ID2016 v3.00 OSMT ™ Interconnect System Surface Mount Coaxial Connectors M/A-COM's OSMT Interconnect System is designed to meet the growing demand for surface mount RF connector technology. The OSMT occupies less printed circuit board (PCB) real estate than conventional through hole coaxial connectors. An innovative microstrip mounting pattern and plug receptacle design ensure reliable grounding and PCB retention characteristics. The OSMT Interconnect System also allows closer PCB pitch/spacing, standing a mere 4.2mm (fully mated height) off the board. A new higher cable retention plug receptacle has been added to the OSMT product family. This new design addresses applications where force is applied to the mated connector interface as a result of cable flexure between boards or around other PCB components. These enhancements and features have been built into the OSMT design to provide the performance of much larger industry standard connectors. The OSMT Interconnect System consistently achieves broad band electrical performance through 6 GHz with a maximum VSWR of 1.20:1 at 2 GHz and 1.40:1 at 6 GHz. This broad band performance establishes a reliable interface that can be utilized for future system upgrades without concerns for performance degradation. The OSMT plug receptacle is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for automated pick and place board assembly. The mating cable jack is available terminated to a specially designed coax cable as either a pigtail, jumper or standard interseries connector assembly to meet your needs. Specially designed engage/disengage tooling is available to ensure proper alignment of the OSMT interface during assembly. The new higher retention plug receptacle can be hand engaged as a result of a unique lead-in chamfer design which also aligns the contacts prior to mating to ensure mechanical integrity. Interface durability is rated at 100 mating cycles. M/A-COM's OSMT Interconnect System is ideal for surface mount applications in telecommunications, GPS, consumer and automotive electronics. The OSMT provides versatile RF solutions for next generation interconnect needs. Please call your local Sales or Distribution office for additional information and qualification samples today. High Retention Design 360° CABLE ROTATION 4.2 (.165) MAX MATED PROFILE SLOTTED CABLE ENTRY 4.2 (.165) MAX MATED PROFILE OSMT RIGHT ANGLE JACK 5.3 (.208) MIN CLEARANCE FOR DISENGAGEMENT Part Number OSMT RIGHT ANGLE JACK 6.2 (.245) MIN CLEARANCE FOR DISENGAGEMENT OSMT PLUG 2367- 0000- 54 OSMT PLUG Part Number 2367- 5006- 54 Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Specifications Requirement Detail General Materials OSMT Plug OSMT Cable Jack Finish Housing: Contacts: Polyphenylene Sulfide Copper alloy Outer Contact: Inner Contact: Dielectric: Beryllium Copper Beryllium Copper Polypropylene, GF Plug and cable jack - Contacts: Gold plate over nickel plate Electrical Frequency dc - 6 GHz Nominal Impedance 50 ohms Voltage Rating 250 Volts (VRMS Maximum) @ Sea Level VSWR (Mated Connectors Only) 1.20:1 Maximum @ 2 GHz 1.40:1 Maximum @ 6 GHz Insulation Resistance 1000 Megohms Minimum Dielectric Withstanding Voltage 500 Volts (VRMS Minimum) @ Sea Level Contact Resistance (Connectors Only) Center Contact Outer Contact Insertion Loss (Connectors Only) 15 milliohms Maximum 10 milliohms Maximum .15dB Max. @ 6 GHz