Oscilent Corporation IF SAW Filter | 838-IF65.0M-D Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 838-IF65.0M-D 38.0 x 25.0 Thru Hole Base Station & Repeater May 24 2003 . TYPE : 65.0 MHz Bandpass Filter 19.30 MHz Bandwidth PART NUMBER : 838-IF65.0M-D .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 64.92 65.00 65.08 MHz Insertion Loss - 24.5 26.0 dB 1dB Bandwidth 19.10 19.30 - MHz 3dB Bandwidth 19.30 19.60 - MHz 40dB Bandwidth - 20.80 20.90 MHz Passband Ripple - 0.6 1.0 dB Group Delay Variation - 70 120 nsec Absolute Delay - 2.87 - µsec Center Frequency Ultimate Rejection 50 55 - dB Substrate Material - LN - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Contact Oscilent for Test Fixture Details http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if65_0d.htm 12/30/2005 Oscilent Corporation IF SAW Filter | 838-IF65.0M-D Page 2 of 2 Part No.: 838-IF65.0M-D Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if65_0d.htm 12/30/2005