Application: US Patent # 7,281,821 Dialight's L864 LED Based Class I, Division 2 certified medium intensity red beacon was designed to easily interface into existing systems or to be provided as a red lighting fixture for new installations. The beacon is used to mark any obstacle that may provide hazards to aircraft navigation. Versions of this fixture are available in 120VAC or 230VAC. SafeSite® L-864 Red LED Medium Intensity Beacon Mechanical Information: Container Dimensions: 24” X 24” X 24” 610mm x 610mm x 610mm Container Weight: 32lbs (12.70 kg) Mounting: Electrical specifications: Current (Amps): 0.4 / 0.2 Power Consumption: (nom) 48 W Operating Temp: -40ºF to +133ºF (-40ºC to +55ºC) Power Factor: > 0.9 Material: Dimensions in Inches [mm] Certifications & Ratings: w Class I, Div 2, Groups A, B, C, D hazardous environments T5 rated w ATEX certified, equipment group II (surface industries), category 3 (Zone 2), T4 rated w FAA AC No. 150/5345-43F w Compliant to: ICAO (Annex 14 - Fourth Edition, July 2004), DGAC Mexico w Canadian Aviation Regulation CAR 621.9 (Transport Canada) w IP66 / NEMA 4X rated w ETL Listed in compliance with UL1598 and UL844for use in Class I, Div 2 hazardous locations Housing: Cast aluminum Lens: Polycarbonate Accessories (Hardware): Stainless steel Mounting Information Features & Benefits: w Uses 90% less energy than an incandescent w Resistant to shock and vibration w Lasts years longer than an incandescent w Flash or steady burn w 5 year warranty Order Codes: Class 1, Div 2 Beacon D164-B13-001 Class I, Div 2 120/230 VAC Beacon Beacon Bottom View ATEX Beacon D264-D13-001 ATEX 120/230 VAC Beacon www.dialight.com 2 Application: LED Based L810 Red Obstruction light certified to meet both the rigorous FAA requirements for red LED obstruction lights and Class I, Division 2 for hazardous area lighting locations. It is available in 120VAC or 230VAC versions and can be ordered as single or dual units. US Patent # 6,425,678 SafeSite® L-810 Red LED Obstruction Lights Mechanical Information: Shield Shield Lens Assembly 11.21 [284.6] REF Single Units: 14.77 [375.2] Lens 14.21Assembly 11.77 [298.9] REF [360.8] 16” X 9” X 8” 406mm x 229mm x 203mm Container Weight: 7.14 lbs (3.24 kg) Mounting: Threaded 1” NPT and 3/4” NPT bottom hub for mounting Dual Units: BI-DIRECTIONAL WIRE HOUSING 5.79 [147] REF Container Dimensions: Dual Wire Housing 15.54 [394.7] Container Dimensions: 22” X 17” X 9” 559mm x 432mm x 229mm Container Weight: 16.06 lbs (7.28 kg) Mounting: Threaded 1” NPT and 3/4” NPT bottom hub for mounting Dimensions in Inches [mm] Certifications & Ratings: w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated w ATEX certified, equipment group II (surface industries), category 3 (Zone 2), T4 rated w FAA AC No. 150/5345-43F w Compliant to: ICAO (Annex 14 - Fourth Edition, July 2004), DGAC Mexico w Canadian Aviation Regulation CAR 621.9(Transport Canada) w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div 2 hazardous locations w IP65 / IP66 / NEMA 4X rated Electrical specifications: (Per Light): Volt Amps: 44 VA (120 VAC Units) 67 VA (230 VAC Units) Input Power: 14.5 W (120 VAC Units) 16.0 W (230 VAC Units) Operating Temp: -67ºF to +131ºF (-55ºC to +55ºC) Material: Features & Benefits: w Uses 90% less energy than an incandescent w Weather/corrosion resistant