Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT HC49/U ( Standard Devices ) The ACT HC49U family is available in industry standard package and specifications. This series offers a broad range of frequencies and tolerances in both standard and industrial temperature ranges. Housed in resistance welded cases the HC49U offers excellent aging characteristics. Cost / performance ratios are extremely good for this family of devices and they offer reasonably high density mounting capability, where height isn't a restriction. Low frequencies are also more readily available in this type of package. Various optional packages and custom specifications are available - PLEASE SEE SEPARATE DATA SHEET FOR ACT HC49/U ( CUSTOM OPTIONS ) Specification Parameter Specification Symbol fo Frequency Range ∆f/fo Τopr ∆f/Fo Tstg ESR CO CL DL max DLD IR Fa Frequency Tolerance @25°C Temp Operating Range Stability over Temp Range °C Temp Storage Range Equivalent Series Resistance Shunt Capacitance Load Capacitance Drive Level Drive Level Dependency Insulation Resistance Aging Condition 1.8432MHz ~ 150MHZ Please specify Fundamental & 3rd to 7th O/T ±5ppm ~ 100ppm (30ppm Std ) Please specify -10~+60°C,-20~+70°C & -40~+85 Please specify Please see table 2 Please specify -40°C to +85°C Please see table 1 Dependent on cut & frequency 7pF max 8 ~ 55pF or SR Please specify 100µW typ Options available - please enquire ∆ Freq & ESR 0.01, 0.1, 1, 10, 50, 100 mW steps 500MΩ Min @ DC 100V ±15V ±3ppm / year max@25°C ESR and mode of oscillation Table 1 ESR (Ω) max Frequency (MHz) Mode ESR (Ω) Frequency (MHz) Mode 1.8432 ~ 1.999 2.000 ~ 2.399 350 300 AT Fund AT Fund 7.000 ~ 9.999 10.000 ~ 12.999 30 20 AT Fund AT Fund 2.400 ~ 2.999 200 AT Fund 13.000 ~ 30.000 20 AT Fund 3.000 ~ 3.199 150 AT Fund 24.000 ~ 29.999 50 3rd Overtone 3.200 ~ 3.499 100 AT Fund 30.000 ~ 65.000 40 3rd Overtone 3.500 ~ 3.899 90 AT Fund 60.000 ~ 99.999 90 3rd Overtone 3.900 ~ 4.099 70 AT Fund 90.000 ~ 120.000 90 5th Overtone 4.100 ~ 5.999 60 AT Fund 120.000 ~ 150.000 90 7th Overtone 6.000 ~ 6.999 Table 2 50 AT Fund Frequency stability Vs operating temperature range Stability Temp ±10ppm ±15ppm ±20ppm ±25ppm ±30ppm ±50ppm -10 ~ +60°C -20 ~ +70°C -40 ~ +85°C Enquire Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating Temperature Range, Load Capacitance & Mode In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Issue: 9 SCB Date 20-11-2012 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT HC49/U ( Standard Devices ) Standard Frequencies (MHz) 1.8432 4.4336 7.3728 12.0000 20.0000 50.0000 2.0000 4.9152 7.3728 12.2880 22.1184 56.4480 2.0974 5.0000 7.6800 13.0000 24.0001 60.0000 2.4576 5.0688 8.0000 13.8750 24.5760 64.0000 2.8224 5.1200 8.1920 14.0000 25.0000 3.0000 5.1850 8.6724 14.3182 27.0000 3.2768 5.7143 9.0000 14.7456 28.2240 3.5795 6.0000 9.2160 15.0000 28.6364 3.6000 6.1440 9.8304 16.0000 29.4912 3.6864 6.1760 10.0000 16.3840 30.0000 3.9322 6.4000 10.2450 16.9344 32.0000 4.0000 6.5536 10.7520 17.7345 32.7680 4.0320 6.5539 11.0000 18.0000 36.0000 4.0960 7.0000 11.0592 18.4320 40.0000 4.1943 7.1591 11.2896 19.6608 48.0000 Package / Packaging Options With insulating washer Cropped leads (3.5mm, 5mm, 7mm) Tape and reel, see page 3 In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Issue: 9 SCB Date 20-11-2012 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Issue: 9 SCB Date 20-11-2012 SERIES : ACT HC49/U ( Standard ) Device series code GO Example : GO (HC49/U) 1200 I K G RO F L (12.000MHz ) (±30ppm) (±30ppm) (-20+70) (16pF) (Fund') (Loose ) Frequency Device Height Code Max: GO = 13.5mm Cropped leads BD = 3.5mm BC = 5.0mm BB = 7.0mm SA = Washer Fitted To 99.9999MHz 1st four digits of Frequency & >99.9999MHz 1st five digits of Frequency Examples 0983 = 9.8304MHz 1200 = 12.000MHz 9999 = 99.9999MHz 10000 = 100.00MHz NB: - PF (RoHS) Tolerance (±pm) @ 25ºC A 5 E F G I L 10 15 20 30 50 Operating Temperature Range (ºC) Std E G -10+60 -20+70 M -40+85 Load Capacitance ( pF or Series GO JO KO MO OO ZO PO RO TO VO AA BA DA FA JA SR Std Stability Over Operating Temperature (ºC) F G I J K O It is important to suffix the above P/No with the full frequency required to give a complete P/No as illustrated below 10 15 20 25 30 50 Std A F Mode 3rd O/T RoHS Comp' - PF Fundamental 8 9 10 11 12 14 15 16 18 20 24 25 30 33 50 SR Packaging Std L = Loose C =1K T&R Commodity code 854160 00 00 Available Stabilities Full Example Part Number GO1200IKGROFL-PF 12.00MHz Stability Temp ±10ppm ±15ppm ±20ppm ±25ppm ±30ppm ±50ppm -10 ~ +60°C -20 ~ +70°C -40 ~ +85°C Enquire NOTES : 1) Tighter Tolerances and Stabilities, other Operating Temperature Ranges and CL's may be available as semi custom devices. As each of these specification parameters impact on each other, it is not always possible to combine all options in one device. Therefore, if a specification not catered for above is required, please contact us directly for the relevant part number code(s). 2) ACT are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested AQL requirements, non standard packaging or taping and reeling and custom marking. Such devices would normally be allocated a custom specification part number which is wholly customer specific. ( MOQ Dependent ) ( EG : A 12.00MHz custom ACTHC49/U device may have a part number such as GO1200C- C1246-PF) 3) Frequencies below 10.000MHz are prefixed with a "0" (eg: 0800MHz = 8MHz.Whereas 10.000MHz is 1000 and 100.00MHz is 10000) ISO9001 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, United Kingdom http:www.actcrystals.com Issue: 9 SCB Date 20-11-2012