Oscilent Corporation IF SAW Filter | 835-IF75.0M-E Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF75.0M-E 35.0 x 12.8 Thru Hole Base Station & Repeater May 24 2003 . TYPE : 75.0 MHz Bandpass Filter 19.20 MHz Bandwidth PART NUMBER : 835-IF75.0M-E .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 69.95 75.00 75.05 MHz Insertion Loss - 24.0 26.0 dB 1dB Bandwidth 18.90 19.00 - MHz 3dB Bandwidth 19.20 19.40 - MHz 18dB Bandwidth - 20.20 20.40 MHz 33dB Bandwidth - 20.50 20.70 MHz 50dB Bandwidth - 20.70 20.90 MHz Passband Ripple - 0.65 1.0 dB Center Frequency - 65 100 nsec Ultimate Rejection 50 55 - dB Substrate Material - LN - - Ambient Temperature - 25 - °C Group Delay Variation * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE L1 = 120nH C1 = 62pF L2 = 180nH C2 = 43pF Source/Load Impedance = 50 ohms Part No.: http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if75_0e.htm 835-IF75.0M-E 12/28/2005 Oscilent Corporation IF SAW Filter | 835-IF75.0M-E Page 2 of 2 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if75_0e.htm 12/28/2005