Oscilent Corporation RF SAW Filter | 802-RF1960.0M-A Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 802-RF1960.0M-A 3.0 x 3.0 SMD WCDMA System Nov. 07 2003 . TYPE : 1960.0 MHz RF SAW Filter PART NUMBER : 802-RF1960.0M-A . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 1960.0 - MHz 1930 ~ 1990 MHz - 2.4 3.5 dB DC Voltage - - - 7.5 V Input Power - - - 15 dBm Operating Temperature - -30 - +85 °C Storage Temperature - -40 - +85 °C Center Frequency Insertion Loss Ripple Stopband Attenuation VSWR Teminating Impedance 1930 ~ 1990 MHz - 1.0 2.0 dB DC ~ 1850 MHz 20.0 32.0 - dB 1850 ~ 1910 MHz 10.0 21.0 - 2030 ~ 2080 MHz 35.0 45.0 - 2110 ~ 2170 MHz 28.0 37.0 - 2170 ~ 2550 MHz 25.0 34.0 - 1930 ~ 1990 MHz - 1.7 2.5 - - - 50 - ohm * Maximum Rating (Ta=25°C) ** Custom SAW RF Filters available. Contact Oscilent for assistance. . Pin Layout Frequency Reponse A Ground B Output C Ground D Ground E Input F Ground Oscilent Corporation RF SAW Filter | 802-RF1960.0M-A Page 2 of 2 VSWR (S11, S22) Smith Chart Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 802-RF1960.0M-A