REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. PHYSICAL DIMENSIONS: 28.4MAX 40.0 ± 0.5 54.0MAX 50.0MAX 39.5MAX APPROVED 1-2. CURRENT RATING A. @ 115 VAC..........................................10 A RMS MAX B. @ 250 VAC.........................................10 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................2.0 uA MAX B. @ 250 VAC 50Hz.............................5.0 uA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / 0 1 2 8 10 12 12 8 DIF. MODE dB / 1 2 4 10 15 25 30 30 FREQ. MHz 40.0 ± 0.13 28.45 ± 0.5 0 21.6 ± 0 0.5 21.3MAX M3(2X) R3.0(4X) DATE ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC Ø3.3(2X) 52.0 ± 0.5 DESCRIPTION 1-7. OPERATING TEMPERATURE.................-25° TO +100° C 1-8. SAFETY: 1-9. RoHS COMPLIANT PANEL CUTOUT SCHEMATIC: L: 0.2mH C1: 0.1uF Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 858-10/084 EMI FILTER UNIT: in 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 R.Nuti 12-20-07 12-20-07 JJH / 12-20-07