Oscilent Corporation IF SAW Filter | 813-IF75.0M-C Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-IF75.0M-C 13.3 x 6.5 SMD Base Station & Repeater May 24 2003 . TYPE : 75.0 MHz Bandpass Filter 19.8 MHz Bandwidth PART NUMBER : 813-IF75.0M-C .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 74.92 75.00 75.08 MHz Insertion Loss - 22.5 24.0 dB 1dB Bandwidth 19.1 19.5 - MHz 3dB Bandwidth 19.8 20.0 - MHz 33dB Bandwidth - 21.7 22.0 MHz 40dB Bandwidth - 22.0 22.5 MHz Passband Ripple - 0.75 1.0 dB Group Delay Variation - 50 120 nsec Absolute Delay - 1.10 - µsec Ultimate Rejection - 42 - dB Substrate Material - LN - - Center Frequency * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE TEST FIXTURE (mm) L2 = 330nH C2 = 10pF Source/Load Impedance = 50 ohms Part No.: 813-IF75.0M-C Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if75_0c.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 813-IF75.0M-C Page 2 of 2 Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if75_0c.htm 12/28/2005