Revised December 2001 74ALVC16838 Low Voltage 16-Bit Selectable Register/Buffer with 3.6V Tolerant Inputs and Outputs General Description Features The ALVC16838 contains sixteen non-inverting selectable buffered or registered paths. The device can be configured to operate in a registered, or flow through buffer mode by utilizing the register enable (REGE) and Clock (CLK) signals. The device operates in a 16-bit word wide mode. All outputs can be placed into 3-State through use of the OE Pin. These devices are ideally suited for buffered or registered 168 pin and 200 pin SDRAM DIMM memory modules. ■ Compatible with PC100 and PC133 DIMM module specifications The 74ALVC16838 is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The 74ALVC16838 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation. ■ 1.65V to 3.6V VCC supply operation ■ 3.6V tolerant inputs and outputs ■ tPD (CLK to O n) 3.5 ns max for 3.0V to 3.6V VCC 4.5 ns max for 2.3V to 2.7V VCC 8.0 ns max for 1.65V to 1.95V VCC ■ Power-off high impedance inputs and outputs ■ Supports live insertion and withdrawal (Note 1) ■ Uses patented noise/EMI reduction circuitry ■ Ideal for SDRAM DIMM modules ■ Latchup conforms to JEDEC JED78 ■ ESD performance: Human body model > 2000V Machine model > 200V Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Order Number Package Number Package Description 74ALVC16838MTD MTD48 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbol Pin Descriptions Pin Names © 2001 Fairchild Semiconductor Corporation DS500714 Description OE Output Enable Input (Active LOW) I0–I15 Inputs O0–O15 Outputs CLK Clock Input REGE Register Enable Input www.fairchildsemi.com 74ALVC16838 Low Voltage 16-Bit Selectable Register/Buffer with 3.6V Tolerant Inputs and Outputs December 2001 74ALVC16838 Connection Diagram Truth Table Inputs Outputs CLK REGE In OE On ↑ H H L H ↑ H L L L X L H L H X L L L L X X X H Z H = Logic HIGH L = Logic LOW X = Don’t Care, but not floating Z = High Impedance ↑ = LOW-to-HIGH Clock Transition Functional Description The 74ALVC16838 consists of sixteen selectable noninverting buffers or registers with word wide modes. Mode functionality is selected through operation of the CLK and REGE pin as shown by the truth table. When REGE is held at a logic HIGH the device operates as a 16-bit register. Data is transferred from In to On on the rising edge of the CLK input. When the REGE pin is held at a logic LOW the device operates in a flow through mode and data propagates directly from the I to the O outputs. All outputs can be 3-STATE by holding the OE pin at a logic HIGH. Logic Diagram www.fairchildsemi.com 2 Recommended Operating Conditions (Note 4) −0.5V to +4.6V Supply Voltage (VCC) −0.5V to 4.6V DC Input Voltage (VI) Output Voltage (VO) (Note 3) Power Supply −0.5V to VCC +0.5V Operating DC Input Diode Current (IIK) VI < 0V −50 mA 0V to VCC Output Voltage (VO) DC Output Diode Current (IOK) 0V to VCC Free Air Operating Temperature (TA) VO < 0V −50 mA −40°C to +85°C Minimum Input Edge Rate (∆t/∆V) VIN = 0.8V to 2.0V, VCC = 3.0V DC Output Source/Sink Current ±50 mA (IOH/IOL) ±100 mA Supply Pin (ICC or GND) 10 ns/V Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. DC VCC or GND Current per Storage Temperature Range (TSTG) 1.65V to 3.6V Input Voltage (VI) −65°C to +150°C Note 3: IO Absolute Maximum Rating must be observed. Note 4: Floating or unused inputs must be held HIGH or LOW. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IOH = −100 µA VCC (V) Min 1.65 -1.95 0.65 x VCC 2.3 - 2.7 1.7 2.7 - 3.6 2.0 Max V 1.65 -1.95 0.35 x VCC 2.3 - 2.7 0.7 2.7 - 3.6 0.8 1.65 - 3.6 VCC - 0.2 IOH = −4 mA 1.65 1.2 IOH = −6 mA 2.3 2 IOH = −12 mA 2.3 1.7 2.7 2.2 V V 3.0 2.4 IOH = −24 mA 3.0 2 IOL = 100 µA 1.65 - 3.6 0.2 IOL = 4 mA 1.65 0.45 IOL = 6 mA 2.3 0.4 IOL = 12mA 2.3 0.7 IOL = 24 mA Units 2.7 0.4 3 0.55 V II Input Leakage Current 0 ≤ VI ≤ 3.6V 3.6 ±5.0 µA IOZ 3-STATE Output Leakage 0 ≤ VO ≤ 3.6V 3.6 ±10 µA ICC Quiescent Supply Current VI = V CC or GND, IO = 0 3.6 40 µA ∆ICC Increase in ICC per Input VIH = VCC − 0.6V 3 -3.6 750 µA 3 www.fairchildsemi.com 74ALVC16838 Absolute Maximum Ratings(Note 2) 74ALVC16838 AC Electrical Characteristics T A = −40°C to +85°C, RL = 500Ω Symbol CL = 50 pF Parameter V CC = 3.3V ± 0.3V Min fMAX Maximum Clock Frequency tPHL, tPLH Propagation Delay Bus to Bus (REGE = 0) tPHL, tPLH Propagation Delay CLK to Bus (REGE = 1) tPHL, tPLH Propagation Delay REGE to Bus Max 250 CL = 30 pF V CC = 2.7V Min V CC = 2.5V ± 0.2V Max 200 Min V CC = 1.8V ± 0.15V Max Min 200 Units Max 100 ns 1.3 3.0 1.5 4.0 1.0 3.5 1.5 7.0 ns 1.3 3.5 1.5 4.5 1.0 4.0 1.5 8.0 ns 1.3 3.5 1.5 4.5 1.0 4.0 1.5 8.0 ns ns tPZL, tPZH Output Enable Time 1.3 4.0 1.5 5.2 1.0 4.7 1.5 9.4 tPLZ, tPHZ Output Disable Time 1.3 4.0 1.5 4.4 1.0 3.9 1.5 7.0 tW Pulse Width 1.5 1.5 1.5 4.0 ns tS Setup Time 1.0 1.0 1.0 2.5 ns tH Hold Time 0.7 0.7 0.7 1.0 ns ns Capacitance Symbol Parameter Conditions TA = +25°C VCC Typical Units CIN Input Capacitance VI = 0V or VCC 3.3 6 pF COUT Output Capacitance VI = 0V or VCC 3.3 7 pF CPD Power Dissipation Capacitance 3.3 20 2.5 20 www.fairchildsemi.com Outputs Enabled f = 10 MHz, CL = 50 pF 4 pF TABLE 1. Values for Figure 1 TEST SWITCH tPLH, tPHL Open tPZL, tPLZ VL tPZH, tPHZ GND FIGURE 1. AC Test Circuit TABLE 2. Variable Matrix (Input Characteristics: f = 1MHz; tr = tf = 2ns; Z0 = 50Ω Symbol VCC 3.3V ± 0.3V 2.7V 2.5V ± 0.2V 1.8V ± 0.15V Vmi 1.5V 1.5V VCC /2 VCC /2 Vmo 1.5V 1.5V VCC /2 VCC /2 VX VOL + 0.3V VOL + 0.3V VOL + 0.15V VOL + 0.15V VY VOH − 0.3V VOH − 0.3V VOH − 0.15V VOH − 0.15V VL 6V 6V VCC*2 VCC*2 FIGURE 2. Waveform for Inverting and Non-Inverting Functions FIGURE 3. 3-STATE Output High Enable and Disable Times for Low Voltage Logic FIGURE 4. Propagation Delay, Pulse Width and trec Waveforms FIGURE 5. Setup Time, Hold Time and Recovery Time for Low Voltage Logic 5 www.fairchildsemi.com 74ALVC16838 AC Loading and Waveforms 74ALVC16838 Low Voltage 16-Bit Selectable Register/Buffer with 3.6V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD48 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 6