PCB Connectors Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors Panel Plugs With Socket Contacts, Straight PCB Termination, 790-029S A Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for thru-hole printed circuit board termination. 790-029S connectors are designed for rear-panel mounting and are supplied with conductive panel gaskets. Contacts are permanently installed and are sealed with epoxy. Shells are aluminum alloy. Threaded board mounting holes and integral standoffs simplify installation. Available in 29 different contact arrangements, these connectors feature size #23 signal contacts along with #16 and #12 power contacts for up to 23 amps current rating. Optional EMI spring improves shell-to-shell conductivity and shielding performance. Stainless steel jackposts are non-removable. B C D E How To Order Sample Part Number 790-029S K-43 M E P B Part Number Shell Size Insert Arr. Shell Finish EMI Spring Hardware Option PC Tail Length See Table 1 790-029S for Available Rear Panel Mounted Insert Plug with Straight PC Tail Contacts for Termination Arrangements to Backplanes or Flexible Circuits M E Electroless Nickel a EMI Spring general purpose applications MT No Spring 1000 Hour Grey™ maximum corrosion protection and durability (non-reflective grey) B N N Nickel-PTFE .125 Inch (3.2 mm.) .250 inch (6.4 mm.) No Hardware EMI SPRING G Guide Pin ZNU PC TAIL LENGTH Zinc-Nickel with Black Chromate F tactical applications (non-reflective black) P Female Jackpost Additional shell finishes are listed on page C-9. G S Female Guide Socket H Specifications INDEX Current Rating Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration © 2009 Glenair, Inc. Materials and Finishes #23 5 AMPS, #16 13 A., #12 23 A. #23 500 VAC RMS, #12 and #16 1800 VAC RMS 5000 megohms minimum -65° C. to +150° C. 300 g. 37 g. Shell Contacts Insulator Hardware Panel Gasket Encapsulant Aluminum alloy Copper alloy, 50 microinches gold plated, with stainless steel hoods Liquid crystal polymer (LCP) 300 series stainless steel Fluorosilicone, conductive Epoxy Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-16 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors Table 1 Contact Arrangements Layout A-5 Contact Quantity #23 #16 #12 5 B-2P2 Cross-Sectional View of 790-029S .183 (4.65) Face View A EMI GASKET .025 (0.64) INSULATOR EPOXY EMI SPRING CONTACT SOCKET 2 B-9 9 C-13 13 D-15 15 D-3P3 B SHELL .007 (0.18) 3 D-7P2 5 2 E-11P2 9 2 E-19 19 E-7P3 4 C Table 2 Hardware Option D 3 F-15P2 13 2 F-23 23 F-5P5 N 5 G-33 33 H-10P4 6 No Mating Hardware 4 Connector is supplied with threaded holes. Shell sizes H and L have #6-32 threads, other sizes have #4-40 threads. Thread depth is .150" (3.8). P Jackposts Connector is supplied with non-removable stainless steel jackposts. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. E H-29P7 22 7 H-36P2 34 F 2 H-54P2 52 2 H-5P5 H-66 5 66 G J-17P4 13 4 Guide Pins Connector is supplied with stainless steel nonremovable guide pins. Mates with type "S" guide sockets on corresponding receptacle connector. J-25P2 23 2 J-33 33 J-7P7 S Guide Sockets Connector is supplied with stainless steel nonremovable bushings. Mates with type "G" guide .018/.022 pins on corresponding receptacle connector. (0.46/0.56) H 7 K-27P4 23 4 K-9P9 PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) 43 9 L-6P6 © 2009 Glenair, Inc. 6 .510 (12.95) MAX Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-17 