lamp assembly and housing w Resistant to shock and vibration w Available as a single or dual unit w Unique optically designed lens to enhance LED operation and provide 360º visibility w Flash or steady burn w Will withstand wind in excess of 150 mph (240 kph), salt fog w 5 year warranty Housing: Cast aluminum Lens: Glass Accessories (Hardware): Stainless steel Order Codes: Class 1, Div 2 Units 860-2R01-001 860-2R02-001 860-2R01-002 860-2R02-002 ATEX Units Class I, Div 2 120 VAC, Single Unit Class I, Div 2 230 VAC, Single Unit Class I, Div 2 120 VAC, Dual Unit Class I, Div 2 230 VAC, Dual Unit 860-9R01-001 860-9R02-001 860-9R01-002 860-9R02-002 www.dialight.com ATEX 120 VAC, Single Unit ATEX 230 VAC, Single Unit ATEX 120 VAC, Dual Unit ATEX 230 VAC, Dual Unit 3 Application: Dialight's steady burn LED Based Class I, Division 2 Visual Signals are used in a wide range of industries for visual indication in hazardous environments. Versions of this fixture are available in 120VAC or 230VAC. US Patent # 6,425,678 SafeSite® 860 Series LED Steady Burn Visual Signal Lights Shield Mechanical Information: Single Units: Shield Lens Assembly 11.21 [284.6] REF Lens Assembly 14.21 [360.8] 14.77 [375.2] 11.77 [298.9] REF 16” X 9” X 8” 406mm x 229mm x 203mm Container Weight: 7.14 lbs (3.24 kg) Mounting: Threaded 1” NPT and 3/4” NPT bottom hub for mounting Dual Units: Container Dimensions: 22” X 17” X 9” 559mm x 432mm x 229mm Container Weight: 16.06 lbs (7.28 kg) Mounting: Threaded 1” NPT and 3/4” NPT bottom hub for mounting Dual Wire Housing BI-DIRECTIONAL WIRE HOUSING 5.79 [147] REF Container Dimensions: 15.54 [394.7] Dimensions in Inches [mm] Certifications & Ratings: w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated w ATEX certified, equipment group II (surface industries), category 3 (Zone 2), T4 rated w IP65 / IP66 / NEMA 4X rated w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div 2 hazardous locations Features & Benefits: w Uses 90% less energy than an incandescent w Weather/corrosion resistant lamp assembly and housing w Resistant to shock and vibration w Available as a single or dual unit w Unique optically designed lens to enhance LED operation and provide 360º visibility w 5 year warranty Electrical specifications: (Per Light): Volt Amps: 44 VA (120 VAC Units) 67 VA (230 VAC Units) Input Power: 14.5 W (120 VAC Units) 16.0 W (230 VAC Units) Operating Temp: -67ºF to +131ºF (-55ºC to +55ºC) Material: Housing: Cast aluminum Lens: Glass Accessories (Hardware): Stainless steel Order Codes: Class I, Div 2 - Single Units 860-2R01-001 860-2W01-001 860-2G01-001 860-2Y01-001 860-2B01-001 860-2R02-001 860-2W02-001 860-2G02-001 860-2Y02-001 860-2B02-001 Class I, Div 2 - Dual Units Class I, Div 2 Red 120 VAC Class I, Div 2 White 120 VAC Class I, Div 2 Green 120 VAC Class I, Div 2 Yellow 120 VAC Class I, Div 2 Blue 120 VAC Class I, Div 2 Red 230 VAC Class I, Div 2 White 230 VAC Class I, Div 2 Green 230 VAC Class I, Div 2 Yellow 230 VAC Class I, Div 2 Blue 230 VAC 860-2R01-002 860-2W01-002 860-2G01-002 860-2Y01-002 860-2B01-002 860-2R02-002 860-2W02-002 860-2G02-002 860-2Y02-002 860-2B02-002 Class I, Div 2 Red 120 VAC Class I, Div 2 White 120 VAC Class I, Div 2 Green 120 VAC Class I, Div 2 Yellow 120 VAC Class I, Div 2 Blue 120 VAC Class I, Div 2 Red 230 VAC Class I, Div 2 White 230 VAC Class