GLENAIR 790-027SH

Panel
Mount
Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
Panel Plugs With Socket Contacts, Crimp Termination, 790-027S
A
790-027S connectors are designed for rear-panel mounting and are supplied with
conductive panel gaskets. These connectors feature machined aluminum shells and wire
grommets for environmental protection. Contacts are rear-release snap-in crimp type.
Connectors are supplied with crimp contacts packaged separately. Size #23 signal pins
accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts
accept #12-14 AWG wire. Size 12 and 16 cavities also accept coaxial contacts purchased
separately. Attach optional shielding adapters (799-016) for EMI protection.
B
C
D
How To Order
790-027S
H-66
Part Number
Shell Size Insert Arr.
790-027S
Rear Panel Mounted
Plug with Socket
Contacts
E
See Table 1 for
Available Insert
Arrangements
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in
the insert arrangement.
Example:
36P2 is supplied with 2
power pins.
F
36W2 is supplied less
the power pins.
See Section B for
coaxial contacts
purchased separately.
G
H
Sample Part Number
M
E
P
Shell Finish
EMI Spring
Hardware Option
M
E
Electroless Nickel
EMI Spring
MT
N
general purpose applications
Nickel-PTFE
N
No Hardware
No Spring
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
EMI
SPRING
G
Guide Pin
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
P
Female Jackpost
Additional shell finishes
are listed on page C-9.
S
Female Guide Socket
Specifications
INDEX
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
© 2009 Glenair, Inc.
Materials and Finishes
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulators
Retention Clips
Grommet
Hardware
Panel Gasket
Aluminum alloy
Copper alloy, 50 microinches gold
plated, stainless steel hood
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Fluorosilicone, conductive
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-6
Rev. 04-July-2009
E-Mail: [email protected]
Table 1 Contact Arrangements
Layout
A-5
Contact
Quantity
#23 #16 #12
5
B-2P2
Face View
Cross-Sectional View of 790-027S
RETAINING CLIP
FRONT INSULATOR
9
C-13
13
D-15
15
D-3P3
A
.183 (4.65)
.025 (0.64)
REAR INSULATOR
EMI GASKET
GROMMET
EMI SPRING
2
B-9
Panel
Mount
Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
POTTING
SOCKET CONTACT
WIRE (REF.)
3
D-7P2
5
2
E-11P2
9
2
E-19
19
E-7P3
4
SHELL
.007
(0.18)
D
3
23
F-5P5
5
G-33
33
H-10P4
6
N
4
H-29P7 22 7
H-36P2 34
No Mating Hardware
Connector is supplied with threaded holes. Shell
sizes H and L have #6-32 threads, other sizes have
#4-40 threads. Thread depth is .150" (3.8).
2
P
Jackposts
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and L have
#4-40 UNC thread, other sizes have #2-56 thread.
Stainless steel.
H-54P2 52 2
H-5P5
H-66
66
G
J-25P2 23 2
Guide Pins
33
J-7P7
Connector is supplied with stainless steel nonremovable guide pins. Mates with type "S" guide
sockets on corresponding receptacle connector.
7
S
Guide Sockets
Connector is supplied with stainless steel nonremovable bushings. Mates with type "G" guide
pins on corresponding receptacle connector.
K-27P4 23 4
K-9P9
F
43
9
L-6P6
© 2009 Glenair, Inc.
6
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
G
H
INDEX
K-35P2 33 2
K-43
E
5
J-17P4 13 4
J-33
C
Table 2 Hardware Option
F-15P2 13 2
F-23
B
E-7
Rev. 04-July-2009
E-Mail: [email protected]
Panel
Mount
Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
790-027s shell size a,b,c,d,e,f,j,k Dimensions
A
A MAX
B BASIC
C BASIC
D MAX
B
.233 (5.92)
MAX
blind mate
.158
(4.01)
C
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
JACKPOST SHOWN FOR
REFERENCE.
SPRING,
EMI
.335 (8.51)
.640
MAX
(16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
D
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
E MAX
C BASIC
.215 (5.46)
MAX
.485
(12.32)
MAX
E
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
790-027S Size A-F, J, K Dimensions
F
Shell
Size
A
B
C
D
E
F
J
K
G
A Max.
In.
mm.
1.211
1.361
1.511
1.611
1.761
1.911
2.261
2.661
30.76
34.57
38.38
40.92
44.73
48.54
57.43
67.59
B Basic
In . mm.
.925
1.075
1.225
1.325
1.475
1.625
1.975
2.375
23.50
27.31
31.12
33.66
37.47
41.28
50.17
60.33
C Basic
In.
mm.
.565
.715
.865
.965
1.115
1.265
1.615
2.015
14.35
18.16
21.97
24.51
28.32
32.13
41.02
51.18
D Max.
In.
mm.
.335
.485
.635
.735
.885
1.035
1.390
1.795
8.51
12.32
16.13
18.67
22.48
26.29
35.31
45.59
E Max.
In.
mm.
.760
.910
1.060
1.160
1.310
1.460
1.810
2.210
19.30
21.11
26.92
29.46
33.27
37.08
45.97
56.13
H
INDEX
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-8
Rev. 04-July-2009
E-Mail: [email protected]
Panel
Mount
Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
790-027s shell size g Dimensions
A
1.861 (47.27) MAX
1.575 (40.01) BASIC
1.215 (30.86) BASIC
.320 (8.13)
MAX
1.010 (25.65) MAX
.158 (4.01)
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
B
JACKPOST SHOWN FOR
REFERENCE.
C
.335 (8.51)
MAX
.640 (16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
D
1.410 (35.81)
MAX
1.215 (30.86) BASIC
.215 (5.46)
MAX
E
.575 (14.61)
MAX
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
F
G
blind mate
H
INDEX
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-9
Rev. 04-July-2009
E-Mail: [email protected]
Panel
Mount
Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
790-027s shell size H and l Dimensions
A
F MAX
G BASIC
H BASIC
J MAX
B
C
D
blind mate
.349 (8.86)
MAX
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
JACKPOST SHOWN FOR REFERENCE.
SEE ORDERING INFORMATION FOR
OTHER OPTIONS.
.158 (4.01)
SHELL SIZES H, L
+/- .040 (1.02) ALLOWABLE MISALIGNMENT
FROM CENTERLINE
.385 (9.78)
MAX
.640 (16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
K MAX
E
H BASIC
.265 (6.73)
MAX
.600 (15.24)
MAX
F
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
790-027S Size H & L Dimensions
G
Shell
Size
H
L
F Max.
In.
mm.
G Basic
In.
mm.
H Basic
In.
mm.
J Max.
In.
mm.
K Max.
In.
mm.
2.500 63.50
2.736 69.49
2.236 56.79
2.472 62.79
1.800 45.72
2.036 51.71
1.385 35.18
1.623 41.22
2.045 51.94
2.281 57.94
H
INDEX
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-10
Rev. 04-July-2009
E-Mail: [email protected]