94SVP www.vishay.com Vishay OS-CON SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES • Vishay OS-CON series utilizes a polymerized organic semiconductor as electrolyte • Features superior heat-proof characteristics compared with previous OS-CON series • For power supply and other applications where high ripple current and low impedance are necessary • Rated ripple current values are guaranteed at 105 °C • No need to consider derating on maximum allowable ripple current • SMD version with base plate, containing no lead (Pb) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION Operating temperature range Capacitance tolerance at 120 Hz Tangent of loss angle (tan ) at 120 Hz Leakage current (μA/2 min) (or less) (1) Equivalent series resistance (), (100 kHz to 300 kHz) VALUE - 55 °C to + 105 °C M: ± 20 % Values in Electrical Data and Ordering Information table Values in Electrical Data and Ordering Information table Values in Electrical Data and Ordering Information table 0.75 to 1.25 - 55 °C Z/Z20 °C + 105 °C Z/Z20 °C 0.75 to 1.25 C/C Within ± 20 % tan 1.5 x the value of tangent of loss angle ESR 1.5 x the value of ESR Leakage current the value of leakage current C/C Within ± 20 % tan 1.5 x the value of tangent of loss angle ESR 1.5 x the value of ESR Leakage current the value of leakage current after voltage treatment Temporary: < 20 % of the rated voltage Continuous: < 10 % of the rated voltage Characteristics at high temp. and low temp. Impedance ratio at 100 kHz, + 20 °C Endurance + 105 °C, 2000 h Rated voltage applied (20 V for 25 V products) (1000 h for A5/B6 sizes) Damp heat (steady state) (+ 60 °C, 90 % to 95 % RH, 1000 h, no voltage) (500 h for A5/B6 sizes) Reverse voltage guarantee Solder heat resistance (VPS) (2) (230 °C x 75 s) (Please consult us for A5/B6 sizes) C/C Within ± 10 % tan 1.3 x the value of tangent of loss angle ESR 1.3 x the value of ESR Leakage current the value of leakage current after voltage treatment Notes (1) If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage treatment: The rated voltage is applied to Vishay OS-CON (2.5 WV to 20 WV) for 120 min at 105 °C. (However, 20 V is applied to a 25 WV Vishay OS-CON). (2) Refer to Soldering Profile and Land Pattern document www.vishay.com/doc?90014 for soldering recommendation. DIMENSIONS in millimeters SIZE CODE 0.2 max. W H ØD L Revision: 28-Aug-12 P R (+) C A5 B6 C6 E7 F8 E12 F12 ØD ± 0.5 4.0 5.0 6.3 8.0 10.0 8.0 10.0 L max. 5.5 6.0 6.0 7.0 8.0 12.0 12.7 W ± 0.2 4.3 5.3 6.6 8.3 10.3 8.3 10.3 H ± 0.2 4.3 5.3 6.6 8.3 10.3 8.3 10.3 C ± 0.2 5.0 6.0 7.3 9.0 11.0 9.0 11.0 R 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 P ± 0.2 1.0 1.4 2.1 3.2 4.6 3.2 4.6 Document Number: 90021 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 94SVP www.vishay.com Vishay OS-CON RECOMMENDED LAND PATTERN DIMENSIONS in millimeters SIZE CODE c a b c A5 1.0 6.2 1.6 B6 1.4 7.4 1.6 C6 2.1 9.1 1.6 a E7 2.8 11.1 1.9 b F8 4.3 13.1 1.9 E12 2.8 11.1 1.9 F12 4.3 13.1 1.9 CASE CODE LIST CAPACITANCE (μF) WV (1) (SV) (2) 2.5 4 6.3 10 16 20 25 (3.3) (5.2) (8.2) (11.5) (18.4) (23) (25) 3.3 - - - - A5 - - 4.7 - - - A5 - - - 6.8 - - - A5 - - C6 10.0 - - - A5 - B6 E7 15.0 - -vb - A5 B6 - - 22.0 - - A5 - B6 C6 F8 27.0 - - - - - C6 - 33.0 - A5 - B6 - E7 E12 39.0 - B6 - - C6 - - 47.0 - - B6 C6 - E7 - 56.0 - - - C6 E7 F8 F12 68.0 - B6 - - - F8 - 82.0 - - C6 - E7 - - 100.0 - - C6 - F8 E12 - 120.0 - - - E7 - - - 150.0 - C6 - E7, F8 F8 F12 - 180.0 - - - - E12 - - 220.0 - - E7, F8 - - - - 270.0 - - - F8 - - 330.0 - E7 F8 E12 F12 - - 470.0 - - F8, E12 - - - - 560.0 - E12 - F12 - - - 680.0 E12 F8 - - - - - 820.0 - - F12 - - - - 1200.0 - F12 - - - - - 1500.0 F12 - - - - - - Notes (1) WV = Rated Voltage. (2) (SV) = Surge Voltage (at room temperature). The description contents are subject to change due to technical improvement without notice. Please ask for latest specifications for order and use. Revision: 28-Aug-12 Document Number: 90021 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 94SVP www.vishay.com Vishay OS-CON ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 2.5 4 6.3 10 16 20 25 CR (μF) CASE CODE MAX. ESR (100 kHz to 300 kHz) (m) 680 1500 33 39 68 150 330 680 560 1200 22 47 82 100 220 220 330 470 470 820 4.7 6.8 10 15 33 47 56 120 150 150 270 330 560 3.3 15 22 39 56 82 100 150 180 330 10 22 27 33 47 56 68 100 150 6.8 10 22 33 56 E12 F12 A5 B6 B6 C6 E7 F8 E12 F12 A5 B6 C6 C6 E7 F8 F8 E12 F8 F12 A5 A5 A5 A5 B6 C6 C6 E7 E7 F8 F8 E12 F12 A5 B6 B6 C6 E7 E7 F8 F8 E12 F12 B6 C6 C6 E7 E7 F8 F8 E12 F12 C6 E7 F8 E12 F12 16 13 200 70 70 50 35 25 16 13 220 90 50 40 35 30 25 17 25 14 260 260 240 240 130 60 55 40 35 35 30 19 15 280 150 120 65 50 45 40 35 22 17 170 65 60 50 50 45 45 25 21 80 60 50 30 28 ALLOWABLE RIPPLE CURRENT AT 100 kHz, + 105 °C (mA) 4080 5230 740 1100 1100 1620 2560 3700 4080 5230 700 1060 1570 1810 2560 3020 3300 3960 3700 5040 660 660 670 700 990 1450 1510 2120 2560 2670 3020 3740 4870 590 920 980 1390 1800 1890 2400 2670 3480 4580 850 1390 1450 1700 1750 2200 2200 3260 4220 1200 1500 2000 2980 3800 MAX. TANGENT OF LOSS ANGLE 0.15 0.18 0.15 0.12 0.12 0.12 0.12 0.12 0.15 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.15 0.12 0.15 0.08 0.09 0.10 0.10 0.15 0.12 0.12 0.12 0.12 0.12 0.12 0.15 0.15 0.07 0.10 0.10 0.10 0.12 0.12 0.12 0.12 0.15 0.15 0.10 0.10 0.10 0.12 0.12 0.12 0.12 0.15 0.15 0.10 0.10 0.10 0.12 0.12 MAX. LEAKAGE CURRENT (μA) (after 2 min) 340 750 66.0 78 136 120 264 544 448 960 69.3 148 103 126 277 277 416 592 592 775 23.5 34.0 50.0 75.0 165 94 112 240 300 300 540 660 840 26.4 120 176 125 179 262 320 480 576 792 100 88 108 132 188 224 272 400 600 85 125 275 413 700 PART NUMBER (1) 94SVP687X02R5E12 94SVP158X02R5F12 94SVP336X0004A5 94SVP396X0004B6 94SVP686X0004B6 94SVP157X0004C6 94SVP337X0004E7 94SVP687X0004F8 94SVP567X0004E12 94SVP128X0004F12 94SVP226X06R3A5 94SVP476X06R3B6 94SVP826X06R3C6 94SVP107X06R3C6 94SVP227X06R3E7 94SVP227X06R3F8 94SVP337X06R3F8 94SVP477X06R3E12 94SVP477X06R3F8 94SVP827X06R3F12 94SVP475X0010A5 94SVP685X0010A5 94SVP106X0010A5 94SVP156X0010A5 94SVP336X0010B6 94SVP476X0010C6 94SVP566X0010C6 94SVP127X0010E7 94SVP157X0010E7 94SVP157X0010F8 94SVP277X0010F8 94SVP337X0010E12 94SVP567X0010F12 94SVP335X0016A5 94SVP156X0016B6 94SVP226X0016B6 94SVP396X0016C6 94SVP566X0016E7 94SVP826X0016E7 94SVP107X0016F8 94SVP157X0016F8 94SVP187X0016E12 94SVP337X0016F12 94SVP106X0020B6 94SVP226X0020C6 94SVP276X0020C6 94SVP336X0020E7 94SVP476X0020E7 94SVP566X0020F8 94SVP686X0020F8 94SVP107X0020E12 94SVP157X0020F12 94SVP685X0025C6 94SVP106X0025E7 94SVP226X0025F8 94SVP336X0025E12 94SVP566X0025F12 Note (1) Part numbers shown are for ± 20 % capacitance tolerance (X0). Revision: 28-Aug-12 Document Number: 90021 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000