I, Div 2 Green 230 VAC Class I, Div 2 Yellow 230 VAC Class I, Div 2 Blue 230 VAC ATEX versions available - consult factory www.dialight.com 4 Application: Dialight’s flat base junction box allows versatility of mounting and installation. It’s flat bottom base design creates the ability to mount the visual signal against level surfaces such as walls, ceilings and platforms. SafeSite® 860 Series LED Visual Signal Lights w/ Flat Base Junction Box Mechanical Information: Container Dimensions: 16” X 9” X 8” 406mm x 229mm x 203mm Container Weight: 7.14 lbs (3.24 kg) Mounting: Threaded 1” NPT on 4 sides and 1 on bottom Electrical specifications: 11.34 [288.2] Volt Amps: 44 VA (120 VAC Units) Input Power: 14.5 W (120 VAC Units) Operating Temp: -67ºF to +131ºF (-55ºC to +55ºC) Material: 2.25 [57.15] Ø 6.60 [167.6] Housing: Cast aluminum Lens: Glass Accessories (Hardware): Stainless steel Dimensions in Inches [mm] Certifications & Ratings: w Class I, Div 2, Groups A, B, C, D hazardous environments (pending) w IP65 / IP66 / NEMA 4X rated w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div 2 hazardous locations Features & Benefits: w Uses 90% less energy than an incandescent w Weather/corrosion resistant lamp assembly and housing w Resistant to shock and vibration w Unique optically designed lens to enhance LED operation and provide 360º visibility w 5 year warranty Order Codes: Class I, Div 2 - Single Units 860-2R01-005 Class I, Div 2 Red 120 VAC - Flat Base 860-2Y01-005 Class I, Div 2 Yellow 120 VAC - Flat Base 860-2B01-005 Class I, Div 2 Blue 120 VAC - Flat Base www.dialight.com 5 Application: US Patent # 6,425,678 Dialight's newest addition to their line of Class I, Division 2 Visual Signal Lights, the FLS Series Flashing Signals are used in a wide range of industries for visual indication in hazardous environments. Versions of this fixture are available in 120VAC or 230VAC. SafeSite® FLS Series LED Flashing Visual Signal Lights Shield Mechanical Information: Lens Assembly 11.21 [284.6] REF Container Dimensions: 16” X 9” X 8” 406mm x 229mm x 203mm 11.77 [298.9] REF BI-DIRECTIONAL WIRE HOUSING 5.79 [147] REF Container Weight: 7.14 lbs (3.24 kg) Mounting: Threaded 1” NPT and 3/4” NPT bottom hub for mounting Electrical specifications: Dimensions in Inches [mm] Certifications & Ratings: w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated w IP66 / NEMA 4X rated w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div 2 hazardous locations Volt Amps: 44 VA (120 VAC Units) 67 VA (230 VAC Units) Input Power: 14.5 W (120 VAC Units) 16.0 W (230 VAC Units) Operating Temp: -67ºF to +131ºF (-55ºC to +55ºC) Material: Features & Benefits: w Uses 90% less energy than an incandescent w Weather/corrosion resistant lamp assembly and housing w Resistant to shock and vibration w Available as a single unit w Unique optically designed lens to enhance LED operation and provide 360º visibility w 5 year warranty Housing: Cast aluminum Lens: Glass Accessories (Hardware): Stainless steel Order Codes: Class I, Div 2 - Single Units FLS-2R01-001 FLS-2W01-001 FLS-2G01-001 FLS-2Y01-001 FLS-2B01-001 FLS-2R02-001 FLS-2W02-001 FLS-2G02-001 FLS-2Y02-001 FLS-2B02-001 Class I, Div 2 Red 120 VAC Class I, Div 2 White 120 VAC Class I, Div 2 Green 120 VAC Class I, Div 2 Yellow 120 VAC Class I, Div 2 Blue 120 VAC Class I, Div 