Oscilent Corporation IF SAW Filter | 835-IF80.7M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF80.7M-A 35.0 x 12.8 Thru Hole Base Station & Repeater May 24 2003 . TYPE : 80.7 MHz Bandpass Filter 11.20 MHz Bandwidth PART NUMBER : 835-IF80.7M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 80.7 - MHz Insertion Loss - 25.2 28.0 dB 3dB Bandwidth - 11.2 - MHz 40dB Bandwidth - 12.8 - MHz Passband Ripple - 0.8 1.2 dB Group Delay Variation - 80 150 nsec Ultimate Rejection - 50 55 dB Substrate Material - LT - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE L1 = 120nH C1 = 62pF L2 = 180nH C2 = 43pF Source/Load Impedance = 50 ohms Part No.: http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if80_7a.htm 835-IF80.7M-A 12/28/2005 Oscilent Corporation IF SAW Filter | 835-IF80.7M-A Page 2 of 2 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if80_7a.htm 12/28/2005