Mechanical Connector Durability Tape/Reel Packaging (Plug) Force to Engage Force to Disengage 100 mating cycles 12mm per EIA-481 4.0 lbs. Max. (2.5 lbs. typ.) 4.5 lbs. Max. (3.0 lbs. typ.) Environmental Temperature Rating (Mated Pair) PVC Flexible Cable: FEP Flexible Cable: -40°C (-40°F) to +105°C (221°F) -40°C (-40°F) to +125°C (257°F) Resistance to Solder Heat Infrared, convection and vapor phase solderable (plug only). Maximum reflow time/temperature not to exceed 260°C for 3 minutes. Cable Specifications1 Materials Jacket: Shield: PVC Flexible Cable (105°C) Polyvinyl Chloride Silver Plated Copper Wire, 38 AWG, 90% Min. Coverage PFA or FEP Silver Plated Copper Clad Steel, 30 AWG FEP Flexible Cable (200°C) Flourinated Ethylene Propylene Silver Plated Copper Wire, 38 AWG, 90% Min. Coverage PFA or FEP Silver Plated Copper Clad Steel, 30 AWG Minimum Bend Radius 9.5mm (.375 inch) 9.5mm (.375 inch) Insertion Loss (PVC and FEP Cable Only) 0.4 dB/ft., 1.3d B/m @ 500 MHz 0.6 dB/ft., 2.0 dB/m @ 1 GHz 0.9 dB/ft., 3.0 dB/m @ 2 GHz 1.3 dB/ft., 4.3 dB/m @ 4 GHz 1.7 dB/ft., 5.6 dB/m @ 6 GHz Center Conductor Resistance (PVC and FEP Cable Only) .26 Ohms per foot average. Dielectric: Center Conductor: .73 mm (.028) DIA. 1.9 mm (.075) DIA. OUTER JACKET .254 mm (.010) DIA. REF CENTER CONDUCTOR DIELECTRIC SHIELD (BRAID) 1. M/A-COM has design control and all data contained herein is subject to change without notice. Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. 2 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Surface Mount Coaxial Connectors Straight SMT PCB Mount Plug Receptacles Part Number Multi-directional cable entry, 360° rotation. Recommended for use in passive cable applications or with supplementary cable tie-downs. GROUND TERMINAL (3 PLCS) 4.5 (.177) CENTER CONTACT (PIN) 4.0 (.157) 4.0 (.157) REF. 2.1 (.081) Packaging 2367-0000-54 Bulk Quantity customer specified 2367-5001-54 178mm (7.0 inches) Dia. Taping 800 pcs/reel 2367-5002-54 330mm (13.3 inches) Dia. Taping 3000 pcs/reel 1. Requires part number 2598-5342-54 Engagement/Disengagement Tool. 1.24 (0.049) 4.5 (.177) 4.5 (.177) REF. 0.4 (0.15) 5.0 (.197) 1.0 (.039) 4 PLACES CENTER CONTACT TERMINAL OUTER CONTACT 0.5 (.020) 4 PLACES 0.6 (.024) P/O CENTER CONTACT REF. 3.0 (.118) Slotted single direction cable entry. Recommended for use in applications where bending forces may be applied to the cable. GROUND TERMINAL (3 PLCS) 4.5 (.177) 4.0 (.157) REF. CENTER CONTACT (PIN) 3.0mm (.118) 4.0 (.157) 1.24 (0.049) 4.5 5.0 (.177) (.197) 4.5 (.177) REF. CENTER CONTACT TERMINAL 0.76 (.030) 1.0 (.039) 4 PLCS 0.4 (.015) OUTER CONTACT 5 0.5 (.020) 0) 4 PLCS CES 0.6 (.025) 3.0 (.118) Part Number Packaging Quantity 2367-5006-54 Bulk customer specified 2367-5015-54 178mm (7.0 inches) Dia. Taping 600 pcs/reel 2367-5016-54 330mm (13.3 inches) Dia. Taping 2500 pcs/reel 1. Requires part number 2598-5401-54 Disengagement Tool. Engagement requires no tooling. P/O CENTER CONTACT REF. Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 3 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Surface Mount Coaxial Connectors Right Angle Jack to Jack Cable Assembly 180° Offset Part Number1 PVC Flexible FEP Flexible Cable (105°C) Cable (200°C) 2.8 (.110) DIA REF (2 PLACES) 9950-3100-23 9950-3200-23 9950-3305-23 3.1 (.122) REF. OSMT JACK2 (2 PLACES) 9952-3100-23 9952-3200-23 9952-3305-23 Cable Length 3 mm (Inches) 100 200 305 (4) (8) (12) 1. Consult factory for non-standard cable lengths. 