2 Red 230 VAC Class I, Div 2 White 230 VAC Class I, Div 2 Green 230 VAC Class I, Div 2 Yellow 230 VAC Class I, Div 2 Blue 230 VAC ATEX versions available - consult factory www.dialight.com 6 Application: Dialight’s flat base junction box allows versatility of mounting and installation. It’s flat bottom base design creates the ability to mount the flashing signal against level surfaces such as walls, ceilings and platforms. SafeSite® FLS Series LED Flashing Signal Lights w/ Flat Base Junction Box Mechanical Information: Container Dimensions: 16” X 9” X 8” 406mm x 229mm x 203mm Container Weight: 7.14 lbs (3.24 kg) Mounting: Threaded 1” NPT on 4 sides and 1 on bottom Electrical specifications: 11.34 [288.2] Volt Amps: 44 VA (120 VAC Units) Input Power: 14.5 W (120 VAC Units) Operating Temp: -67ºF to +131ºF (-55ºC to +55ºC) Material: 2.25 [57.15] Ø 6.60 [167.6] Dimensions in Inches [mm] Housing: Cast aluminum Lens: Glass Accessories (Hardware): Stainless steel Certifications & Ratings: w Class I, Div 2, Groups A, B, C, D hazardous environments (pending) w IP65 / IP66 / NEMA 4X rated Features & Benefits: w ETL Listed in compliance with UL1598 and UL844 for use in Class I, Div 2 hazardous locations w Uses 90% less energy than an incandescent w Weather/corrosion resistant lamp assembly and housing w Resistant to shock and vibration w Unique optically designed lens to enhance LED operation and provide 360º visibility w 5 year warranty Order Codes: Class I, Div 2 - Single Units FLS-2R01-005 Class I, Div 2 Red 120 VAC - Flat Base FLS-2Y01-005 Class I, Div 2 Yellow 120 VAC - Flat Base FLS-2B01-005 Class I, Div 2 Blue 120 VAC - Flat Base www.dialight.com 7 Application: Dialight's newest addition to their line of Class I, Division 2 Visual Signal Lights, the FLS Series Flashing Signals are used in a wide range of industries for visual indication in hazardous environments. The FLS series incorporates a 4 wire connection for incorporation into a DC supervised alarm systems. US Patent # 6,425,678 SafeSite® FLS Series LED Flashing Visual Signal Lights for Supervised Alarm Systems Mechanical Information: Container Dimensions: 16” X 9” X 8” 406mm x 229mm x 203mm Container Weight: 7.14 lbs (3.24 kg) Mounting: Threaded 1” NPT Electrical specifications: Certifications & Ratings: w Class I, Div 2, Groups A, B, C, D hazardous environments T4 rated w Certified to UL844 / UL1598A / DL1598 w IP66 / NEMA 4X rated Features & Benefits: w Uses 90% less energy than an incandescent w Weather/corrosion resistant lamp assembly and housing w Resistant to shock and vibration w Unique optically designed lens to enhance LED operation and provide 360º visibility w 5 year warranty Operating Voltage: 12-48 VDC (nom) Input Power: 1.5 W Operating Temp: -40°C to +65°C On:Off Time: 100:900ms Material: Housing: Powder coated cast aluminum Lens: Glass Hardware: Stainless steel Included Accessories: Threaded 3/4” NPT reducer Threaded 1” NPT plug Stainless steel cage Order Codes: Class I, Div 2 - Single Units FLS-2R09-001 FLS-2W09-001 FLS-2G09-001 FLS-2Y09-001 FLS-2B09-001 Red White Green Yellow Blue 11.18 [289.9] REF Ø5.79 [147.0] REF Dimensions in Inches [mm] Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: http://www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDTFSFSTBROCHURE.pdf MDTFSFSTBROCHURE_D www.dialight.com 8