Rev. 04-July-2009 E-Mail: [email protected] INDEX K-35P2 33 2 K-43 G PCB Connectors Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors 790-029S shell size a,b,c,d,e,f,j,k Dimensions A A MAX B BASIC .233 (5.92) MAX C BASIC D MAX B C D 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES JACKPOST SHOWN FOR REFERENCE. .158 (4.01) blind mate CONTACT TAIL DIA #23 CONTACT .018/.022 (0.46/0.56) #16 CONTACT .060/.064 (1.52/1.63) PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) SHELL SIZES A, B, C, D, E, F, G, J, K +/- .030 (0.76) ALLOWABLE MISALIGNMENT FROM CENTERLINE .335 (8.51) MAX .510 (12.95) MAX .093 ± .005 (2.36 ± 0.13) E MAX E C BASIC .215 (5.46) MAX .485 (12.32) MAX 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES F 790-029S Size A-F, J, K Dimensions Shell Size A B C D E F J K G H INDEX © 2009 Glenair, Inc. A Max. In. mm. 1.211 1.361 1.511 1.611 1.761 1.911 2.261 2.661 30.76 34.57 38.38 40.92 44.73 48.54 57.43 67.59 B Basic In . mm. .925 1.075 1.225 1.325 1.475 1.625 1.975 2.375 23.50 27.31 31.12 33.66 37.47 41.28 50.17 60.33 C Basic In. mm. .565 .715 .865 .965 1.115 1.265 1.615 2.015 14.35 18.16 21.97 24.51 28.32 32.13 41.02 51.18 D Max. In. mm. .335 .485 .635 .735 .885 1.035 1.390 1.795 8.51 12.32 16.13 18.67 22.48 26.29 35.31 45.59 E Max. In. mm. .760 .910 1.060 1.160 1.310 1.460 1.810 2.210 19.30 21.11 26.92 29.46 33.27 37.08 45.97 56.13 Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-18 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors 790-029S shell size G Dimensions 1.861 (47.27) MAX 1.575 (40.01) BASIC 1.215 (30.86) BASIC 1.010 (25.65) MAX .158 (4.01) 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES blind mate .320 (8.13) MAX JACKPOST SHOWN FOR REFERENCE. .335 (8.51) MAX .018/.022 (0.46/0.56) B PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) .510 (12.95) MAX .093 ± .005 (2.36 ± 0.13) A SHELL SIZES A, B, C, D, E, F, G, J, K +/- .030 (0.76) ALLOWABLE MISALIGNMENT FROM CENTERLINE C D 1.410 (35.81) MAX 1.215 (30.86) BASIC E .215 (5.46) MAX .575 (14.61) MAX F 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES G H INDEX © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-19 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors 790-029S shell size h AND L Dimensions A F MAX G BASIC H BASIC J MAX .349 (8.86) MAX B C D 4-40 UNC-2B X .150 (3.81) MIN 2 PLACES JACKPOST SHOWN FOR REFERENCE. SEE DETAIL ‘A’ CONTACT TAIL DIA #23 CONTACT .018/.022 (0.46/0.56) #16 CONTACT .060/.064 (1.52/1.63) #12 CONTACT .096/.092 (2.44/2.34) PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) .158 (4.01) .335 (8.51) .510 (12.95) MAX MAX .093 ± .005 (2.36 ± 0.13) blind mate K MAX E F G H BASIC .265 (6.73) MAX .600 (15.24) MAX 4-40 UNC-2B X .150 (3.81) MIN 2 PLACES SHELL SIZES H, L +/- .040 (1.02) ALLOWABLE MISALIGNMENT FROM CENTERLINE 790-029S Size H & L Dimensions Shell Size H L F Max. In. mm. G Basic In. mm. H Basic In. mm. J Max. In. mm. K Max. In. mm. 2.500 63.50 2.736 69.49 2.236 56.79 2.472 62.79 1.800 45.72 2.036 51.71 1.385 35.18 1.623 41.22 2.045 51.94 2.281 57.94 H INDEX © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-20 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors PCB Hole Patterns for 790-029S and 790-044S Plugs This section contains printed circuit board footprints for vertical mounted Series 79 plugs. The contact identification numbers are shown for the connector mounting side of