AGB3304 50Ω High IP3 Low Noise Wideband Gain Block ADVANCED PRODUCT INFORMATION - Rev 0.0 FEATURES • On-chip Active Bias • 250-2500 MHz Frequency Range • +39 dBm Output IP3 at 850 MHz • 5 dB Noise Figure at 850 MHz • 18 dB Gain at 850 MHz • +22 dBm P1dB • SOT-89 Package • Single +5 V Supply • Case Temperature: -40 to +100 °C APPLICATIONS • Cellular Base Stations for W-CDMA, CDMA, TDMA, GSM, PCS and CDPD systems • Fixed Wireless • MMDS/WLL • WLAN S24 Package SOT-89 PRODUCT DESCRIPTION The AGB3304 is one of a series of high performance InGaP HBT amplifiers designed for use in applications requiring high linearity, low noise and low distortion. Active bias circuits on-chip eliminate the need for external resistive feedback. With a high output IP3, low noise figure, and wide band operation, the AGB3304 is ideal for 50 Ω wireless infrastructure applications such as Cellular Base Stations, MMDS, and WLL. Offered in a low cost SOT-89 surface mount package, the AGB3304 requires a single +5 V supply, and typically consumes 0.6 Watts of power. RF Output / Bias RF Input Active Bias Figure 1: Block Diagram 01/2003 AGB3304 GND 4 1 2 3 RF IN GND RF OUT Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME 1 RFIN RF Input 2 GND Ground 3 RFOUT RF Output / Bias 4 GND Ground DESCRIPTION ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2003 AGB3304 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Device Voltage (VCC) 0 +6 VD C RF Input Power (PIN) - +10 dB m -40 +150 °C - +200 °C Storage Temperature (TSTG) Junction Temperature Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 250 - 2500 MHz Supply Voltage (VSUPPLY) - +5 - VD C Case Temperature (TC) -40 - +100 °C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2003 3 AGB3304 Table 4: Electrical Specifications (TA = +25 °C, VSUPPLY = +5 VDC, see Application Circuits (2)) PARAMETER MIN TYP MAX UNIT 850 MHz 1950 MHz 2140 MHz - 18 14 13.5 - dB dB dB 850 MHz 1950 MHz 2140 MHz - +39 +37 +37 - dB m dB m dB m - +22 - dB m - 5.2 - dB Thermal Resistance ( θJC) - 94 - °C/W Supply Current - 120 - mA Gain (S21) Output IP3 (1) Output 1dB Compression (P1dB) Noise Figure 850 MHz Notes: (1) OIP3 is measured with two tones at 1 MHz spacing at 0 dBm output power per tone. (2) Performance as measured on ANADIGICS test fixture, using the appropriate Application Circuit (see Figures 3 through 5). +5 VDC All capacitors are muRata GRM39 series. The 100 nH inductor is a Coilcraft 0603CS series. The 4.7 nH inductor is a Toko LL1608 series. 10 pF 100 pF 0.01 µF 100 nH 9 pF RF Input 5.6 pF 0.01 µF AGB3304 4.7 nH 0.01 µF 0.5 pF RF Output 1.2 pF Figure 3: 850 MHz Application Circuit (50 Ω Terminations) 4 ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2003 AGB3304 +5 VDC All capacitors are muRata GRM39 series. The 100 nH inductor is a Coilcraft 0603CS series. The 6.8 nH inductor is a Toko LL1608 series. 10 pF 100 pF 0.01 µF 100 nH 6.8 nH 0.01 µF RF Input 0.01 µF AGB3304 RF Output 1.0 pF Figure 4: 1950 MHz Application Circuit (50 Ω Terminations) +5 VDC All capacitors are muRata GRM39 series. The 100 nH inductor is a Coilcraft 0603CS series. The 5.6 nH inductor is a Toko LL1608 series. 10 pF 100 pF 0.01 µF 100 nH 5.6 nH 0.01 µF RF Input AGB3304 0.01 µF RF Output 0.5 pF Figure 5: 2140 MHz Application Circuit (50 Ω Terminations) ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2003 5 AGB3304 PACKAGE OUTLINE Figure 6: S24 Package Outline – SOT-89 3304 LLLLNN LLLL= FOUR NUMERIC CHARACTERS Figure 7: Branding Specification 6 ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2003 AGB3304 NOTES ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2003 7 AGB3304 ORDERING INFORMATION PART NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AGB3304S24Q1 -40 to +100°C SOT-89 Package 1,000 piece Tape and Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: [email protected] IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 8 ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2003