Oscilent Corporation IF SAW Filter | 820-IF82.0M-A Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 820-IF82.0M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003 . TYPE : 82.0 MHz Bandpass Filter 5.65 MHz Bandwidth PART NUMBER : 820-IF82.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 82 - MHz Insertion Loss - 17.5 19.0 dB 3dB Bandwidth 5.65 5.8 - MHz 40dB Bandwidth - 7.4 7.6 MHz Passband Ripple - 0.75 1.0 dB Ultimate Rejection 50 55 - dB Substrate Material - LN - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Part No.: 820-IF82.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if82_0a.htm 12/28/2005