2. Connector centerlines align 180° ± 30° as shown. 3. Cable length tolerance: 50-2000mm: ± (2mm +1% of cable length) CABLE LENGTH1 CENTERLINE TO CENTERLINE Inter-Series Cable Assemblies CONNECTOR (SEE TABLE BELOW) OSMT JACK CABLE LENGTH LENGTH23 CABLE CENTERLINE TO CENTERLINE CENTERLINE Description -XX 1 SMA Straight Plug (Male) Crimp to OSMT Right Angle Jack 01 SMA Straight Jack (Female) Crimp to OSMT Right Angle Jack 02 SMA Bulkhead Feedthrough Jack (Female) Crimp to OSMT Right Angle Jack 03 SMA Flange Mount Jack (Female) Crimp to OSMT Right Angle Jack 04 SMB Straight Jack (Male) Clamp to OSMT Right Angle Jack 05 SMB Straight Jack (Male) Crimp to OSMT Right Angle Jack 06 SMB Straight Plug (Female) Clamp to OSMT Right Angle Jack 07 SMB Straight Plug (Female) Crimp to OSMT Right Angle Jack 08 SMB Bulkhead Feedthrough Jack (Male) Clamp to OSMT Right Angle Jack 09 SMB Bulkhead Feedthrough Jack (Male) Crimp to OSMT Right Angle Jack 10 Part Number1 PVC Flexible FEP Flexible Cable (105°C) Cable (200°C) Cable Length 2 mm (Inches) 9950-4100-XX 9950-4200-XX 9950-4305-XX 100 200 305 9952-4100-XX 9952-4200-XX 9952-4305-XX (4) (8) (12) 1. To order, replace XX in part number with appropriate digits from table indicating connector choice. 2. Connectors are randomly aligned. 3. Consult factory for non-standard cable lengths. Cable length tolerance: 50-2000mm: ± (2mm +1% of cable length) Description -XX 1 SMC Straight Plug (Female) Clamp to OSMT Right Angle Jack 11 SMC Straight Plug (Female) Crimp to OSMT Right Angle Jack 12 SMC Bulkhead Feedthrough Jack (Male) Clamp to OSMT Right Angle Jack 13 SMC Bulkhead Feedthrough Jack (Male) Crimp to OSMT Right Angle Jack 14 OSX Straight Plug (Male) Crimp to OSMT Right Angle Jack 15 OSX Right Angle Plug (Male) Crimp to OSMT Right Angle Jack 16 BNC Straight Plug (Male) Crimp to OSMT Right Angle Jack 17 TNC Straight Plug (Male) Crimp to OSMT Right Angle Jack 18 TNC Bulkhead Feedthrough Jack (Female) Crimp to OSMT Right Angle Jack 19 Finish: SMA. Passivated stainless steel; SMB and SMC, gold plate; OSX, TNC and BNC; nickel plate. Connectors listed above are standard M/A-COM products and have not been impedance matched to the OSMT cable. Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 4 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Surface Mount Coaxial Connectors Recommended Mounting Pattern for Microstrip Line 5.3 (.207) 0.5 (.020) VIA 3 PLCS 2.9 (.113) (SEE NOTE 2) 0.6 (.024) 1.2 (.047) 1.2 (.047 ) 1.2 (.047) 2. These dimensions valid for 1.6 (.062) board thickness. 1.6 (.064) (SEE NOTE 2) 9.0 (.354) 7.0 (.274) 6.0 (.236) Notes: 1. Printed wiring board material: glass epoxy FR-4 or similar, relative permit tivity: 4.8, 1 oz. copper clad both sides. 3. Decimal inch equivalent (to the nearest 0.001 inch) are shown in parentheses for general information only. 3.0 (.118) 4. Mounting pattern is utilized for both plug receptacles. 1 OZ (.0014) COPPER 1.2 (.047 ) 0.5 (.019 ) AREA FREE OF SOLDER MASK 3.3 (.128 ) 3.3 (.128 ) Right Angle Jack to Jack Cable Assembly CABLE LENGTH1 CENTERLINE TO CENTERLINE 3.1 (.122) REF. 2.8 (.110) DIA REF (2 PLACES) OSMT JACK2 (2 PLACES) Part Number PVC Flexible FEP Flexible Cable (105°C) Cable (200°C) Cable Length1 mm (Inches) 9950-1100-23 9952-1100-23 100 (4) 9950-1200-23 9952-1200-23 200 (8) 9950-1305-23 9952-1305-23 305 (12) 1. Consult factory for non-standard cable lengths. Cable length tolerance: 50-2000mm: ± (2mm +1% of cable length) 2. Connector centerlines align ±30° as shown for lengths of 165mm (6.5 in.) or less. Cable assemblies over 165mm (6.5 in.) have randomly aligned connectors. Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. 5 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Connectors and Tools Right Angle Jack Cable Pigtail Part Number PVC Flexible FEP Flexible Cable (105°C) Cable (200°C) OSMT JACK 9950-2100-23 9950-2200-23 9950-2305-23 CABLE LENGTH1 9952-2100-23 9952-2200-23 9952-2305-23 Cable Length1 mm (Inches) 100 200 305 (4) (8) (12) 1. Consult factory for non-standard cable lengths. Cable length tolerance: 50-2000mm: ± (2mm +1% of cable length) Note: To avoid damaging the cable, minimize time at temperature while soldering and/or heat shrinking connector to the cable. SMA Straight Plug (Male) to OSMT Right Angle Jack Recommended for Customer System Verification OSMT JACK SMA PLUG Part Number PVC Flexible Cable Cable Length1 9950-4200-01 200mm (8 in.) CABLE LENGTH1 CENTERLINE TO REFERENCE PLANE Finish: SMA, Passivated stainless steel body and gold plated center contact. Engagement/Disengagement Tool Part Number 6.4 (.250) 2598-5342-54 See Application Notes for instructions. For use with 2637-0000-54 101.6 (4.00) Disengagement Tool Part Number 2598-5401-54 See Application Notes for instructions. For use with 2637-5006-54 6.4 (.250) 9.5 (.375) REF Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 6 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Adapters OSMT Plug to SMA Jack Adapter OSMT Plug to SMA Plug Adapter 5.5 (.218) ACROSS FLATS OSM (SMA) JACK 13.7 (.538) REF. SSMT PLUG OSM (SMA) PLUG SSMT PLUG 10.5 (.413) REF. Part Number Part Number 2382-2240-00 OSMT Jack to SMA Jack Adapter OSMT Jack to SMA Plug 5.5 (.218) ACROSS FLATS OSM (SMA) JACK 2381-2241-00 16.2 (.639) REF. SSMT JACK OSM (SMA) PLUG SSMT JACK 12.9 (.508) REF. Part Number 2380-2240-00 Part Number 2382-2241-00 Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. 7 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Application Notes Packaging ■ Bulk Packed or Packaged in Plastic Carrier Tape on a Reel ■ Available on 178mm/800 pc or 300mm/3000 pc Plastic Reel ■ Sealed Plastic Carrier Tape in Accordance with EIA-481-1 ■ Conductive Anti-static Tape Material To Prevent Static Charge Entry to Electronic Assembly or Equipment Recommended Storage Temperature of Plastic Carrier Tape: 40°C (140°F), 50% Relative Humidity Max. ■ CENTER CONTACT TERMINAL REF. 1.50 DIA. .059 4.00 (.157) 8.00 .157 2.00 .157 1.75 .157 0.40 MAX .016 5.50 .157 12.0 .472 COVER TAPE REF. (.01 MAX. THK.) 7.39 .290 REF 3.00 MAX .118 REF. EMBOSSED CARRIER TAPE REF. SMT PLUG 2367-0000-54 Figure 1 OSMT Surface Mount Plug Receptacle Tape Package Detail Dimensions and Orientation Automatic Placement The OSMT surface mount plug receptacle is compatible with automatic placement equipment utilizing pneumatic (vacuum) part pick-up. Vacuum nozzle configuration can vary. Typical configurations follow: 2.0 .080 DIA. 2.0 .080 DIA. 2.0 DIA. .080 4.0 .158 4.5 .177 1.0 REF I.D. .039 4.0 DIA. .158 1.8 OR 2.5 O.D. .070 .098 4.0 .158 DIA. SMT PLUG REF External Pickup Internal Pickup Figure 2 Typical Pneumatic Nozzle Nozzle vacuum should be 15-30 inch Hg. Component