C0G (NP0) Dielectric General Specifications C0G (NP0) is the most popular formulation of the “temperature-compensating,” EIA Class I ceramic materials. Modern C0G (NP0) formulations contain neodymium, samarium and other rare earth oxides. C0G (NP0) ceramics offer one of the most stable capacitor dielectrics available. Capacitance change with temperature is 0 ±30ppm/°C which is less than ±0.3% ⌬C from -55°C to +125°C. Capacitance drift or hysteresis for C0G (NP0) ceramics is negligible at less than ±0.05% versus up to ±2% for films. Typical capacitance change with life is less than ±0.1% for C0G (NP0), one-fifth that shown by most other dielectrics. C0G (NP0) formulations show no aging characteristics. PART NUMBER (see page 2 for complete part number explanation) 0805 5 A 101 J Size (L" x W") Voltage 6.3V = 6 10V = Z 16V = Y 25V = 3 50V = 5 100V = 1 200V = 2 500V = 7 Dielectric C0G (NP0) = A Capacitance Code (In pF) 2 Sig. Digits + Number of Zeros B C D F G J K = = = = = = = A Capacitance Tolerance ±.10 pF (<10pF) ±.25 pF (<10pF) ±.50 pF (<10pF) ±1% (≥ 10 pF) ±2% (≥ 10 pF) ±5% ±10% Failure Rate A = Not Applicable T 2 A Terminations Packaging 2 = 7" Reel T = Plated Ni 4 = 13" Reel and Sn 7 = Gold Plated 7 = Bulk Cass. 9 = Bulk Special Code A = Std. Product Contact Contact Factory For Factory 1 = Pd/Ag Term For Multiples ⌬ Capacitance vs. Frequency +2 Typical Capacitance Change Envelope: 0 ± 30 ppm/°C % ⌬ Capacitance +0.5 0 -0.5 +1 0 -1 -2 1KHz -55 -35 -15 +5 +25 +45 +65 +85 +105 +125 Temperature °C 10 KHz 100 KHz 100 0 0 20 40 60 80 100 Temperature °C Variation of Impedance with Chip Size Impedance vs. Frequency 1000 pF - C0G (NP0) 100,000 Variation of Impedance with Ceramic Formulation Impedance vs. Frequency 1000 pF - C0G (NP0) vs X7R 0805 10 100 10 pF 10.0 1.0 100 pF 1000 pF 0.1 1 10 100 Frequency, MHz 1000 Impedance, ⍀ 1,000 10.00 1206 0805 1812 1210 10,000 Impedance, ⍀ 10 MHz 1,000 Frequency Variation of Impedance with Cap Value Impedance vs. Frequency 0805 - C0G (NP0) 10 pF vs. 100 pF vs. 1000 pF 4 1 MHz Insulation Resistance vs Temperature 10,000 X7R NPO Impedance, ⍀ % ⌬ Capacitance Temperature Coefficient Insulation Resistance (Ohm-Farads) NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers. Contact factory for non-specified capacitance values. 1.0 0.1 10 100 Frequency, MHz 1000 1.00 0.10 0.01 10 100 Frequency, MHz 1000 C0G (NP0) Dielectric Specifications and Test Methods Parameter/Test Operating Temperature Range Capacitance Insulation Resistance NP0 Specification Limits -55ºC to +125ºC Within specified tolerance <30 pF: Q≥ 400+20 x Cap Value ≥30 pF: Q≥ 1000 100,000MΩ or 1000MΩ - μF, whichever is less Dielectric Strength No breakdown or visual defects Q Resistance to Flexure Stresses Appearance Capacitance Variation ±5% or ±.5 pF, whichever is greater Q Meets Initial Values (As Above) Insulation Resistance Solderability Appearance Capacitance Variation Resistance to Solder Heat Thermal Shock Load Life Q Insulation Resistance Dielectric Strength Appearance Capacitance Variation Q Insulation Resistance Dielectric Strength Appearance