Oscilent Corporation IF SAW Filter | 835-IF160.0M-H Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF160.0M-H 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007 TYPE : 160.0 MHz Bandpass Filter 4.20 MHz Bandwidth PART NUMBER : 835-IF160.0M-H OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency (Fo) - 160.0 - MHz Insertion Loss at Fo - 22.5 25.0 dB Bandwidth at 1.0 dB 4.00 4.05 - MHz Bandwidth at 3.0 dB 4.20 4.26 - MHz Bandwidth at 40.0 dB - 4.96 5.2 MHz Passband Ripple - 0.75 1.0 dB Group Delay Variation - 160 300 nsec Adsolute Delay - 5.25 - usec Substrate Material - LN - - ** Custom SAW IF Filters available. Contact Oscilent for assistance. ** It need to PKG ground for more Excellent Spurious levels. PACKAGE OUTLINE (mm) TEST ENVIRONMENT L1 = 15 nH Oscilent Corporation IF SAW Filter | 835-IF160.0M-H Page 2 of 2 L2 = 15 nH C1 = 43 pF C2 = 36 pF Source & Load Impedance: 50 ohm Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 835-IF160.0M-H