ACT801 Product Brief, 22-Oct-12 Active Direct Drive™ LED Driver FEATURES GENERAL DESCRIPTION • • • • • • • • • • • • • The ACT801 are LED driver ICs based on ActiveSemi's Patented Active Direct DriveTM Technology and Patent-Pending Active Valley FillTM that adaptively drives a string of variable-weighted LED segments up to 8W directly from an AC line voltage with very few total components. By adaptively modulating the variable-segment-weighted LED string voltage to match the varying AC line voltage, the Active Direct DriveTM Technology results in the ACT801 having highest efficiency, high power factor (> 0.90), and low total harmonic distortion. The high efficiency and high performance make the ACT801 ideal for advanced energy saving solid state lighting applications and eases thermal design. Highest Efficiency Solution Up to 8W High Power Factor (> 0.90) Low Total Harmonic Distortion Low Component Count Low EMI Low Crest Factor No Flicker Low Strobe Light Motion Effect No Electrolytic Capacitor No Magnetic Components Over Temperature Protection Over Current Protection Brightness Stability over AC Line Voltage Variation • Space-Saving, Thermally-Enhanced SOP-16 EP (Exposed Pad) Package • ACT801 for 100-120VAC Application APPLICATIONS • Solid State Lighting (SSL) • LED Light Bulbs • Replacement of Lamps for 100-120VAC With very few external components, the ACT801 ensures high reliability and long life time for LEDbased luminaire designs. In addition, the IC protects the LEDs from over current, and over temperature conditions. The ACT801 are optimized to operate at 100-120VAC and non-dimmable application up to 8W. The ACT801 also incorporate Active-Semi's PatentPending Active Valley FillTM Technology for maintaining smooth light output for the full AC cycle, enabling the LEDs to operate without noticeable flicker or strobe light motion effects. These devices drive the LED string without high frequency switching. The ACT801 are available in the SOP-16EP package. TYPICAL APPLICATION DIAGRAM Innovative PowerTM -1Active Direct Drive™ and Active Valley Fill™ are trademarks of Active-Semi www.active-semi.com Copyright © 2012 Active-Semi, Inc. ACT801 Product Brief, 22-Oct-12 ORDERING INFORMATIONcd PART NUMBER TEMPERATURE RANGE PACKAGE PINS PACKING METHOD ACT801YK-T -40°C to 125°C SOP-16EP 16 TAPE & REEL c: All Active-Semi components are RoHS Compliant and with Pb-free plating unless specified differently. The term Pb-free means semiconductor products that are in compliance with current RoHS (Restriction of Hazardous Substances) standards. d: Standard product options are identified in this table. Contact factory for custom options. PIN CONFIGURATION VIN 1 16 VP N/C 2 15 N/C N/C 3 14 TOP VN 4 13 SWD N/C 5 12 SWC N/C 6 11 SWB ISET 7 10 SWA MODE 8 9 IREG EP (VSS) ACT801 TOP VIEW SOP-16EP Innovative PowerTM -2Active Direct Drive™ and Active Valley Fill™ are trademarks of Active-Semi www.active-semi.com Copyright © 2012 Active-Semi, Inc. ACT801 Product Brief, 22-Oct-12 PIN DESCRIPTIONS PIN NAME DESCRIPTION 1 VIN Voltage Input. Connect to the positive output of the full bridge rectifier. 2 N/C Not Connected. 3 N/C Not Connected. 4 VN Negative Supply Voltage. Connect to the negative output of the full bridge rectifier. 5 N/C Not Connected. 6 N/C Not Connected. 7 ISET Current Setting. Connect a resistor between ISET and VSS to determine the LED current. 8 MODE MODE Selection. 9 IREG Current Regulation Output. Connect to the bottom of LED string. 10 SWA LED Switch A. 11 SWB LED Switch B. 12 SWC LED Switch C. 13 SWD LED Switch D. 14 TOP LED String Top. Connect to the top of LED string. 15 N/C Not Connected. 16 VP Positive Supply Voltage. Connect a ceramic capacitor with appropriate voltage rating between VP pin and VSS pin. EP VSS Ground. Exposed Pad shown as dashed block. The exposed ground pad must be electrically connected to Ground. Innovative PowerTM -3Active Direct Drive™ and Active Valley Fill™ are trademarks of Active-Semi www.active-semi.com Copyright © 2012 Active-Semi, Inc. ACT801 Product Brief, 22-Oct-12 SOP-16 EP (EXPOSED PADDLE) PACKAGE OUTLINE AND DIMENSIONS E DIMENSION IN MILLIMETERS DIMENSION IN INCHES MIN MAX MIN MAX A 1.350 1.700 0.053 0.067 A1 0.020 0.120 0.001 0.005 A2 1.350 1.550 0.053 0.061 b 0.380 0.470 0.015 0.019 c 0.200 0.250 0.008 0.010 D 9.860 10.06 0.388 0.396 D1 3.300 4.000 0.130 0.157 E 3.800 4.000 0.150 0.157 E1 5.800 6.200 0.228 0.244 E2 1.780 2.500 0.070 0.098 D D1 SYMBOL b e E2 A1 E1 A2 A θ L c e 1.270 TYP 0.050 TYP L 0.450 0.800 0.018 0.031 θ 0° 8° 0° 8° Active-Semi, Inc. reserves the right to modify the circuitry or specifications without notice. Users should evaluate each product to make sure that it is suitable for their applications. Active-Semi products are not intended or authorized for use as critical components in life-support devices or systems. Active-Semi, Inc. does not assume any liability arising out of the use of any product or circuit described in this datasheet, nor does it convey any patent license. Active-Semi and its logo are trademarks of Active-Semi, Inc. For more information on this and other products, contact [email protected] or visit http://www.active-semi.com. is a registered trademark of Active-Semi. Innovative PowerTM -4Active Direct Drive™ and Active Valley Fill™ are trademarks of Active-Semi www.active-semi.com Copyright © 2012 Active-Semi, Inc.