Capacitance Variation Q (C=Nominal Cap) Insulation Resistance Dielectric Strength Appearance Capacitance Variation Load Humidity Q Insulation Resistance Dielectric Strength No defects Measuring Conditions Temperature Cycle Chamber Freq.: 1.0 MHz ± 10% for cap ≤ 1000 pF 1.0 kHz ± 10% for cap > 1000 pF Voltage: 1.0Vrms ± .2V Charge device with rated voltage for 60 ± 5 secs @ room temp/humidity Charge device with 300% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max) Note: Charge device with 150% of rated voltage for 500V devices. Deflection: 2mm Test Time: 30 seconds 1mm/sec ≥ Initial Value x 0.3 ≥ 95% of each terminal should be covered with fresh solder No defects, <25% leaching of either end terminal 90 mm Dip device in eutectic solder at 230 ± 5ºC for 5.0 ± 0.5 seconds ≤ ±2.5% or ±.25 pF, whichever is greater Meets Initial Values (As Above) Dip device in eutectic solder at 260ºC for 60 seconds. Store at room temperature for 24 ± 2 hours before measuring electrical properties. Meets Initial Values (As Above) Meets Initial Values (As Above) No visual defects Step 1: -55ºC ± 2º 30 ± 3 minutes ≤ ±2.5% or ±.25 pF, whichever is greater Step 2: Room Temp ≤ 3 minutes Meets Initial Values (As Above) Step 3: +125ºC ± 2º 30 ± 3 minutes Meets Initial Values (As Above) Step 4: Room Temp ≤ 3 minutes Meets Initial Values (As Above) Repeat for 5 cycles and measure after 24 hours at room temperature No visual defects ≤ ±3.0% or ± .3 pF, whichever is greater ≥ 30 pF: ≥10 pF, <30 pF: <10 pF: Q≥ 350 Q≥ 275 +5C/2 Q≥ 200 +10C ≥ Initial Value x 0.3 (See Above) Meets Initial Values (As Above) Charge device with twice rated voltage in test chamber set at 125ºC ± 2ºC for 1000 hours (+48, -0). Remove from test chamber and stabilize at room temperature for 24 hours before measuring. No visual defects ≤ ±5.0% or ± .5 pF, whichever is greater ≥ 30 pF: ≥10 pF, <30 pF: <10 pF: Q≥ 350 Q≥ 275 +5C/2 Q≥ 200 +10C ≥ Initial Value x 0.3 (See Above) Meets Initial Values (As Above) Store in a test chamber set at 85ºC ± 2ºC/ 85% ± 5% relative humidity for 1000 hours (+48, -0) with rated voltage applied. Remove from chamber and stabilize at room temperature for 24 ± 2 hours before measuring. 5 C0G (NP0) Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE 0201 0402 0603 0805 1206 Soldering Packaging Reflow Only All Paper Reflow/Wave All Paper Reflow/Wave All Paper Reflow/Wave Paper/Embossed Reflow/Wave Paper/Embossed 0.60 ± 0.03 (0.024 ± 0.001) 0.30 ± 0.03 (0.011 ± 0.001) 0.15 ± 0.05 (0.006 ± 0.002) 25 50 A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A 1.00 ± 0.10 (0.040 ± 0.004) 0.50 ± 0.10 (0.020 ± 0.004) 0.25 ± 0.15 (0.010 ± 0.006) 25 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C 1.60 ± 0.15 (0.063 ± 0.006) 0.81 ± 0.15 (0.032 ± 0.006) 0.35 ± 0.15 (0.014 ± 0.006) 25 50 G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G 2.01 ± 0.20 (0.079 ± 0.008) 1.25 ± 0.20 (0.049 ± 0.008) 0.50 ± 0.25 (0.020 ± 0.010) 50 100 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J N N 6 A 0.33 (0.013) 䉲 Letter Max. Thickness L 50 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C