06-Accessories_p_225-236_2.qxd 17.03.2008 20:05 Uhr Seite 229 Accessories Connectors (Production Europe only) Catalog 1308028-2 Revised 3-2008 Connectors for Mini ISO Relays Features Connectors in 3 different versions – PCB Socket With the solderable connector Mini ISO relays with plug-in terminals can be mounted on leadframes. This allows easy and reasonable replacement in case of service. – Connector 5 pole connector with snap-in pin to lock in frame. – Connector with Mounting Flap 5 pole connector that can be mounted individually or interlocked. The connector has a snap-in pin to lock in frame. The mounting bracket also allows screw-on. Please order terminals separately. For AWG Conversion Table see page 236. Please contact Tyco Electronics for relay application support. 333_3Dco1 Weight Conditions – PCB Socket Approx. 7.0 g (0.25 oz.) All parametric, environmental and endurance tests are performed according to EIA Standard RS-407-A at standard test conditions unless otherwise noted: 23°C ambient temperature, 20 - 50% RH, 998.9 ±33.9 hPa. – Connector Approx. 3.9 g (0.11 oz.) – Connector with Mounting Flap Approx. 20.6 g (0.71 oz.) For general storage and processing recommendations please refer to our Application Notes and especially to Storage in the “Glossary” page 23 or at http://relays.tycoelectronics.com/ appnotes/ Disclaimer All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of the relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and to request our technical service. Any responsibility for the application of the product remains with the customer only. All specifications are subject to change without notification. All rights of Tyco Electronics are reserved. All specifications subject to change. Consult Tyco Electronics for latest specifications. 229 06-Accessories_p_225-236_2.qxd 17.03.2008 20:05 Uhr Seite 230 Accessories Connectors (Production Europe only) Catalog 1308028-2 Revised 3-2008 Connectors for Mini ISO Relays PCB Socket V23333-Z0002-A041 (Mounting Recommendation: To keep insertion force away from the PCB the soldering of the socket to the PCB should be done with already inserted relay) 0,1 8 8,7 18,2 3,2 6,5 0,1 14,5 0,1 333_41_DD2 Connector V23333-Z0001-A007 (Terminals to be ordered separately) 333_7_DD2 Connector with Mounting Flap (To be mounted individually or can be interlocked) V23333-Z1001-A008 (Terminals to be ordered separately) 333_8_DD2 230 All specifications subject to change. Consult Tyco Electronics for latest specifications. 7,5 13 1,8 0,05 26,5 7 0,05 7,5 7,5 13 17,4 0,1 0,1 0,1 2,5 0,05 0 -0,1 24 11,9 6,5 10 +0,3 0 2 0,05 2 0,1 0,1 06-Accessories_p_225-236_2.qxd 17.03.2008 20:05 Uhr Seite 231 Accessories Connectors (Production Europe only) Catalog 1308028-2 Revised 3-2008 Connectors for Mini ISO Relays Ordering Information Part Numbers for Connectors Connector Tyco Electronics Description Part Number 1) 2) V23333-Z0002-A041 2-1904045-4 V23333-Z0001-A007 1-1904045-1 V23333-Z1001-A008 1-1904045-2 Terminal Size – 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 6.3 x 0.8 Selection of Fitting Crimp Terminals 1) (Ph. bronze tin plated) 2) Tyco Electronics Wire Use Quantity Required Use in Cavities Part Number mm2 for Form A Form C Form A Form C – 5-160526-9 0-0160927-4 5-160526-9 0-0160927-4 – 0.5 - 1.5 1.0 - 2.5 0.5 - 1.5 1.0 - 2.5 – Coil Load Coil Load – 2 2 2 2 – 2 3 2 3 – 1 and 2 3 and 5 1 and 2 3 and 5 – 1 and 2 3, 4 and 5 1 and 2 3, 4 and 5 Crimp terminals to be ordered separately. Mentioned crimp terminals are delivered in strip-form, loose pieces and hand tool available on request. Standard Delivery Packs (orders in multiples of delivery pack) Connector V23333-Z0002-A041: 500 pieces Connector V23333-Z0001-A008: 500 pieces Connector V23333-Z1001-A007: 200 pieces All specifications subject to change. Consult Tyco Electronics for latest specifications. 231