Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT711S The ACT711S is an ultra thin, plastic moulded package with a maximum height of 1.4 mm. The package contains a highly reliable cylinder type quartz crystal and is ideally suitable for automatic insertion, especially where PCB component mounting space is at a premium. Applications include Wireless Communications Equipment, Pagers, PDAs, Cellular Phones, Portable applications, and a variety of clock sources. Specification Parameter Frequency Range Frequency Tolerance Frequency v Temperature @25°C Turnover Temperature Temp. Coefficient Temp Operating Range Temp Storage Range Equivalent Series Resistance Shunt Capacitance Load Capacitance Drive Level Aging Reflow Profile 0.3 Symbol Specification fo Δf/fo TC Tp K Topr Tstg ESR C0 CL DL max Fa Tsol 32.768KHz ±20ppm / ±50ppm See Drawing +25°C ±5°C (-3.5±1.0) x 10-8/°C² -40 ~+85°C -55 ~ +125°C 65KΩ max 0.8pF typical 7.0pF / 12.5pF 1.0μW ( 0.1μW Recommended ) ±3ppm max 25°C ±3°C, First Year 260°C max x 5 secs x 2 times (max IR reflow) 7.0 max 6.7 0.6 #3 1.5 max 0.55 #1 #2 0.3 0.4 0.2 0.4 0.2 #1 #2 #4 #3 1.2 5.1 1.2 Suggested Footprint Dimensions in mm 1.4 max Temperature °C -20 -10 0 +10 +20 +30 +40 +50 +60 0 -10 Pad Plating Material SnBi -20 -30 -40 -50 -60 Δ f/f (ppm) Typical Temperature Characteristics Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency Tolerance, Load Capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 1 of 4 Issue: 6 A3 Date: 14/09/05 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT711S TAPE & REELING SPECIFICATION Standard Reel Quantity 3.000 MATERIAL Tape Reel A_PET Cardboard ORIENTATION IN CARRIER TAPE LAYOUT OF TAPE No Components 20 Pockets Minimum Cover Tape Leader 150mm Minimum Start of carrier tape bent vertically and hooked into reel slot. COVER TAPE OVERLAP In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 2 of 4 Issue: 6 A3 Date: 14/09/05 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT711S TAPE & REELING SPECIFICATION cont'd PEEL STRENGTH Using method below the force to start the tape peeling with a pull speed of 300±10 mm/min shall be 0.1~1.3N. REEL DIMENSIONS (mm) In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 3 of 4 Issue: 6 A3 Date: 14/09/05 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT711S TAPE & REELING SPECIFICATION cont'd CARRIER TAPE DIMENSIONS (mm) ACT711S REFLOW SOLDERING PROFILE Temperatures are PCB temperatures. In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 4 of 4 Issue: 6 A3 Date: 14/09/05