Oscilent Corporation IF SAW Filter | 813-IF70.0M-CA Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 813-IF70.0M-CA 13.3 x 6.5 SMD Base Station & Repeater May 30 2003 . TYPE : 70.0 MHz Bandpass Filter 9.7 MHz Bandwidth PART NUMBER : 813-IF70.0M-CA .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 70.00 - MHz Insertion Loss - 22.5 24.0 dB 1dB Bandwidth 9.2 9.3 - MHz 3dB Bandwidth 9.7 9.8 - MHz 40dB Bandwidth - 11.7 12.0 MHz Passband Ripple (Fo ±4.0MHz) - 0.80 1.0 dB nsec Group Delay Variation (Fo ±4.0MHz) Ultimate Rejection Temperature Coefficient - 60 150 40 42 - dB - -18 - ppm/K * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE TEST FIXTURE (mm) L1 = 150nH C1 = 33pF L2 = (330+15)nH C2 = 51pF Source/Load Impedance = 50 ohms Part No.: 813-IF70.0M-CA Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if70_0ca.htm 12/28/2005