ADAM-5000L/TCP ADAM-5000/TCP 4-slot Ethernet-based Distributed DA&C System 8-slot Ethernet-based Distributed DA&C System Features ADAM-5000/TCP ADAM-5000L/TCP ARM 32-bit RISC CPU 10/100Base-T auto-negotiation high-speed communication port Supports Modbus/TCP for easy integration Supports UDP event handling function Up to 100 m communication distance w/o repeater Allows remote configuration via Ethernet Allows concurrent access for 8 host PCs 4 I/O slots for up to 64 points and 8 I/O slots for up to 128 points data monitoring and control 1500 VDC isolation for Ethernet communication Built-in watchdog timer for system auto-reset Windows utility - I/O modules configuration and calibration - Network auto searching - Data stream setting - Current status monitoring and alarm trigger Provides .NET Class LIB to develop applications Introduction ADAM-5000L/TCP and ADAM-5000/TPC are both Ethernet-based I/O systems. Without a repeater, ADAM-5000L/TCP and ADAM-5000/TCP can cover a communication distance up to 100 m. This allows remote configuration via Ethernet and eight PCs can simultaneously access the data. The ADAM-5000L/TCP and ADAM-5000/TCP are the solutions for easy configuration and efficient management. An ideal and cost-effective solution for eAutomation architecture. Specifications Power Input Software Control System CPU I/O Slots Memory Operating System LED Indicators 32-bit ARM RISC ADAM-5000L/TCP:4 ADAM-5000/TCP: 8 Flash ROM: 512 KB RAM: 4 MB Real-time OS Power (3.3 V, 5 V) CPU Communication (Link, Active, 10/100 Mbps, Tx, Rx) Battery Communications (Ethernet) Comm. Distance Comm. Protocol Data Transfer Rate Event Response Time Interface Wiring 100 meters w/o repeater Modbus/TCP, TCP, UDP, IP, ARP Up to 100 Mbps < 5 ms 1 x 10/100Base-T (RJ-45) UTP, category 5 or greater Communications (Serial) Comm. Distance Comm. Protocol Data Transfer Rate Interface Max. Nodes RS-485: 1.2 km (4000 feet) RS-232: 15 m Modbus/RTU Up to 115.2 kbps 1 x DB9-M for RS-485 1 x DB9-F for RS-485 1 x DB9-F for RS-232 12 (in RS-485 daisy-chain network for Remote I/O connection) Power Power Consumption Unregulated 10 ~ 30 VDC 4.0 W @ 24 Vdc (ADAM-5000L/TCP) (not including I/O modules) 5.0 W @ 24 Vdc (ADAM-5000/TCP) (not including I/O modules) .NET Class LIB Windows Utility Network setting, I/O configuration & calibration, data stream, alarm setting Modbus/TCP OPC Server Protection Communication Line Isolation I/O Module Isolation LAN Communication Overvoltage Protection Power Reversal Protection 3000 VDC 3000 VDC 1500 VDC Yes Yes General Certifications Connectors CE, FCC class A 1 x DB9-M/DB9-F/screw terminal for RS-485 (communication) 1 x DB9-F for RS-232 (internal use) 1 x Screw-terminal for power input 1 x RJ-45 for LAN Dimensions (W x H x D)ADAM-5000L/TPC:231 x 110 x 75 mm ADAM-5000/TCP: 355 x 110 x 75 mm Enclosure ABS+PC Mounting DIN 35 rail, wall Environment Humidity 5 ~ 95%, non-condensing Operating Temperature - 10 ~ 70° C (14 ~ 158° F) Storage Temperature - 25 ~ 85° C (-13 ~ 185° F) Ordering Information ADAM-5000L/TCP ADAM-5000/TCP Programmable Automation Controllers & Software 4-slot Ethernet-based Distributed DA&C System 8-slot Ethernet-based Distributed DA&C System ADAM-5000L/TCP ADAM-5000/TCP DB9-M for RS-485 DB9-F with RS-232 for Power Terminal Internal Use Wallmounting Hole Snap Lock Diagnostic LEDs Ethernet Port (Modbus/TCP) Industrial Connector Plug-in Terminal DB9-F for RS-485 Node ID Switch Feature Details Communication Network Hardware Capacity & Diagnostics With a 32-bit RISC CPU, ADAM-5000/TCP and ADAM-5000L/TCP greatly enhances data processing performance and ability, especially in network communication. There is a standard RJ-45 modular jack Ethernet port on the ADAM-5000/TCP and ADAM5000L/TCP's CPU board, and the field I/O modules are able to link to an Ethernet network directly without any other converter or data gateway. The communication speed can be auto-switched between 10 Mbps and 100 Mbps data transfer rates, depending on the network environment. In addition, ADAM-5000/TCP and ADAM-5000L/TCP can be used as an Ethernet data gateway. It provides an RS-485 interface to integrate serial devices supporting the Modbus/RTU protocol. ADAM-5000/TCP and ADAM-5000L/TCP is designed with high I/O capacity and supports all types of ADAM-5000 I/O modules. Providing 8/4 slots for any mixed modules, this DA&C system handles up to 8/4 modules, providing 128/64 I/O points points (only four ADAM-5024s allowed). Different from other main units, the ADAM-5000/TCP and ADAM-5000L/TCP has not only higher I/O capacity, but also smarter diagnostics ability. There are eight indicators on the front case of the CPU module. Users can read the system status clearly, which includes power, CPU, Ethernet link, communication active, communication rate, etc. In addition, there are also Tx and Rx LEDs on the Ethernet port, indicating data sending and receiving. Modbus/TCP Protocol Event Handling & Data Streaming Modbus/TCP is one of the most popular standards used for industrial Ethernet networks. Using this communication protocol, ADAM-5000/TCP and ADAM-5000L/TCP is easy to integrate with any HMI software packages or user-developed applications which support Modbus. Users do not have to prepare a specific driver for the ADAM-5000/TCP and ADAM-5000L/TCP when they install the DA&C system with their own operating application. It reduces required engineering efforts. Moreover, ADAM-5000/TCP and ADAM-5000L/TCP works as a Modbus data server as well. It allows eight PCs or tasks to access its current data simultaneously, no matter if they connect from LAN, an intranet, or the Internet. Though TCP/IP is the standard communication protocol for Ethernet, data transmission management is still a bottleneck when many clients are on the network at the same time. Therefore, the ADAM-5000/TCP and ADAM-5000L/TCP also supports the UDP protocol to deal with regular data stream broadcasting and event/alarm triggering. These functions will upgrade your system with intelligence and performance. Isolated Communication High speed transient suppressors isolate the ADAM-5000/TCP and ADAM-5000L/TCP Ethernet port from dangerous voltage up to 1500 VDC power spikes and avoid surge damage to the whole system. Online Download www.advantech.com/products