MIL-DTL 5015 Type 947-042 MIL-DTL-5015 Type Hermetic Jam Nut Mount Bulkhead Feed-Through D Series Connector with Pin/Socket Contacts Series 947 MIL-DTL-5015 D Series Termination Type P = Pin on Jam-Nut Side, Socket Opposite S = Socket on Jam-Nut Side, Pin Opposite PP = Pin on Both Sides (See Note 2) Shell Size 947 - 042 - 36 - 12 Connector Style 042 = Jam-Nut Mount Hermetic Receptacle Insert Arrangement Per MIL-DTL-5015D P X Alternate Insert Arrangement W, X, Y, or Z (Omit for Normal) B 3.33 Hole For .031 Dia Safety Wire, 3 Equally Spaced See MIL-C-5015 D for Insert Arrangements .849 Max D C F A Thread - Typ .290 .250 1.375 Max Panel Accommodation APPLICATION NOTES 1. 2. Material/Finish: Jam-nut, hoods, lock-ring, shell* - Stainless steel/passivated. Contacts - Alloy 52/gold plated. Insulators - High-grade rigid dielectric, full glass or glass bead. O-Rings - Silicone/N.A. 3. Hermeticity - Less than 1 x 10-7 cc/sec at one atmosphere. Not for use in liquid atmosphere. Connector rated to 200° C and 1000 PSI max. 4. Outgas for space application. 5. For pin-to-pin, symmetrical layouts only. Power to a given contact on one end will result in power to contact directly opposite 6. regardless of identification letter. To be identified with manufacturer’s name, part number and date code, space permitting. Metric Dimensions (mm) are indicated in parentheses. * Additional shell materials available, including titanium and Inconel®. Consult factory for ordering information. © 2009 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-10 E-Mail: [email protected] MIL-DTL 5015 Type 947-042 MIL-DTL-5015 Type Hermetic Jam Nut Mount Bulkhead Feed-Through D Series Connector with Pin/Socket Contacts F HERMETIC LEAK RATE MOD CODES Designator E Required Leak Rate –585A 1 x 10-10 cc’s Helium per second –585B 1 x 10-9 cc’s Helium per second –585C 1 x 10-8 cc’s Helium per second RECOMMENDED PANEL CUT-OUT TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS Shell Size B Dia Max C Hex D Flats E Dia ± .005 (0.1) F + .005 -.000 (+0.1 - 0.0) 08 1/2-28 UNEF 1.000 (25.4) .688 (17.5) .875 (22.2) .510 (13.0) .460 (11.7) 10 5/8-24 UNEF 1.125 (28.6) .812 (20.6) 1.000 (25.4) .635 (16.1) .578 (14.7) 12 3/4-20 UNEF 1.250 (31.8) .938 (23.8) 1.125 (28.6) .760 (19.3) .692 (17.6) 14 7/8-20 UNEF 1.375 (34.9) 1.062 (27.0) 1.250 (31.8) .885 (22.5) .817 (20.8) 1-20 UNEF 1.500 (38.1) 1.250 (31.8) 1.375 (34.9) 1.010 (25.7) .942 (23.9) 1 1/8-18 UNEF 1.750 (44.5) 1.375 (34.9) 1.625 (41.3) 1.135 (28.8) 1.060 (26.9) 16 18 © 2009 Glenair, Inc. A Thread Class 2A 20 1 1/4-18 UNEF 1.875 (47.6) 1.500 (38.1) 1.750 (44.5) 1.260 (32.0) 1.185 (30.1) 22 1 3/8-18 UNEF 2.000 (50.8) 1.625 (41.3) 1.875 (47.6) 1.385 (35.2) 1.310 (33.3) 24 1 1/2-18 UNEF 2.188 (55.6) 1.750 (44.5) 2.000 (50.8) 1.510 (38.4) 1.435 (36.4) 28 1 3/4-18 UNEF 2.438 (61.9) 2.000 (50.8) 2.250 (57.2) 1.760 (44.7) 1.687 (42.8) 32 2-18 UNEF 2.688 (68.3) 2.250 (57.2) 2.500 (63.5) 2.010 (51.1) 1.937 (48.6) 36 2 1/4-18 UN 2.938 (74.6) 2.500 (63.5) 2.750 (69.9) 2.260 (57.4) 2.177 (55.3) CAGE CODE 06324 F Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-11 E-Mail: [email protected]