Oscilent Corporation RF SAW Filter | 802-RF2140.0M-A Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 802-RF2140.0M-A 3.0 x 3.0 SMD WCDMA System Nov. 07 2003 . TYPE : 2140.0 MHz RF SAW Filter PART NUMBER : 802-RF2140.0M-A . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 2140.0 - MHz 2110 ~ 2170 MHz - 2.2 3.5 dB DC Voltage - - - 7.5 V Input Power - - - 15 dBm Operating Temperature - -30 - +85 °C Storage Temperature - -40 - +85 °C Center Frequency Insertion Loss Ripple Stopband Attenuation VSWR Teminating Impedance 2110 ~ 2170 MHz - .9 1.5 dB DC ~ 500 MHz 25.0 35.0 - dB 500 ~ 2025 MHz 20.0 30.0 - 2025 ~ 2050 MHz 27.0 37.0 - 2230 ~ 2260 MHz 41.0 51.0 - 2490 ~ 2550 MHz 31.0 41.0 - 2110 ~ 2170 MHz - 1.8 2.5 - - - 50 - ohm * Maximum Rating (Ta=25°C) ** Custom SAW RF Filters available. Contact Oscilent for assistance. . Pin Layout A Ground B Output C Ground D Ground E Input F Ground Frequency Reponse http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf2140_0a.htm 12/28/2005 Oscilent Corporation RF SAW Filter | 802-RF2140.0M-A Page 2 of 2 VSWR (S11, S22) Smith Chart Oscilent Corporation - CALL 949.252.0522 17962 Sky Park Circle . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Part No.: 802-RF2140.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf2140_0a.htm 12/28/2005