G07_4 74AHC_AHCT1G07_4 20020606 Product specification - 74AHC_AHCT1G07_3 74AHC_AHCT1G07_3 20020221 Product specification - 74AHC_AHCT1G07_2 74AHC_AHCT1G07_2 20010209 Product specification - 74AHC_AHCT1G07_1 74AHC_AHCT1G07_1 20000502 Product specification - - 74AHC_AHCT1G07_6 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 06 — 7 June 2007 9 of 11 74AHC1G07; 74AHCT1G07 NXP Semiconductors Buffer with open-drain output 16. Legal information 16.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 16.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 16.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 16.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 17. Contact information For additional information, please visit: http://www.nxp.com For sales office addresses, send an email to: [email protected] 74AHC_AHCT1G07_6 Product data sheet © NXP B.V. 2007. All rights reserved. Rev. 06 — 7 June 2007 10 of 11 NXP Semiconductors 74AHC1G07; 74AHCT1G07 Buffer with open-drain output 18. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 16 16.1 16.2 16.3 16.4 17 18 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional description . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Recommended operating conditions. . . . . . . . 3 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4 Dynamic characteristics . . . . . . . . . . . . . . . . . . 5 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Contact information. . . . . . . . . . . . . . . . . . . . . 10 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2007. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 7 June 2007 Document identifier: 74AHC_AHCT1G07_6