74LVX132 Low Voltage Quad 2-Input NAND Schmitt Trigger Features General Description ■ Input voltage level translation from 5V to 3V The LVX132 contains four 2-input NAND Schmitt Trigger Gates. The pin configuration and function are the same as the LVX00 but the inputs have hysteresis between the positive-going and negative-going input thresholds, which are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals, thus providing greater noise margins than conventional gates. ■ Ideal for low power/low noise 3.3V applications ■ Guaranteed simultaneous switching noise level and dynamic threshold performance The inputs tolerate voltages up to 7V allowing the interface of 5V systems to 3V systems. Ordering Information Order Number Package Number Package Description 74LVX132M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74LVX132SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LVX132MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. ©1996 Fairchild Semiconductor Corporation 74LVX132 Rev. 1.4.0 www.fairchildsemi.com 74LVX132 — Low Voltage Quad 2-Input NAND Schmitt Trigger February 2008 74LVX132 — Low Voltage Quad 2-Input NAND Schmitt Trigger Connection Diagram Logic Diagram Pin Description Pin Names Descriptions An, Bn Inputs Yn Outputs ©1996 Fairchild Semiconductor Corporation 74LVX132 Rev. 1.4.0 www.fairchildsemi.com 2 Symbol VCC Parameter Rating Supply Voltage –0.5V to +7.0V IIK DC Input Diode Current, VI = –0.5V VI DC Input Voltage IOK DC Output Diode Current –20mA –0.5V to 7V VO = –0.5V –20mA VO = VCC + 0.5V +20mA VO DC Output Voltage –0.5V to VCC + 0.5V IO DC Output Source or Sink Current ±25mA ICC or IGND DC VCC or Ground Current TSTG Storage Temperature P ±50mA –65°C to +150°C Power Dissipation 180mW Recommended Operating Conditions(1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Rating Supply Voltage 2.0V to 3.6V VI Input Voltage 0V to 5.5V VO Output Voltage 0V to VCC TA Operating Temperature ∆t / ∆V Input Rise and Fall Time –40°C to +85°C 0ns/V to 100ns/V Note: 1. Unused inputs must be held HIGH or LOW. They may not float. ©1996 Fairchild Semiconductor Corporation 74LVX132 Rev. 1.4.0 www.fairchildsemi.com 3 74LVX132 — Low Voltage Quad 2-Input NAND Schmitt Trigger Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = –40°C to +85°C TA = +25°C Symbol Vt + Parameter VCC (V) Positive Threshold Conditions Min. Typ. Max. 3.0 Min. 2.2 Max. Units 2.2 V 1.2 V Vt– Negative Threshold 3.0 0.9 VH Hysteresis 3.0 0.3 VOH HIGH Level Output Voltage 2.0 VIN = VIL or VIH, IOH = –50µA 1.9 2.0 1.9 3.0 VIN = VIL or VIH, IOH = –50µA 2.9 3.0 2.9 3.0 VIN = VIL or VIH, IOH = –4mA 2.58 2.0 VIN = VIL or VIH, IOL = 50 µA 0.0 0.1 0.1 3.0 VIN = VIL or VIH, IOL = 50 µA 0.0 0.1 0.1 3.0 VIN = VIL or VIH, IOL = 4 mA 0.36 0.44 VOL LOW Level Output Voltage 0.9 1.2 0.3 V V 2.48 V IIN Input Leakage Current 3.6 VIN = 5.5V or GND ±0.1 ±1.0 µA ICC Quiescent Supply Current 3.6 VIN = VCC or GND 2.0 20 µA Noise Characteristics(2) TA = 25°C Symbol Parameter VCC (V) CL (pF) Typ. Limit Units VOLP Quiet Output Maximum Dynamic VOL 3.3 50 0.3 0.5 V VOLV Quiet Output Minimum Dynamic VOL 3.3 