W 16 G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G 䉲 䉲 SIZE 䉲 Cap (μF) 16 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C 100 G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G 16 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 25 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 100 16 25 200 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M M M M M 16 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M M M 25 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M M M 200 16 25 䉲 Cap (pF) 䉲 (t) Terminal 3.20 ± 0.20 (0.126 ± 0.008) 1.60 ± 0.20 (0.063 ± 0.008) 0.50 ± 0.25 (0.020 ± 0.010) 50 100 200 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M J J Q J J Q J M Q M M M P M P M P M P M P M 500 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M M M M M M P T 䉲 (W) Width mm (in.) mm (in.) mm (in.) WVDC 0.5 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.068 0.082 0.1 WVDC 䉲 (L) Length 25 50 16 0201 C 0.56 (0.022) t 25 50 16 0402 E 0.71 (0.028) PAPER G 0.90 (0.035) 25 50 0603 J 0.94 (0.037) K 1.02 (0.040) 50 100 0805 M 1.27 (0.050) N 1.40 (0.055) P Q 1.52 1.78 (0.060) (0.070) EMBOSSED 50 100 1206 X 2.29 (0.090) Y 2.54 (0.100) Z 2.79 (0.110) 200 500 C0G (NP0) Dielectric Capacitance Range PREFERRED SIZES ARE SHADED 1210 1812 1825 2220 2225 Reflow Only Paper/Embossed Reflow Only All Embossed Reflow Only All Embossed Reflow Only All Embossed Reflow Only All Embossed 3.20 ± 0.20 (0.126 ± 0.008) 2.50 ± 0.20 (0.098 ± 0.008) 0.50 ± 0.25 (0.020 ± 0.010) 50 100 200 4.50 ± 0.30 (0.177 ± 0.012) 3.20 ± 0.20 (0.126 ± 0.008) 0.61 ± 0.36 (0.024 ± 0.014) 50 100 200 4.50 ± 0.30 (0.177 ± 0.012) 6.40 ± 0.40 (0.252 ± 0.016) 0.61 ± 0.36 (0.024 ± 0.014) 50 100 200 5.70 ± 0.40 (0.225 ± 0.016) 5.00 ± 0.40 (0.197 ± 0.016) 0.64 ± 0.39 (0.025 ± 0.015) 50 100 200 5.72 ± 0.25 (0.225 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 0.64 ± 0.39 (0.025 ± 0.015) 50 100 200 Cap (pF) 500 䉲 L 䉲 A 0.33 (0.013) 25 W 䉲 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 25 50 SIZE Letter Max. Thickness 500 䉲 Cap (μF) 25 䉲 (t) Terminal T 䉲 (W) Width mm (in.) mm (in.) mm (in.) WVDC 0.5 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.068 0.082 0.1 WVDC 䉲 (L) Length 䉲 SIZE Soldering Packaging J J J J J J J J J J M M J J J J M M M Q Q 100 200 J J J J J J J J J J J J J J J J J J J M M M M M M M M 500 K K K K K K K K K K K K K K M M M M M M M M M K K K K K K K K K K K M M M M M M M M M M M M 25 50 1210 C 0.56 (0.022) E 0.71 (0.028) PAPER K K K K K K K K K M M M M K K K K K P P P P P X M M M M P Q Q Q Q X M M M M M M M M M M M M M M M P P P P P P 100 200 500 50 1812 G 0.90 (0.035) J 0.94 (0.037) K 1.02 (0.040) M 1.27 (0.050) M M M M M M M M M M M M M M M M M M M M M M M M M M M 100 200 X X X X X X X X X X X Y Y 50 1825 N 1.40 (0.055) P Q 1.52 1.78 (0.060) (0.070) EMBOSSED X X X X X X X X X X X 100 X X X X X X X X X X 200 2220 X 2.29 (0.090) Y 2.54 (0.100) t M M M M M M M M M M M M M M M M M P P P P P Q Q 50 M M M M M M M M M M M M M M M M Y Y P P P P P P P P P P P P P P Y Y Y Y 100 200 2225 Z 2.79 (0.110) 7