placement pressure should not exceed 400g. Internal pick-up recommended for use with plug receptacle 2367-5006-54 Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 8 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Application Notes Automatic Placement cont’d. Alignment/centering grippers should contact sides of plug above contact leads as shown below: Figure 3 Typical Alignment/Centering Grippers Alignment/centering gripper pressure should not exceed 400g. Soldering OSMT plug receptacles are designed for reflow soldering processes, however excellent results can still be achieved using manual soldering. Flow (wave) soldering is not appropriate for this device. The type of solder paste selected for reflow soldering is generally a function of many factors relative to the overall system (PWA*) design. Most applications will use common electronic grade solders such as: 63/37, 60/40 or 62/36/2 with mild rosin/resin fluxes. Metal content of the paste for screen and/or stencil applications is generally 85-90% by weight, slightly lower for nozzel dispensing applications. When screening or stenciling, solder paste thickness of .15mm (.006 inch) to .25mm (.010 inch) is recommended. OSMT plug receptacles can be reflow soldered using infrared (IR), convection or vapor phase (VP) heating equipment. It is recommended that peak reflow temperature be approximately 10-30°C (20-55°F) above solder liquidus temperature. Typical reflow temperature profiles are shown below: TEMP °C REFLOW 20 - 40 SEC AT 235°C TYP. 240 - 250°C MAX 250 200 150 100 50 PREHEAT SOLDER FLUX MELT/ACTIVATION PASTE SOLDER SPHERE MELT BEGINS CURE 60 - 90 SEC AT 100 - 200°C 30-60 SEC 50-100°C AMBIENT OR FORCED COOL DOWN Figure 4 Typical Infrared and Convection Heating/Soldering Profile * Printed Wiring Assembly Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. 9 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Application Notes Soldering cont’d. TEMP °C 250 REFLOW 20 - 90 SEC AT 215°C 200 150 100 50 10 - 30 MIN AT 80 - 130°C PREHEAT 30 - 180 SEC AT 110 - 150°C AMBIENT OR FORCED COOL DOWN Figure 5 Typical Vapor Phase Heating/Soldering Profile Post-Solder Cleaning A 15-40 watt max. fine point tip soldering iron is recommended for manual soldering. Soldering iron tip temperature should not exceed 350-370°C. Lengthy application of heat and/or direct contact of the iron tip with the plastic housing should be avoided. The flux core solder (i.e.; 63/37 RMA, 62/36/2 RMA) is recommended. The center contact pad reflows easiest because of relatively low thermal mass, therefore, the center contact lead should be soldered first to minimize connector ”skating“. OSMT plug receptacles can withstand most electronics grade cleaning agents including: high temperature water/aqueous cleaners, ethanol, methanol, MEK, acetone, 1,1,1-tricloroethane, trichlordethylene, perchloroethylene, chlorofloro-carbon (CFC) solvents, isopropanol, dichlorofluoroethane, and blends. The OSMT cable jacket can also withstand mild exposure to the above listed cleaning agents. Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 10 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 OSMT Application Notes Engagement/Disengagement Tool Part Number 2598-5342-54 SLIDE HORIZONTAL TO ENGAGE TOOL LIFT VERTICAL TO DISENGAGE CONNECTOR PRESS VERTICAL TO ENGAGE CONNECTOR Note: Use Engagement/Disengagement Tool during mating to assure proper plug to jack alignment. Figure 6 Use of Engagement/Disengagement Tool Disengagement Tool Part Number 2598-5401-54 OSMT PCB MOUNT PLUG RECEPTACLE SLOT CABLE ATTACHMENT AREA ON OSMT RIGHT ANGLE JACK CABLE ASSEMBLY SLOT ON OSMT PCB MOUNT PLUG RECEPTACLE Instructions: 1. Slide slot in disengagement tool onto cable attachment area of OSMT cable assembly as shown. 2. Pull disengagement tool in a vertical direction until OSMT right angle jack releases from the OSMT plug receptacle. Note: After manual engagement, insure the right angle cable jack is fully bottomed by applying light pressure to the top surface. Figure 7 Use of Disengagement Tool Decimal inch equivalents are shown in parentheses for general information only. Specifications Subject to Change Without Notice. M/A-COM, Inc. 11 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +85 2 2375 0618 Fax +85 2 2375 0350 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 Sales Offices / Representatives AMERICAS Atlanta Tel: 800.366.2266 Austin Tel: 800.366.2266 Baltimore Tel: 800.366.2266 Boston Tel: 800.366.2266 Cedar Rapids Seltec Sales Tel: 800.366.2266 Chicago Tel: 800.366.2266 Dallas Tel: 800.366.2266 Dayton Tel: 800.366.2266 Denver Tel: 800.366.2266 Fort Wayne Tel: 800.366.2266 Kansas City Tel: 800.366.2266 Los Angeles Tel: 800.366.2266 New York, Metro ERA Tel: 800.366.2266 Orange County Tel: 800.366.2266 EUROPE/MIDDLE EAST/AFRICA Philadelphia Tel: 800.366.2266 Phoenix Tel: 800.366.2266 Raleigh/Durham Tel: 800.366.2266 San Diego Tel: 800.366.2266 San Jose Tel: 800.366.2266 Seattle Tel: 800.366.2266 St. Louis Tel: 800.366.2266 Florida Precision Marketing Tel: 800.366.2266 Argentina Reycom Electronica SRL Tel: 54.1.300.2013 Brazil Hi-Tech Commercial Tel: 55.11.882.4000 Canada Tel: 800.366.2266 Mexico Mexitek, S.A. Tel: 52.5.575.9929 Tel: 44.1344.869.595 Fax: 44.1344.300.020 Belgium Microwave & RF Consultants Tel: 32.2.230.5705 Greece Peter Caritato & Associates Tel: 30.1.9020115 Italy (Milan) Tel: 39.2.6696368 Spain Amitron-Arrow S.A. Tel: 34.1.3043040 Denmark BFI IBEXSA Denmark A/S Tel: 45.46.75.3131 Hungary TKI Tel: 36.1.251.0888 (Rome) Tel: 39.6.4191955 Sweden Tel: 468.580.83385 Finland Tel: 358.95123.4237 India Radelcom Tel: 91.80.558.5432 Netherlands Hi-Tech Electronic Components Tel: 31.3465.66024 Switzerland Walter Electronic AG Tel: 41.71.969.4343 Poland Micro Active Components SC Tel: 48.22.659.6174 Turkey Elektro Tel: 90.216.4181270 South Africa D.S. Electronics Tel: 27.o11.805.1878 United Kingdom Tel: 44.1344.869 595 France Tel: 33.1.3465.3737 Israel Tel: 972.3.7518421 Germany Tel: 49.89.462.3410 ASIA/PACIFIC Tel: 85.2.2375.0618 Fax: 85.2.2375.0350 Australia MAA Pty. Ltd. Tel: 61.47.516199 Hong Kong Gentech Industries Ltd. Tel: 852.2521.4567 Korea Hanaro Corporation Tel: 82.2.516.1144 Singapore/Malaysia/Thailand Excel-Max Communications Tel: 65.243.3266 China Wellink Communications Ltd. Tel: 852.2884.4128 Japan (Tokyo) Tel: 81.3.3263.8761 New Zealand Comp & Inst., NZ Ltd. Tel: 64.3.366.9900 Taiwan Evergo Corporation Tel: 886.2.715.0283 Gentech Industries Ltd. Tel: 852. 2521.4567 (Osaka) Tel: 81.6.423.4351 Many M/A-COM products are available through distribution. For a complete, worldwide list of M/A-COM distributors by return fax, call our FaxFacts system from your fax machine at 508.442.4222 and request document 4. ©1997 M/A-COM, Inc.