50 –0.3 –0.5 V VIHD Minimum HIGH Level Dynamic Input Voltage 3.3 50 2.0 V VILD Maximum LOW Level Dynamic Input Voltage 3.3 50 0.8 V Note: 2. Input tr = tf = 3ns ©1996 Fairchild Semiconductor Corporation 74LVX132 Rev. 1.4.0 www.fairchildsemi.com 4 74LVX132 — Low Voltage Quad 2-Input NAND Schmitt Trigger DC Electrical Characteristics TA = –40°C to +85°C TA = +25°C Symbol tPLH, tPHL Parameter Propagation Delay Time VCC (V) CL (pF) 2.7 3.3 ± 0.3 tOSLH, tOSHL Output to Output Skew(3) 2.7 Min. Typ. Max. Min. Max. Units 15 7.0 11.5 1.0 13.0 ns 50 10.5 16.0 1.0 18.7 15 6.1 10.6 1.0 12.5 50 9.0 15.4 1.0 17.5 50 3.3 1.5 1.5 1.5 1.5 ns Note: 3. Parameter guaranteed by design tOSLH = |tPLHm–tPLHn|, tOSHL = |tPHLm–tPHLn| Capacitance TA = –40°C to +85°C TA = +25°C Symbol Parameter Min. Typ. Max. 10 CIN Input Capacitance 4 CPD Power Dissipation Capacitance(4) 18 Min. Max. 10 Units pF pF Note: 4. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. C PD × V CC × f IN × I CC Average operating current can be obtained by the eqation: ICC(opr.) = -------------------------------------------------------6 ( per, Gate ) ©1996 Fairchild Semiconductor Corporation 74LVX132 Rev. 1.4.0 www.fairchildsemi.com 5 74LVX132 — Low Voltage Quad 2-Input NAND Schmitt Trigger AC Electrical Characteristics 74LVX132 — Low Voltage Quad 2-Input NAND Schmitt Trigger Physical Dimensions 8.75 8.50 0.65 A 7.62 14 8 B 5.60 4.00 3.80 6.00 PIN ONE INDICATOR 1 1.70 7 0.51 0.35 1.27 0.25 1.27 LAND PATTERN RECOMMENDATION M C B A (0.33) 1.75 MAX 1.50 1.25 SEE DETAIL A 0.25 0.10 C 0.25 0.19 0.10 C NOTES: UNLESS OTHERWISE SPECIFIED A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD GAGE PLANE FLASH OR BURRS. D) LANDPATTERN STANDARD: SOIC127P600X145-14M 0.36 E) DRAWING CONFORMS TO ASME Y14.5M-1994 F) DRAWING FILE NAME: M14AREV13 0.50 X 45° 0.25 R0.10 R0.10 8° 0° 0.90 0.50 (1.04) SEATING PLANE DETAIL A SCALE: 20:1 Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1996 Fairchild Semiconductor Corporation 74LVX132 Rev. 1.4.0 www.fairchildsemi.com 6 74LVX132 — Low Voltage Quad 2-Input NAND Schmitt Trigger Physical Dimensions (Continued) Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1996 Fairchild Semiconductor Corporation 74LVX132 Rev. 1.4.0 www.fairchildsemi.com 7 0.65 0.43 TYP 1.65 6.10 0.45 12.00° TOP & BOTTOM R0.09 min A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 1982 E. LANDPATTERN STANDARD: SOP65P640X110-14M F. DRAWING FILE NAME: MTC14REV6 1.00 R0.09min Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1996 Fairchild Semiconductor Corporation 74LVX132 Rev. 1.4.0 www.fairchildsemi.com 8 74LVX132 — Low Voltage Quad 2-Input NAND Schmitt Trigger Physical Dimensions (Continued) ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EZSWITCH™ * ™ PDP-SPM™ Power220® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter® * ® SupreMOS™ SyncFET™ ® The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 ©1996 Fairchild Semiconductor Corporation 74LVX132 Rev. 1.4.0 www.fairchildsemi.com 9 74LVX132 — Low Voltage Quad 2-Input NAND Schmitt Trigger TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.