the PC board. Contact tails are gold over nickel plated. Insert Arr. PC Tail Diameter Ø Diameter In. mm. #23 #16 #12 .018-.022 .060-.064 .092-.096 0.46-0.56 1.52-1.63 2.34-2.44 790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS A B Component Mounting Side of PCB .565 (14.35) .2825 (7.18) A-5 Contact Size .075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x C (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 5x) .003 M A M 3 2 .003 M A M 1 D 4 5 .0325 (0.83) TYP .065 (1.65) .0375 (0.95) TYP .715 (18.16) (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X) .270 (6.86) E .003 M A M b-2p2 .094 ± .003 (2.39 ±0.08) 2x A1 A2 .003 M A M F .175 (4.45) .715 (18.16) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 9x) .2075 (5.27) b-9 .075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x .003 M A M 3 4 5 2 G 1 .003 M A M 8 9 7 6 .0325 (0.83) TYP .065 (1.65) .0375 (0.95) TYP .865 (21.97) .2075 (5.27) .094 ± .003 (2.39 ±0.08) 2x .003 M A M 7 13 6 12 5 4 11 .0375 (0.95) TYP © 2009 Glenair, Inc. 10 3 2 9 .003 M A M INDEX c-13 .075 (1.91) TYP H (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x) 1 8 .0325 (0.83) TYP .065 (1.65) Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-25 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors A Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors Insert Arr. 790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS Component Mounting Side of PCB .965 (24.51) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 15x) .220 (5.59) B D-15 .075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x 7 8 .003 M A M 15 14 3 4 5 6 2 12 11 10 13 .003 M A M 1 9 .0325 (0.83) TYP .065 (1.65) .0375 (0.95) TYP C .965 (24.51) .3075 (7.81) D-3P3 D (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 3x) .175 (4.45) 2x .003 M A M .094 ± .003 (2.39 ±0.08) 2x A3 .003 M A M A1 A2 .965 (24.51) E D-7P2 .094 ± .003 (2.39 ±0.08) 2x .410 (10.41) .075 (1.91) TYP 3 A2 .003 M A M 2 .003 M A M 1 A1 4 5 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X) F (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 5x) .4075 (10.35) .2275 (5.78) .0375 (0.95) TYP .003 M A M 1.115 (28.32) .445 (11.30) E-11P2 .094 ± .003 (2.39 ±0.08) 2x (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 9x) .075 (1.91) TYP .278 (7.06) G .0325 (0.83) TYP .065 (1.65) 3 4 A2 .003 M A M 1 .0375 (0.95) .003 M A M .003 M A M A1 5 6 7 8 9 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X) 2 TYP .559 (14.20) H 1.115 (28.32) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 19x) .220 (5.59) INDEX E-19 .094 ± .003 (2.39 ±0.08) 2x .003 M A M .075 (1.91) TYP 10 19 9 8 18 17 7 6 16 15 .0375 (0.95) TYP © 2009 Glenair, Inc. .0325 (0.83) TYP .065 (1.65) 5 4 14 13 3 2 .003 M A M 1 12 11 .0325 (0.83) TYP .065 (1.65) Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-26 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors Insert Arr. 790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 3x) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 4x) 1.115 (28.32) .5575 (14.16) E-7P3 .094 ± .003 (2.39 ±0.08) 2x .175 (4.45) 2x 2 .003 M A M A2 A3 .1225 (3.11) .0325 (0.83) TYP .065 (1.65) 1.265 (32.13) .2805 (7.13) .075 (1.91) TYP 3 4 5 6 A2 2 13 12 11 10 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) A1 7 8 9 .003 M A M 1 .003 M A M .0325 (0.83) TYP .065 (1.65) .0375 (0.95) TYP .704 (17.88) .003 M A M 1.265 (32.13) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x) .220 (5.59) f-23 .075 (1.91) TYP 12 11 10 .003 M A M 23 22 21 7 8 9 20 19 4 5 6 3 D E .003 M A M 2 16 15 18 17 C (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x) .445 (11.30) .094 ± .003 (2.39 ±0.08) 2x B 3 .595 (15.11) .094 ± .003 (2.39 ±0.08) 2x .003 M A M 1 A1 4 .0375 (0.95) TYP f-15p2 A Component Mounting Side of PCB 1 14 13 .0325 (0.83) TYP .065 (1.65) .0375 (0.95) TYP F 1.265 (32.13) .2825 (7.18) f-5p5 .094 ± .003 (2.39 ±0.08) 2x .003 M A M A4 A5 A3 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) G A1 A2 .175 (4.45) 4x .003 M A M 1.215 (30.86) .075 (1.91) TYP .094 ± .003 (2.39 ±0.08) 2x .003 M A M 12 11 10 23 22 21 33 32 9 20 31 8 19 30 7 6 18 17 29 28 5 4 16 15 27 26 3 2 1 14 13 25 24 .0375 (0.95) TYP © 2009 Glenair, Inc. .003 M A M Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 .065 (1.65) TYP .130(3.30) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-27 Rev. 04-July-2009 E-Mail: [email protected] INDEX g-33 H (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x) .195 (4.95) PCB Connectors A Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors Insert Arr. 790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS Component Mounting Side of PCB 1.800 (45.72) .428 (10.87) B h-10p4 .125 ± .003 (3.18 ±0.08) 2x .0375 (0.95) TYP .075 (1.91) TYP 2 A2 3 .003 M A M (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 4x) .003 M A M 6 .472 (11.99) .944 (23.98) 1.800 (45.72) C .290 (7.37) h-29p7 .125 ± .003 (3.18 ±0.08) 2x .003 M A M D (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 22x) .175 (4.45) TYP .075 (1.91) .050 (1.27) TYP 21 18 20 22 17 19 A7 15 14 16 12 A5 9 11 8 A4 7 E h-36p2 .125 ± .003 (3.18 ±0.08) 2x .0375 (0.95) TYP .075 (1.91) TYP 8 7 A2 A3 A1 .003 M A M 25 24 .100 (2.54) TYP .003 M A M (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 34x) 23 22 21 31 2 30 .065 (1.65) TYP A1 9 19 20 18 27 26 29 28 (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 2x) .003 M A M .944 (23.98) 1.800 (45.72) .320 (8.13) h-54p2 .125 ± .003 (3.18 ±0.08) 2x 14 13 A2 27 .003 M A M .0375 (0.95) TYP .075 (1.91) TYP 12 11 10 9 26 39 38 52 51 24 25 37 .0925 (2.35) H 8 7 21 20 36 35 34 50 49 48 47 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 52x) .003 M A M 23 22 19 45 18 31 44 3 4 5 6 33 32 46 .0325 (0.83) TYP 1 12 11 10 .1725 (4.38) F G 3 4 5 14 13 33 32 34 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 7x) .003 M A M 6 16 15 17 A2 1 4 1.800 (45.72) .428 (10.87) 2 3 5 6 10 .175 (4.45) 6x .375 (9.53) .043 (1.09) TYP .100 (2.54) .057 (1.45) .003 M A M 13 A6 .065 (1.65) A1 4 5 .236 (5.99) .0325 (0.83) TYP .003 M A M 1 A3 A4 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 6x) 17 30 43 2 16 15 .0325 (0.83) TYP .065 (1.65) TYP 1 A1 29 28 42 41 40 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) .003 M A M 1.160 (29.46) 1.800 (45.72) .428 (10.87) INDEX H-5p5 .125 ± .003 (3.18 ±0.08) 2x A5 .236 (5.99) 4x © 2009 Glenair, Inc. A3 A4 A2 A1 .003 M A M (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 5x) .944 (23.98) Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 .003 M A M Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-28 Rev. 04-July-2009 E-Mail: [email protected] PCB Connectors Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors Insert Arr. 790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS 1.800 (45.72) .300 (7.62) H-66 A Component Mounting Side of PCB 16 15 .125 ± .003 (3.18 ±0.08) 2x 33 32 .003 M A M (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 66x) .0375 (0.95) TYP 49 48 12 11 10 14 13 31 30 29 28 47 46 45 66 65 64 .003 M A M 63 62 44 43 23 22 21 41 39 38 58 40 57 2 20 19 1 .065 (1.65) TYP 18 17 35 34 37 36 55 54 56 .1725 (4.38) 3 4 5 6 25 24 42 60 59 61 7 8 9 27 26 .0325 (0.83) TYP 53 52 51 50 .075 (1.91) TYP 1.615 (41.02) .003 M A M .150 (3.81) .2575 (6.54) J-17P4 .094 ± .003 (2.39 ±0.08) 2x B (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x) .075 (1.91) TYP A4 7 A3 3 4 5 6 2 A2 1 C A1 .003 M A M 13 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 4x) 12 11 10 8 9 .0325 (0.83) TYP .065 (1.65) TYP .0375 (0.95) TYP 1.100 (27.94) .175 (4.45) .003 M A M D 1.615 (41.02) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x) .395 (10.03) .2575 (6.54) J-25P2 .094 ± .003 (2.39 ±0.08) 2x .075 (1.91) TYP A2 12 .003 M A M 11 10 23 22 21 9 20 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 7 19 5 6 18 17 3 4 16 15 2 1 A1 14 13 .0325 (0.83) TYP .065 (1.65) TYP .0375 (0.95) TYP 1.100 (27.94) .003 M A M E .003 M A M 8 1.615 (41.02) .2075 (5.27) J-33 .094 ± .003 (2.39 ±0.08) 2x (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x) .075 (1.91) TYP 16 15 17 .003 M A M 14 13 12 11 10 8 9 7 6 5 3 4 2 .003 M A M 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 1 18 H 1.615 (41.02) .2825 (7.18) A7 A6 A5 A4 .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) A3 A2 INDEX J-7P7 A1 .175 (4.45) 6x .003 M A M © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-29 Rev. 04-July-2009 G .0325 (0.83) TYP .065 (1.65) TYP .0375 (0.95) TYP .094 ± .003 (2.39 ±0.08) 2x F E-Mail: [email protected] PCB Connectors A Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors 790-029S AND 790-044S PRINTED CIRCUIT BOARD PATTERNS Insert Arr. Component Mounting Side of PCB 2.015 (51.18) .4325 (10.99) B .094 ± .003 (2.39 ±0.08) 2x K-27P4 A4 (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x) .0375 (0.95) TYP .075 (1.91) TYP .595 (15.11) 11 10 12 A3 9 8 7 23 22 21 6 5 1 2 3 4 A2 A1 20 19 16 15 17 18 14 13 .0325 (0.83) TYP .065 (1.65) TYP 1.150 (29.21) 1.500 (38.1) C 2.015 (51.18) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x) .4075 (10.35) .2575 (6.54) .094 ± .003 (2.39 ±0.08) 2x K-35P2 .003 M A M .075 (1.91) TYP 17 A2 14 13 12 11 10 16 15 9 8 7 6 5 2 3 4 1 A1 .003 M A M D 33 32 31 30 29 28 27 26 (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 25 24 23 22 21 20 19 18 .0325 (0.83) TYP .065 (1.65) TYP .0375 (0.95) TYP 1.500 (38.1) .003 M A M 2.015 (51.18) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 43x) .0375 (0.95) TYP .220 (5.59) K-43 .003 M A M .003 M A M .003 M A M .2575 (6.54) E (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 4x) .094 ± .003 (2.39 ±0.08) 2x .075 (1.91) TYP 22 21 20 19 18 17 16 15 14 13 12 .065 (1.65) TYP 11 10 9 8 7 6 5 3 4 2 1 .003 M A M 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 .0325 (0.83) TYP F 2.015 (51.18) G (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 9 .3075 (7.81) K-9P9 .094 ± .003 (2.39 ±0.08) 2x .003 M A M A8 A9 A7 .003 M A M A5 A6 A4 A3 A2 A1 .175 (4.45) H 2.036 (51.71) .428 (10.87) INDEX .125 ± .003 (3.18 ±0.08) 2x L-6P6 A6 A5 A4 A3 A2 A1 .003 M A M (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 6x) .236 (5.99) 5x © 2009 Glenair, Inc. .003 M A M Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-30 Rev. 04-July-2009 E-Mail: [email protected]